MatLab

美 　英

• 網絡矩陣實驗室；數學軟件；工具箱

例句

Through examples of calculation and an result of contrast simulation by Matlab, verification of its feasibility and effectiveness was given.

通過實例計算和對比仿真，驗證模型的合理性和有效性。

This is an addendum to the MATLAB simulation of a small ball on the whereabouts of course, very good, and he hopes to share with you.

這是一個用MATLAB編的模擬一個小球的下落過程，很不錯，希望和大家分享。

The system simulation method and the MATLAB software were used to build a detailed model of a vehicle shock absorber.

采用系統仿真方法及MATLAB軟件，建立汽車減振器的詳細模型，并進行仿真研究。

His job allows him to evangelize about MATLAB by traveling around the country to various universities and companies.

他的工作讓他將MATLAB的福音傳遍全國各大學和公司。

It carried out in the MATLAB simulation, experimental test proof that the results of this image mosaic method are very satisfactory.

并且給出了圖像拼接的MATLAB仿真結果。實驗表明，該算法能夠獲得較為滿意的拼接效果。

Finally, the MATLAB was used to simulate the load torque observer, and the observer is proved to be valid by the simulation result.

最后利用計算機仿真工具MATLAB對負載轉矩觀測器進行了仿真分析，結果證實是有效的。

The results of simulation computing by MATLAB indicate that this model is completely controllable, completely seeable and steady.

通過MATLAB仿真計算證明：該模型完全能控、完全能觀和漸進穩定。

CRC through analysis and simulation tool based on MATLAB, and fully proves that the CRC error detection ability of a strong, simple coding.

通過對CRC的分析和基于MATLAB工具的仿真，充分證明了CRC的檢錯能力很強，編碼簡單。

Response graphs were got by MATLAB simulation to make a further understanding of the system nonlinearity and instability.

在此基礎上，基于MATLAB仿真得出系統的響應曲線，對系統對象的非線性及不穩定性有進一步的了解。

The application results show that the MATLAB program of AHP can be used to do multi-factors risk analysis for underground engineering well.

結果表明，層次分析法結合MATLAB應用，能較好地進行地下工程多因素的風險分析。

this document is mainly targeted at PSO algorithm in Matlab environment application to the preparation of that document m!

本文件主要是針對于粒子群算法在matlab環境中地應用說編寫地m文件！

The display interface can be designed by the GUI toolbox of MATLAB, which can display the acquisition data and its processing result timely.

利用MATLAB的GUI工具箱編制了較為完善的顯示界面，使得采集的數據以及其處理結果能夠得以實時的顯示。

The main body of a book is explained mainly from a circuits train of thought of simulated MATLAB physics malfunction.

本文主要解釋由MATLAB仿真物理故障電路的一個思路。

For each time increment, the approximation of each unknown nodal function can be solved with the matrix left division command in MATLAB.

在每一個時間步長，利用MATLAB提供的矩陣左除命令即可求出各個未知節點的函數近似值。

Smart Antenna Pattern algorithm simulation program Matlab, very convenient, can be seen running on the direction of Fig.

LCMV算法智能天線Matlab仿真程序，非常好用，運行就可以看到方向圖。

Let the MATLAB be applied to the calculation of reliability, the rapid calculation method of reliability for mechanical parts was presented.

將MATLAB應用于可靠度計算中，給出了機械零件可靠度的快速計算方法；

Using MATLAB to carrying out simulation and analyzed the law of affection of the structural parameters of foam metal on the damping force.

利用MATLAB進行了仿真，分析了泡沫金屬的結構參數對阻尼力影響規律。

ABSTACT: MATLAB language is the internationally recognized one of the outstanding mathematical application software.

MATLAB語言是國際公認的優秀數學應用軟件之一。

Presents the intelligence control system and MATLAB simulation. The results represent the system has achieved the anticipated effect.

為此，建立了一個智能控制系統，進行了MATLAB仿真，達到了預期的控制效果。

MATLAB-based Face Detection procedures, The code of face detection algorithm is a concrete realization of a very good reference value.

詳細說明：基于MATLAB的人臉檢測程序，該代碼對人臉檢測算法的具體實現有很好的參考價值。

Typical examples of modeling flat fading channels in MATLAB were simulated specifically by means of user-defined m-files.

另外重點通過自定義Matlab環境下的M文件對無線信道的典型例子，即平坦衰落信道進行了仿真。

Numerical simulation is carried out with MATLAB and PLAS programming to verify the proposed approach.

本研究以MATLAB和PLAS程式實現數值模擬來驗證所提出的方法。

By the numerical calculation in MATLAB, the innovative diffusion coefficient and innovative influence coefficient are quantitative analyzed.

經過MATLAB數值分析，定量研究了創新擴散率系數和創新影響率系數對作戰能力影響的靈敏度。

Meanwhile, it introduces MATLAB and illustrates the advantages and functions of this software using in the mathematical experiment teaching.

同時，簡要地介紹了MATLAB軟件，并舉例說明了利用其進行數學實驗教學的優點和作用。

SIMULINK tools in MATLAB were used to simulate a turbofan engine digital control system's hydraulic mechanical backup unit in this paper.

使用MATLAB軟件中SIMULINK工具，實現對某型發動機數控系統液壓機械備份裝置的仿真。

The book also includes: a glossary of MATLAB commands appendices of mathematical techniques used in numerical methods.

書也包括：一個MATLAB的詞匯表命令用數值法使用的數學技術的附錄。

It is testified that this method was effective way to extract and reconstruction image skeleton by simulating in the MATLAB.

通過在MATLAB中的仿真，驗證了此方法是提取骨架與重建圖象的一種有效方法。

Finally, the curve fitting of cavity nodes was accomplished by MATLAB software to obtain the curve used to CNC machine cutting.

最后利用MATLAB軟件對所求型腔節點進行曲線擬合，獲得了可用于模具數控加工的曲線函數。

Monte Carlo Simulation of light scattering process, a random distribution of particles can definitely make a direct run.

matlab郵電通訊系統Post-TeleComsofewaresystems，蒙特卡羅模擬光散射程序，粒子隨機分布，絕對可以直接運行。

Discussed and compared the zero-forcing and MMSE equalization methods, and MATLAB? simulation comparing the performance of two methods.

文中討論并比較了迫零和最小均方誤差兩種均衡方法，并通過MATLAB？仿真比較了兩種方法的性能。

This essay introduces several methods to deal with the data in modern physical experiment by the language of the MATLAB.

介紹了用MATLAB處理近代物理實驗中的數據的幾個方法。

RLS algorithm, the preparation of a MATLAB program to achieve adaptive interference cancellation.

RLS算法，編寫了MATLAB程序實現自適應干擾對消。

Chengdu metro is as the case of solving the optimization problem by MATLAB.

并以成都地鐵作為案例運用MATLAB進行大軸承主參數優化求解。

In view of this, I am not at all with the realization of genetic algorithm matlab knapsack problem solve and stay more than a qq.

鑒于此，本人自己完全用matlab實現遺傳算法解決多背包問題并留了qq。

This location will be specific to your environment and depends on the location of the MATLAB installation.

這個位置特定于您的環境，取決于MATLAB安裝的位置。

This thesis analyzes two aspects both the theory and MATLAB simulation, verifying the theoretical feasibility of this method.

從理論和MATLAB仿真兩方面進行了分析，驗證了該方法理論上的可行性。

A new method was introduced to solve the units' optimal load dispatch problem by means of MATLAB toolboxes .

提出一種利用MATLAB工具箱解決機組負荷優化分配的方法。

Simultaneously, MATLAB software was used to simulate the under-damped second-order linear system.

同時，利用MATLAB軟件對此二階欠阻尼線性系統做了仿真研究。

The numerical solution can be obtained by calling matrix left division command in MATLAB only once for the linear SCLC model.

對于線性模型，只需要調用一次MATLAB矩陣左除命令即可獲得其數值解。

At last, we test the superior dynamic and steady-state control performance of the fuzzy PID controller through the MATLAB simulation.

最后通過MATLAB仿真驗證了模糊PID制約器優越的動態和穩態制約性能。