core-shell

美 　英

• 網絡核殼；核殼結構；核殻

例句

Study on character of which the core-shell Cu- Sn bimetallic nanoparticles is not easy to be oxidized in the air.

研究了納米核殼式銅-錫雙金屬粉在空氣中不易氧化的特性。

Result showed the recycled PC blends cannot be toughened due to the incompatibility between the PC and core-shell structure silicon rubber.

研究表明：兩相不相容導致“核-殼”型硅橡膠與PC回收料共混沒有增韌效果。

TEM images and IR spectra show that the AA was polymerized on the surface of PS particles and core-shell structure formed.

TEM照片和紅外光譜表明AA在PSt粒子表面聚合形成表面羧基化的核殼結構粒子。

The core-shell nanoparticle developed by researchers at Brown University and Oak Ridge National Laboratory addresses both of these problems.

該核殼納米粒子的研究人員開發的布朗大學和橡樹嶺國家實驗室這些問題都解決了。

And the hollow nickel spheres and core- shell particles with specific structures can be fabricated by controlling processing parameter.

通過控制工藝參數，可以得到不同結構的空心金屬鎳粉末或是包含有細小核心的粉末。

Testing results showed that the core-shell copolymer synthesized was of high elasticity and excellent stain resistance.

結果表明，合成的核-殼乳液具有高彈性的和優良的耐沾污性。

The core-shell structure silicon rubber could enhance the flame retardant as well as roughed the recycled PC significantly.

“核-殼”型硅橡膠不僅可以有效地增韌PC回收料，也能顯著提高其阻燃性能。

Epoxy - acrylic hybrid emulsion with core- shell structure was prepared by semi - continuous seed emulsion polymerization method.

采用半連續種子乳液聚合法制備具有核殼結構的環氧-丙烯酸酯復合乳液。

ACR resin with multi - layer core - shell construction was synthesized by multi - stage emulsion polymerization.

采用多步乳液聚合方法合成多層核殼結構的ACR樹脂。

It was shown that the epoxy resin and acrylate have copolymerized and the core-shell structure formed.

結果表明：環氧樹脂與丙烯酸酯發生了接枝反應，并形成核殼結構。

Preparation and characterization of core-shell composite microspheres.

核殼型復合微球、空心微球的制備及表征。

Due to the advantages of core-shell type fluorescent nanoparticles, this year has been draw widespread concern.

用于多組份同時標記的核殼型熒光納米顆粒由于具有諸多的優點，近年來引起了人們廣泛的關注。

TEM showed uniform structured composite latex particle morphology and obvious core-shell structure.

TEM顯示，復合乳膠粒子形態均勻規整，并呈現明顯的核殼結構。

A room temperature film formation and low VOC acrylic finishing coatings has been prepared by core-shell structure emulsion polymerization.

用核-殼乳液聚合方法制備了室溫成膜低VOC丙烯酸類上光涂料。

The size and size distribution of core-shell particles, PBA as core and PMMA as shell, are studied by dynamic light scattering.

用動態光散射方法研究了以聚丙烯酸丁脂（PBA）為核、聚甲基丙烯酸甲脂（PMMA）為殼的核殼雙層納米顆粒的粒徑和粒徑分布。

The results showed that: POSS-PCL-PNIPAM micelles with core-shell structure had regular spherical structure.

結果表明：POSS-PCL-PNIPAM膠束呈規整球形結構，并且具有核殼結構。

Add the crosslinking monomer to improve core-shell interpenetrating network.

加入了交聯單體，提高核殼的交聯度；

The preparation method of anticorrosion core-shell copolymer emulsion was described in this thesis.

簡述了防腐核殼共聚乳液的制備方法。

Research progress of polysiloxane core-shell particles in recent years was reviewed.

綜述了近幾年聚硅氧烷核殼粒子的研究進展。

The effect of core - shell modifier having rubber core and rigid plastic shell on toughen of engineering plastics was discussed.

討論了具有橡膠核-硬塑料殼的核殼型沖擊改性劑對工程塑料的增韌作用。

A new gravimetric method for determining Cu and Sn in the core-shell Cu-Sn bimetallic nanoparticle was proposed.

探討了測定核殼式納米銅-錫雙金屬粉的各組分含量的重量分析法。

The magnetic nano-composite particle has a typical core-shell structure.

磁性納米復合粒子具有典型的核殼結構。

A kind of impact modifier ACR with core - shell structure was synthesized by emulsion polymerization.

采用種子乳液聚合手段，合成了具有核殼結構的抗沖擊改性劑ACR。

But, nanoarrays made by core-shell particles were nanotubes with bad structure.

而以核殼粒子所制備的則是結構松散的奈米管。

As to Cu_2O, the core-shell structure is seldom reported.

對于氧化亞銅微納米粉體而言，這種同質核殼結構很少有人報道。

Synthesis and Characterization of Core-Shell Particles Bearing Sulfuric Acid Groups on the Surface

表面含磺酸基的核-殼型乳膠粒子的制備與表征

Preparation of core-shell composite particles with an acrylate polyurethane core and its toughening effects for epoxy resins

以丙烯酸酯化聚氨酯為核的核殼粒子的制備及其對環氧樹脂的增韌作用

Study of Core-shell Structure Acrylate Emulsion Prepared by Gradual Emulsion Polymerization: Synthesis Technology

梯度乳液聚合制備核殼結構丙烯酸酯乳液——合成工藝

Synthetical methods of the core-shell structure polymer and its anti-sticking applications in the sensitive material

核-殼結構聚合物的制備方法及其在感光材料中防粘連

Preparation and characterization of waterborne polyurethane and its core-shell hybrid emulsions

水性聚氨酯及其核殼型復合乳液的制備與表征

Synthesis of Fluorine-Containing Core-Shell Structure Waterborne Polyurethane Dispersion Nano-Structure Material

含氟水分散性聚氨酯核殼納米材料的合成研究

Adjustment of Responsive Temperature and Loading Behavior of Temperature-sensitive Core-shell Micelles Prepared via in-situ Polymerization

原位聚合法制備溫敏性聚合物核殼膠束的響應溫度調控及其負載行為

Preparation of core-shell emulsion and its application in improving stain resistance of exterior latex paint

核殼乳液的制備及其在耐沾污外墻涂料中的應用

Preparation of Organosiloxane Modified Core-shell Polyacrylate Latex and Its Sandstone Consolidation Effect in Oilfield

有機硅核-殼型聚丙烯酸酯乳液的合成及油田固砂性能研究

Thermal Property and Preparation of Polyethylene Di-stearate and Its Storage Power Core-shell Material

聚乙二醇雙硬脂酸酯及其貯能核殼結構的制備及熱性能

Study of Toughening Polypropylene by Core-Shell Structure Copolymer

核-殼結構共聚物增韌聚丙烯的研究

Preparation of nanoparticles styrene-butadiene latex with core-shell structure by ultrasonic emulsification

超聲波乳化法制備核殼型納米丁苯膠乳

Particle Size and Its Distribution of Acrylate Reactive Microgel Latex with Core-Shell Structure

核殼型丙烯酸酯類反應性微凝膠膠粒的粒徑及分布

Cooperative Sensitization of AgBr Core-Shell Emulsions by Internal Reduction and Surface Chemical Sensitization

AgBr核殼乳劑的顆粒內部還原增感與表面化學增感的協同增感效應

Synthesis and Adsorption Studies of Silica-Carried Core-Shell Polyethyleneimine Resins with Pendent Mercapto Group

核-殼型巰基胺螯合樹脂的制備及其吸附性能