edm
美 
英
- n.法；電子測距
- 網絡電子郵件營銷；電火花加工(electrical discharge machining)；火花機(Electric Discharge Machines)
英漢解釋
例句
EDM is often used as a reference model for information integration or as a basis for persistent databases and data warehousing.
EDM通常用作信息集成的參考模型，或者用作持久性數據庫和數據倉庫的基礎。
During the machining, graphitization of the surface of CVD diamonds film enables EDM process to continue.
加工中金剛石表面的石墨化使電蝕加工得以不斷延續。
A new technology used for polishing CVD diamond films by EDM method is put forward and its removal mechanism is dealt with.
提出了一種用電火花加工法拋光CVD金剛石膜的新工藝，并對其加工去除機理進行了初步探討。
Capable of operating milling machines, surface grinders, lathes, CNC equipment, measuring equipment as well as wire and sinker EDM's.
可以操作銑床，磨床，加工中心，測量工具及線割放電加工機，
It is one of the main processes in EDM to mix machining liquid with silicon, aluminum and nickel powder particles.
為實現鏡面電火花加工，向工作液中加入硅、鋁或鎳等粉末微粒。
The dressing experiments'results account for that EDM can be used on dressing non-electrical grinding wheel.
實驗結果表明：樹脂結合劑金剛石砂輪表面經涂覆導電材料后可以進行放電修整；
This paper summaries EDM surface strengthening technology and its numerical simulation development and achievements.
本文首先綜述了電火花表面強化技術及其數值模擬研究的進展及成果；
The EDM process is valued for its ability to machine complex shapes in metals of any hardness.
電火花加工的可貴之處在于它可在任何硬度金屬上加工復雜形狀。
The EDM's past failure was largely caused by an ambitious plan to force applications and databases to conform to one data model.
由于計劃過于雄心勃勃，強制應用和數據庫僅遵從一個數據模型，這在過去造成了很多EDM失敗。
Machining accuracy of slow-feeding EDM wire-cut is one of major targets scaling processing properties.
慢走絲電火花線切割加工精度是衡量加工性能的重要指標之一。
It is an effectual way to improve the figure and the surface quality of diamond grinding wheel using EDM.
電火花加工技術是金剛石砂輪整形和改善表面質量的有效方法。
In this work, the surface microcracks machined by powder-mixed EDM were researched.
對混粉電火花加工表面的顯微裂紋進行了研究。
A comprehensive study of efficiency for machining carbide with different electrode material in EDM is presented in this paper.
通過實驗的方式對采用不同電極電火花加工技術加工硬質合金的效率進行了研究。
Through evaluating the machining characteristics, the transistor type impulse generator has been proved to be suitable for micro-EDM.
實驗結果表明，自振式晶體管脈沖電源因其加工速度慢并不適于微細放電加工。
The micro-energy pulse generator is one of the key components of the micro-EDM machine tool.
微能脈沖電源是微細電火花加工機床上的重要組成部分。
As an important method for manufacturing precise and micro products, micro-EDM greatly attracts academia and industry concerns.
微細電火花加工是精微產品加工的一個重要方法，其加工技術倍受學術界和工業界的關注。
Be able to skillfully operate variety of EDM machines, and have a deep understanding of the electrical discharge machining parameters.
能熟練操作各種放電加工機床，并對放電加工參數有深入了解。
Low duty ratio should be chosen to ensure the least effect of EDM quenching on wheel which then to get the hardened layer.
為保證砂輪基體受電火花淬火影響最小，形成硬質層最薄，電火花精修形時需選用較小的占空比。
The forming mechanism of different micro structures fabricated by micro electrical discharge machining (EDM) deposition was studied.
對微細電火花沉積加工中沉積所得不同微細結構的成形機理進行了研究。
The simulation of micro-EDM surface roughness is performed through building relationship between discharge crater and surface roughness.
通過建立放電凹坑與表面粗糙度的關系，實現了對微細電火花加工表面粗糙度的仿真。
For the micro-EDM with independent pulse generator, surface roughness will decrease with the reduction of peak current and pulse time.
對于使用獨立式脈沖電源的微細電火花加工，表面粗糙度隨著峰值電流和脈寬的減小而降低；
Be able to deal with variety problem that happened in the EDM work.
能及時處理放電加工工作中發生的各種問題。
The results show that the energy of single pulse discharge is the main factor affecting micro-EDM surface roughness.
結果表明，單脈沖放電能量是影響微細電火花加工表面粗糙度的主要因素。
The Entity Data Model (EDM) is a set of concepts that describe the structure of data, regardless of its stored form.
實體資料模型（EDM）是描述資料結構的概念集，不論其預存形式為何。
The Emergency Door Module (EDM) allows the engine to be started only when the emergency exit door is closed and unlocked.
緊急出口警報器（EDM）只有在緊急出口門已關閉和上鎖時才允許啟動發動機。
Surface hardness will not be increased after the EDM process which simplifies the following machining procedures.
在進行放電（電火花）加工后，表面硬度不會增高，可簡化其后的加工工序。
A method for controlling an inverting EDM pulse generator was introduced and illustrated the designing way and controlling principle.
提出了電火花加工脈沖電源逆變式結構的一種控制策略，闡明了其實現方法和控制原理。
Ultrasonic vibration assisted EDM was proposed and its principle was introduced in this paper.
提出了超聲振動輔助氣體介質電火花加工技術并簡述了其加工原理。
Research can supply specific processing reference to machining other difficult processing materials with EDM.
研究可以為其它難加工材料的電火花加工提供具體工藝參考及理論指導。
EDM(Electro Discharge Machining) is one kind of special processing method, and it is widely used in mechanical area.
電火花加工屬于一種特殊的加工方式，在機械加工領域中逐漸得到了廣泛的應用。
Shareware program to generate CNC programs to cut tooling for a ram style EDM for making gears.
共享程序生成數控加工程序，以減少對內存式電火花加工制造齒輪。
The research lays a theoretical and technological foundation for the EDM to realize green manufacturing.
本研究為電火花成形加工實現制造綠色化奠定了一定的理論與技術基礎。
Applicable to cutting knife wheel, glass of blade is specially the mirror processing edm, cutting line especially beautiful.
適用于厚玻璃板切割，刀輪的刀刃是經過特殊電火花進行的鏡面加工的，所以切割的線條特別漂亮。
Also it gives practical calculation formulas of the EDM trigonometric leveling of leveling type.
給出了水準式光電測距三角高程測量的實用計算公式。
EDM for quenching after the deep cavity of small-scale processing is still valid.
電火花加工對于淬火后的深、小型腔的加工仍是有效的方案。
Tool electrode ultrasonic vibration aided gas medium EDM technology was proposed and correspondingexperiment system was designed.
提出了工具電極超聲振動輔助氣體介質電火花加工方法。
The EDM works in conjunction with electronics already in the vehicle and utilizes OEM connectors to simplify installation.
EDM與車內的其他電子儀器聯合使用，使用OEM插頭進行簡單的安裝。
The common tyre-mould EDM is reconstructed by applying NC technology and the hardware circuit and the software structure are researched.
對普通輪胎模電火花機床進行數控改造，研究了其硬件電路、軟件構成。
An Electrical Discharge Machining(EDM) machine for steel pipe's sample grooves was designed to satisfy for being carried in hand.
為滿足設備小型化、便于攜帶的要求，設計了鋼管電火花刻槽機。
It is analyzed that atmospheric refraction in EDM triangulated height surveying for construction of high building is a key to precision.
提出并分析了EDM三角高程測量進行高聳建筑物高程放樣時，大氣折光是影響精度的關鍵因素。
