milling

美 ['m?l??] 　英 ['m?l??]

• n.磨；制粉；碾碎；【礦】選礦
• adj.成群亂轉的
• v.“mill”的現在分詞
• 網絡銑削；研磨；混煉

詞形變化

英漢雙解

英漢解釋

英英解釋

例句

A fixture is usually bolted to the machine table of a milling or boring machine; with a jig, this is often unnecessary.

工作夾具通常由螺栓固定在銑床或鏜床的工作臺上，而一般夾具則不需要用螺栓固定。

Michael Mann was there and just milling around in the lobby afterwards so my DH told him how much we enjoyed the film.

麥克爾曼在那里，在大廳踱著碎步，然后我的DH跟他說我們有多么喜歡這部電影。

If it is possible, be responsible for maintenance of the CNC milling machine and stretch bending machine.

如果可能，負責CNC數控銑床和拉伸折彎機的設備維護保養。

The integral-type milling cutter is mainly used for fine machining of a leaf-root profile and rough machining of a small leaf-root profile.

整體式銑刀刀具主要用于葉根型線的精加工及小葉根型線的粗加工。

I decided the best way was to cut out the logo on a milling machine. then mill a replacement piece out of another lid.

最后，我認為最好的辦法是通過機床將商標削去，然后用另一塊外殼的材料研磨修補。

This type is generally used for milling deep slots, since the staggering of teeth provides for greater chip space.

因為搖擺牙提供更加巨大的芯片空間，這個類型為碾碎深槽孔通常使用。

In high-speed milling, the geometrical factors of both feed rate and pick feed influence the surface roughness and machining efficiency.

高速銑削時，進給量和進給間隔不僅是影響加工表面粗糙度的重要幾何因素，同時也是影響切削效率的重要因素。

He had looked at the milling sheep with a sour expression, said, "Some a these never went up there with you. "

不過他看過那些滿地亂轉的羊后，面露不悅：“這里頭有些羊可沒跟你們上山。”

Used for milling processing of the profile bending parts of aluminum curtain wall.

適用于鋁塑幕墻型材，實現型材折彎處的銑槽加工；

The company has CNC, folding beds, cutting beds, milling machines, presses, lathes , Saw, argon welder and a series of sound equipment.

公司擁有CNC、折床、剪床、銑床、沖床、車床、鋸床、氬焊機等一系列完善的設備。

Different specifications of the keyway is made up of different cemented carbide milling tool specifications out of a one-time processing.

不同規格的鍵槽是由不同規格的硬質合金銑刀具一次性加工出來的。

Junior high school or above, with two years of milling experience, proficiency, will be in map.

初中以上文化，有兩年的銑工工作經驗，熟練操作，會識圖。

Each of the cutting edges of a milling cutter acts as an individual single-point cutter when it engages with the workpiece metal.

在銑刀切削工件金屬時，銑刀的每條切削刃都象一單獨的單刃刀具一樣作用。

The book block milling back edge finish depends on the size of the angle in and out of frezer.

書芯銑背的邊緣光潔度取決于銑刀進出角度的大小。

In this case, the amount of milling back, please! --the thunder from the out-of-mouth parts of the book set.

在此情況下，銑背量多了，就必然劃破外帖書芯訂口部位。

The method has no consumption of a milling tool, so as to lower management and maintenance cost.

沒有了銑刀刀具的消耗，減低了管理和維護成本。

The spindle, to which the milling cutter is attached, may be horizontal (for slab milling), or vertical (for face milling).

紡錘，銑刀附上，也許是水平（為碾碎的平板），或者垂直（為端銑）。

The root of the quality, not lack of milling back, and are made of plastic difference not glued milling and broken pages.

究其質量原因，并非銑背不足所致，而是膠質差沒有粘牢銑斷的書頁。

The versatility of the milling machine is contributed to a great extent by the variety of milling cutters that are available.

銑床的通用性由是可利用的銑刀的品種到大規模范圍貢獻。

Mixture through the ball milling method to make it uniform dispersion.

通過球磨混料法來解決各相的分散性問題。

So many different ideas are milling about in my head, but I can't settle down to work on any one of them.

我腦中浮現出很多不同的想法，但我卻不能確定其中任何一個來付諸行動。

There was a crowd of people milling about in the streets.

有一大群人在街上轉來轉去。

With the popularity of CNC machine tools, production enterprises with the general CNC milling machine tool gear tooth economically feasible.

隨著數控機床的普及，一般的生產企業用數控銑齒機床加工齒輪經濟可行。

The research topics are the main contents of a CNC milling machine teeth of the electrical control system design.

本課題研究的主要內容是進行數控銑齒機床的電氣控制系統的設計。

The result showed that the milling process simulation was an effective method to predict the machining distortion correctly.

研究表明，數值模擬方法是研究航空整體結構零件銑削加工變形的有效方法，可正確預測零件的加工變形。

Milling workers, many of whom had jobs elsewhere but were on the lookout for an upgrade, queued up for tours of each factory's facilities.

大批工人排隊參觀每家工廠的設施，其中許多在其它地方有工作，但仍關注著改善條件的機會。

Helical rotor is usually machined by shaped tools or equipped gears in common milling machine.

螺旋轉子的加工一般是在普通銑床上采用成形刀及配掛齒輪的方法加工而成。

Heinicke is a German company and world market leader for drilling and milling machines for the wind power branch.

海尼肯是一家德國公司，它在風力打孔和研磨方面一直是國際市場中的領導者！

The Royal Palace shut briefly but four days later it was business as usual, with Norwegians and tourists milling around the forecourt.

皇宮建筑短暫關閉，但四天后就恢復營業，前院里盡是挪威人和游客在打轉。

His wife Tien held, through the Bogasari flour mills, the state monopoly on the import and milling of wheat.

他的妻子Tien通過Bogasari磨粉廠控制了小麥進口和磨粉的壟斷權。

It was pointed out that high speed milling is a trend of modern mold manufacturing, and can be widely used in mold process.

指出高速銑削技術是現代模具制造的發展方向之一，且高速銑削在模具制造中有廣闊的應用和發展前景。

In the Heat & Power Plant of YPC, the single milling coal consumption of boiler increased gradually due to the change of coal-fuel variety.

因煤種變化等原因，揚子熱電廠鍋爐的磨煤單耗逐漸上升。

Gang milling In gang milling a number of milling cutters are fastened to the arbor to suit the profile of the workpiece to be machined.

在磨碎一些磨碎的刀具的幫伙中磨碎的幫伙被固定到軸以便適于工作件的概況是機器。

A scheme to transform a milling planer into a production miller for machining the cylinder cover of diesel engine is proposed in this paper.

介紹了將原有龍門銑床改造成加工柴油機汽缸蓋的專用銑床的設計方案。

The gear milling positioning fixture is particularly suitable to be matched with the fixture of the mandrel positioning structure.

本發明特別適合芯軸定位結構的夾具配套使用。

Up milling (conventional milling). In up milling the workpiece is fed against the direction of cutter rotation, as shown in Fig. 12. 3a.

逆銑（傳統銑削）：在逆銑中，工件逆著銑刀轉動的方向進給，如圖12.3a所示。

Capable of operating milling machines, surface grinders, lathes, CNC equipment, measuring equipment as well as wire and sinker EDM's.

可以操作銑床，磨床，加工中心，測量工具及線割放電加工機，

binding package on my computer for milling back, slotted-bed down to make it to the back of the book.

將膠訂包本機上的銑背、開槽臺下降，使其接觸不到書背。

The software controls a linear scan noncontact laser imager for facial topography acquisition and a milling machine for pattern fabrication.

該軟件可控制的線性掃描非接觸式激光成像儀用于面部地形購置和銑床的格局捏造。

But it was chaos -- so many journalists, photographers, onlookers milling around outside what, back then, was a really small hospital.

但是那人潮洶涌--很多的記者、攝影師和旁觀者在醫院外面圍著，當時這家醫院還是家小醫院。

If milling back and dehairing deep enough, will definitely affect the infiltration of rubber, resulting in off the page, the leaflet.

若銑背和打毛的深度不夠，必然影響膠的滲透，從而造成脫頁、散頁的質量缺陷。

Finally, experiment of plasma deposition and milling manufacture are carried out on CNC machine controlled by Open CNC system software.

最后運用開發的開放式數控系統軟件在復合機床上進行了等離子熔積和銑削加工實驗。