thermomechanical
美 
英
- adj.形變熱；有可能進行許多不同的形變熱處理
- 網絡熱機械的；熱機械上；熱機械性
英漢解釋
例句
In modelling terms, a coupled thermomechanical analysis represents a generalization of the computational mechanics of fracture and damage.
在模擬計算，耦合熱分析是一個泛化的計算力學的斷裂和損傷。
One of the key problems for thermomechanical treatment of aluminum alloy is how to determine the process parameters.
如何正確地選擇和控制工藝方案及其參數，是影響鋁合金形變熱處理效果的一個關鍵因素。
The difference of thermomechanical coupling effect is the cause to result in IR feature difference between rock and PMMA.
兩種材料熱力耦合機制不同是導致受力紅外輻射特征差異的根本原因。
Thermomechanical pulp (TMP): Superior, stronger mechanical pulp produced from steam-heated wood chips.
熱法磨木漿：用蒸汽熱化木片造成的高級，質地較強的機械漿。
By combining with process test, some thinking s about thermomechanical treatment of steel wire on the production line are put forward.
結合工藝試驗，提出了在該生產線上對鋼絲形變熱處理的一些設想。
To describe the solidification in caster mold, a twodimensional fully thermomechanical coupled finite element model was established.
針對鋼在板坯連鑄結晶器內的凝固過程，建立二維完全熱力耦合有限元分析模型。
PLASTICS. VOCABULARY APPLICABLE TO MECHANICAL AND THERMOMECHANICAL TESTS AND TO THEIR INTERPRETATION.
塑料.機械和熱機試驗及其描述用詞匯
The results show that thermomechanical treatment is the effective method to increase the strength and plasticity of 7A04 aluminum alloy.
結果表明：形變熱處理是使7A04鋁合金的塑性和強度同時提高的有效途徑。
A thermomechanical model for oblique cutting was proposed.
提出了斜角切削熱力模型。
Vitreous and porcelain enamels - Determination of thermomechanical properties by means of a rapid test method
玻璃質釉和瓷釉。通過快速試驗法對熱機械性能的測定
Standard Test Method for Assignment of a Glass Transition Temperature Using Thermomechanical Analysis Under Tension
拉力下熱機械分析的玻璃轉變溫度分配的標準試驗方法
Factors Influencing Flocculation of Dissolved and Colloidal Substances in a Thermomechanical Pulp Water
濾液中溶解和膠體物絮聚的影響因素
Structure Evolution of a Nb-Microalloyed Extra-Low Carbon Steel during Simulated Thermomechanical Control Process
模擬控軋控冷過程含Nb超低碳鋼的組織演變
Modelling of microstructural evolution of aluminium alloy during thermomechanical processing
鋁合金熱變形組織演化的模擬
Determination of glass transition temperature of plastics--Thermomechanical analysis
塑料玻璃化溫度測定方法熱機械分析法
Standard Test Method for Assignment of the Glass Transition Temperature by Thermomechanical Analysis
使用熱機分析測定玻璃轉變溫度的標準試驗方法
Bi-Material Microcantilever's Thermomechanical Performance and Materials Selection: An Analysis
雙金屬微懸臂梁的選材及熱機械性能分析
Hot-rolled products in weldable fine grain structural steels - Delivery conditions for thermomechanical rolled steels
可焊接細品粒結構鋼的熱軋制品.熱軋鋼的交貨條件
Standard Test Method for Indentation Softening Temperature by Thermomechanical Analysis
熱力學分析壓痕軟化溫度的測試方法
Study on the Process Parameters of Thermomechanical Treatment of Aluminum Alloy and Its Controlling
鋁合金形變熱處理工藝參數及其控制
Thermomechanical Treatment for the Automobile Steering Knuckle
汽車轉向節形變熱處理
Standard Practice for Strain Controlled Thermomechanical Fatigue Testing
張力受控的熱機械疲勞測試慣例
Testing method for linear thermal expansion coefficient of plastics by thermomechanical analysis
塑料線膨脹系數試驗方法
Microstructure and Properties in Heavy Die Standard Piece After Thermomechanical Heat Treatment
大型模具標準件形變熱處理后的組織和性能
Effects of thermomechanical heat treatment processing on microstructures and properties of Cu-Zn alloy by minor Cr alloying
形變熱處理對用微量Cr合金化的Cu-Zn合金組織性能的影響
Optimum Design of Masson's Pine Thermomechanical Pulp Reinforced Polypropylene Composite
馬尾松熱磨機械漿增強聚丙烯復合材料優化設計
Test Method for Temperature Calibration of Thermomechanical Analyzers
熱機械分析儀溫度校準的測試方法
An Analysis of Microcantilever's Thermomechanical Performance and Selection of Material
微懸臂梁的熱機械性能分析及選材
Thermomechanical Behavior of SMA Long Fibers Reinforced Aluminum Matrix Composite
SMA長纖維鋁基復合材料的熱力學性能
Wood Influence on Thermomechanical Pulp Quality: Fibre Separation and Fibre Breakage
材種對熱磨機械漿質量的影響：纖維分離與裂斷
Properties and processing of thermomechanical treatment Cu-Cr-Zr alloy by artificial neural network
基于人工神經網絡的銅合金形變熱處理工藝和性能
Thermomechanical Reliability Simulations of IC - MEMS Devices. pdf
集成電路與MEMS器件的熱機械可靠性仿真
Test Method for Linear Thermal Expansion of Solid Materials by Thermomechanical Analysis
用熱力分析法測試實芯材料線性熱膨的試驗方法
Research and Progress of Thermomechanical Treatment of Aluminium Alloy
鋁合金形變熱處理工藝研究進展
The Effect of High Temperature Thermomechanical Cycle Treatment on the Microstructural Refinement of TiNi Alloy
高溫形變循環熱處理對TiNi合金組織細化的影響
Study on Wood Thermomechanical Pulp Reinforced Nylon Composite
木片熱磨機械漿增強尼龍復合材料
Thermomechanical Properties of Helical Spring of Cu-based Shape Memory Alloys
Cu基形狀記憶合金螺旋彈簧熱機性能研究
Effect of Thermomechanical Treatment on Properties of 2519 Aluminum Alloy
形變熱處理對2519鋁合金性能的影響
Effect of Thermomechanical Control Process on Structure of Nb-Ti Microalloy Steel for Automobile
控軋控冷對含Nb-Ti微合金汽車用鋼組織的影響
On-line Thermomechanical Treatment Process for N-80 Grade Oil Casing
N80級石油套管在線形變熱處理工藝
