Vickers-hardness

Vickers-hardness

美 　英

• 網絡維氏硬度；硬度可達維氏

例句

The vickers hardness and nitriding surface fulfill requirements, and also improves the machining quality of the products.

主軸錐孔的維氏硬度和氮層深度均達到要求，提高了產品的加工質量。

With W content increasing, the elastic module, flexural strength and fracture toughness increase, but the Vickers'hardness decreases.

隨W含量的增加，復合材料彈性模量、抗彎強度和斷裂韌性增大，而硬度減小。

Welding simulation also showed that the vickers-hardness decrease with heat input increasing.

另外，隨著熱輸入的增大，兩種鋼粗晶區的硬度均不斷降低。

QUARRY PRODUCTS. LIMESTONES. MEASUREMENT OF VICKERS HARDNESS.

采石場產品.石灰石.維氏硬度的測量

Vickers hardness testing of resistance spot, projection and seam welds (low load and microhardness).

電阻點焊、凸焊和滾焊的維氏硬度試驗（低荷載和超微硬度）

In addition, some properties of the pure Ti2AlC samples (density, Vickers hardness, and electrical conductivity) were measured respectively.

同時還測試了所合成高純Ti2AlC試樣的部分物理性能，包括密度、維氏顯微硬度和電導率。

ZINC AND ZINC ALLOYS. METHOD FOR THE VICKERS HARDNESS TESTING ON FOILS AND COILS.

鋅和鋅合金.鑄制品與軋制品的硬度試驗

Metallic materials. Vickers hardness test. Part 2 : verification of testing machines.

金屬材料.維氏硬度試驗.第2部分：試驗機械的校準

Metallic materials. Vickers hardness test. Part 3 : calibration of reference blocks.

金屬材料.維氏硬度試驗.第3部分：標準塊的校準

Metallic materials. Vickers hardness test. Part 1 : test method.

金屬材料.維氏硬度試驗.第1部分：試驗方法

The results show that: the strengthening phases precipitates fewer and the vickers hardness decreases with cooling speed increasing;

結果表明：冷卻速度越快，各種強化相析出的越少且小，硬度越低；

Metallic materials - Vickers hardness test - Verification of testing machines

金屬材料.維式硬度試驗.試驗機器的驗證

Metallic materials - Vickers hardness test - Part 3: Calibration of the reference blocks; example of performance of the reference blocks

金屬材料.維氏硬度檢驗.第3部分：硬度對比板的校準.使用硬度對比板舉例

Metallic materials - Vickers hardness test - Calibration of reference blocks

金屬材料.維式硬度試驗.參考阻滯的校正

The change low of the Vickers Hardness keep consistent with the change low of compressive strength;

硬度的變化規律與抗壓強度的變化規律保持一致；

A New Method for Quickly and Automatically Analysis of the Image of Vickers Hardness Using Wavelet Theory

基于小波的維氏硬度圖快速自動分析新方法

Unification of Hardness Scale Connected with Digitization of Vickers Hardness Test

硬度標度的統一與維氏硬度試驗的數字化

test values can be converted to magnitude, Brinell, Rockwell, Vickers hardness;

可將測試值轉化為里氏、布氏、洛氏、維氏硬度值；

Vickers Hardness Measurement by Using Digital Image Wavelet Multi-resolution Analysis

應用數字圖像小波多分辨率理論測試維氏硬度

Digitalization principle of Vickers hardness tester

維氏硬度計數字化原理

Vickers hardness test -- Verification of testing machines

維氏硬度試驗試驗機的驗證

Knoop hardness and its conversion to Vickers hardness

努氏硬度及其與維氏硬度的換算

Evaluation of Measurement Uncertainty in Vickers Hardness Test

金屬維氏硬度試驗測量不確定度的評定

verification regulation of metal vickers hardness tester

金屬維氏硬度計檢定規程

Metallic materials - Vickers hardness test - Test method

金屬材料.維式硬度試驗.試驗方法

Test methods for vickers hardness at elevated temperatures

高溫維氏硬度測試方法

Linear Relationship between Vickers-hardness and Strength of 6063 Aluminium Alloy Profile

6063鋁合金型材維氏硬度與強度的線性關系

Test method for Vickers hardness of high performance ceramics

工程陶瓷維氏硬度試驗方法

Metallic vickers hardness test--Part 3: Calibration of hardness reference blocks

金屬維氏硬度試驗第3部分：標準硬度塊的標定

metallic materials - vickers hardness test - part 4 : tables of hardness values

金屬材料.維氏硬度試驗.第4部分：硬度值表

Test Method for Vickers Hardness of Metallic Materials

金屬材料維氏硬度的測試方法