bainitic
美 
英
例句
The dimension and dispersion of the precipitation decrease, the lath character of bainitic ferrite tends to be evident.
碳化物尺寸變小，彌散度減小，貝氏體鐵素體條片狀特征明顯；
The microstructure of weld bead obtained by shielded metal arc welding are massive ferrite and a little pearlite, HAZ are lath bainitic.
手工電弧焊焊縫組織主要為塊狀鐵素體和少量珠光體，熱影響區組織為板條狀貝氏體組織；
A boron-treated ultra low carbon bainitic steel was investigated by means of particle track autoradiography (PTA) technique.
用硼的徑跡顯微照相技術（PTA）研究了含硼超低碳貝氏體鋼的熱變形再結晶過程。
The results showed that the changes of mechanical properties of the samples are in accord with the changes of upper bainitic microstructure.
試樣力學性能的變化與上貝氏體組織形態的變化相一致。
The structures and properties of bainitic steels with various carbon contents have been studied.
研究了不同含碳量貝氏體鋼的組織與性能。
Carburization characteristics and wear behavior of new type meta bainitic steel were studied.
研究了新型準貝氏體鋼滲碳特性及滲層磨損性能。
In this paper, notch sensitivity of a low-carbon bainitic steel under static load has been studied.
本文研究了回火溫度對低碳貝氏體鋼靜載缺口敏感性的影響。
The effect of different cooling rate on microstructure and mechanical properties of new type bainitic steel were studied.
研究了不同冷卻速度對新型貝氏體鋼力學性能及組織的影響。
Effect of silicon on microstructure and properties of meta-bainitic carburizing steel were studied.
研究了硅對準貝氏體滲碳鋼滲碳組織與性能的影響。
The impact abrasive properties of as-cast bainitic low-carbon ductile iron were investigated.
研究經準鑄態貝氏體工藝處理低碳球墨鑄鐵沖擊磨料磨損特性。
A new series of meta bainitic steels is founded by adding in appropriate amount of silicon on the alloying basis of bainitic steel.
準貝氏體鋼是在貝氏體鋼合金化的基礎上添加適量的硅而組成的。
This steel is normally given a martensitic or bainitic heat treatment during which it is hardened to the range of 58 to 65 HRC.
這種鋼材通常經過馬氏體或貝氏體熱處理，在此過程中被淬硬到58至65HRC的范圍。
Structure and Mechanics Property of Welding Joints of a Special Welding Electrode for the Frog Made of Bainitic Steel
貝氏體鋼轍叉專用焊條接頭組織和力學性能
Formation and Wear Resistance of a New Cast Bainitic Steel Used in Manufacturing the Harrow Disk
農機耙片用新型鑄態貝氏體鋼的組織與耐磨性
Effect of the Original Microstructure on the Structure and Mechanical Properties of Austenitic-bainitic Malleable Iron by Austempering
奧-貝可鍛鑄鐵原始組織對等溫淬火組織及性能的影響
Influence of controlled rolling and controlled cooling technology on microstructure and performance of low-carbon bainitic steel
控軋控冷工藝對低碳貝氏體鋼組織性能的影響
Influence of Austempering Processing on Microstructure and Mechanical Property of Austenitic-bainitic Cast Steel
等溫淬火工藝對奧-貝鑄鋼組織和性能的影響
Mechanical Properties with Different Processing Techniques during Tempering in Ultra-Low Carbon Bainitic Steel Plates
不同工藝下超低碳貝氏體鋼板回火過程中的力學性能
Effect of Heat Treatment on the Manual Are Welding Joint Microstructure and Properties of Wear-Resisting Plate of New Type Bainitic Steel
熱處理對新型貝氏體耐磨鋼板手工焊焊接接頭組織與性能的影響
Study of Wear Resistance of a New As-Cast Bainitic Steel
新型鑄態貝氏體鋼的抗磨損性能研究
The Effect of the Silicon Content and Heat Treatment Parameters on the Structures and Properties of Low- alloying Austenitic- bainitic Steel
硅及熱處理參數對低合金奧-貝鋼組織與性能的影響
Mechanical properties of friction welding joint of non-quenching and tempering bainitic steel for super-strength sucker rods
超高強度抽油桿用非調質貝氏體鋼摩擦焊接頭的力學性能
To Improve the Properties of Quasi - bainitic Wear Resistant Plate by Means of TMCP Process
通過TMCP工藝改善準貝氏體耐磨鋼板性能
Effect of Chemical CompoSition on the Microstructure and Mechanical Properties of Austenitic-Bainitic Cast Steel
化學成分對奧氏體-貝氏體鑄鋼組織與性能的影響
Study of RE-Ti Multi-modification on Grain Refinement of Bainitic Cast Steel
稀土、鈦復合變質劑對貝氏體鋼鑄態晶粒細化的研究
Determination of CCT Curves and Characteristics of Microstructure of Testing Bainitic Rail Steels
試驗用貝氏體鋼軌鋼連續冷卻曲線的測定及組織特征
Influence of the Deformation System of Finish Rolling on the Microstructure and Property of Low-carbon Bainitic Steel
精軋變形制度對低碳貝氏體鋼組織與性能的影響
Discussion of Important Questions on Applications and Manufacture of Bainitic Ductile Iron
貝氏體球鐵生產應用中若干問題的探討
Properties of a New Type Bainitic Steel for Automobile Leaf Spring
新型貝氏體鋼汽車板簧材料的性能研究
Effect of Hot Rolling Schedules on the Transformation Behavior and Microstructure in Mn-Mo-Nb-B Ultralow Carbon Bainitic Steel
熱變形工藝參數對超低碳貝氏體鋼轉變行為和顯微結構的影響
Dynamic recrystallization of hot deformed austenite for microalloyed bainitic engineering steel
貝氏體非調質鋼熱變形奧氏體的動態再結晶行為
Investigation and Application of Air-Hardening Bainitic Cast Steel Free from Molybdenum and Nickel
無鉬鎳空淬貝氏體鑄鋼的研究與應用
Rigidity Trend Prediction for Bainitic Steels with Grey Gradient Optimization Model
貝氏體鋼形變時硬度趨勢預測的灰色坡度優化模型
Study of the platelike bainitic ferrite growth kinetics
片層狀貝氏體鐵素體長大動力學研究
Effects of SH modification agent on the microstructures and properties of air cooling bainitic cast steel
復合變質對空冷貝氏體鑄鋼組織和性能的影響
Development of New Weathering Steels of Extremely-low Carbon Bainitic Type with Excellent Weldability
焊接性優良的超低碳貝氏體新耐候鋼的開發
Effect of Tempering on Stability of Microstructure and Mechanical Properties of Low Carbon Bainitic Steel
回火對低碳貝氏體鋼組織穩定性及力學性能的影響
Low-carbon Bainitic Steel Carburizing and Its Application in Car Gear
低碳貝氏體鋼滲碳工藝及在轎車齒輪上的應用
Spinodal-Like Decomposition During the Incubation and Early Stage of Bainitic Transformation in Some Alloys
貝氏體轉變孕育期及初期的類調幅分解
In this paper, the effect factors that affect the stability of retained austenite in austenitic-Bainitic Ductile Iron were studied;
本文著重研究了奧—貝球鐵殘余奧氏體的穩定性及其影響因素；
