crashworthiness
美 [k'ræ?w?rð?n?s] 
英 [k'ræ?w?:ð?n?s]
- n.撞力承受度；防撞度
- 網絡耐撞性；耐碰撞性；耐毀損性
英漢解釋
例句
And a set of CAE analysis process is summarized for car lateral crashworthiness analysis and its validation.
總結形成一套適合于轎車側向耐撞性分析與設計驗證的CAE技術流程。
The helicopter flexible fuel cell construction was set as the research object, and its crashworthiness is simulating and validating.
以直升機結構試樣軟油箱為研究對象，對其抗墜毀性能進行了仿真分析與驗證。
Base on optimal design of the typical thin-walled rails, the crashworthiness of a sport utility vehicle's frame is improved.
以優化后的典型薄壁梁結構為基礎，對越野車車架進行了碰撞安全性優化設計。
A study on frontal crashworthiness of a commercial vehicle is carried out to improve the safety of commercial vehicles.
為了提高商用車安全性，對某型商用車正面碰撞安全性進行分析。
Therefore, the structural design of vehicle front rail crashworthiness in the frontal crash has a great engineering significance.
因此，前縱梁的結構耐撞性設計在汽車正面碰撞中具有十分重要的工程意義。
Crashworthiness is an important requirement in civil aircraft structural design.
耐撞性是民機機身結構設計的一項重要要求。
Then the crashworthiness performance of the different location of vehicle pole side impact was analysis.
其次分析了車輛側面不同碰撞區域的結構耐撞性能。
Look at the pictures of the incident it, in Europe and America in general crashworthiness of the car comparison.
看看事故的照片吧，一般的歐美的車比較耐撞。
This paper starts with summarizing the condition of study crashworthiness of vehicle with domestic and overseas.
本文對國內外汽車結構耐撞性研究現狀進行了總結分析；
Study on crashworthiness and attenuating energy absorbing structure.
整機抗墜毀緩沖吸能結構研究；
Thus, improve the crashworthiness of B-pillar has important significance to side crash safety of automobiles.
由此可見，提高B柱的抗撞性對增強整車側面碰撞安全性有重要意義。
The crashworthiness of truck bumper in a low velocity crash was discussed.
針對某重型載重汽車保險杠開展低速碰撞安全性研究。
The crashworthiness is a new technical need for light aircraft design.
適墜性是對輕型飛機設計提出的新要求。
this article introduced our country automobile side collision draft regulation uses automobile side crashworthiness assessment method.
本文介紹了我國汽車側面碰撞法規草案所采用的汽車側面碰撞安全性評價方法。
Study of Helicopter Crashworthiness Simulation Software Status Quo
直升機抗墜毀仿真軟件現狀研究
Crashworthiness Research and Improvement Design of a Passenger Bus Under Rolling-crash
大客車翻滾碰撞性能研究與改進設計
Application research of response surface methodology in thin-walled structural optimization design in crashworthiness
響應表面法在薄壁構件耐撞性優化設計中的應用研究
Numerical Simulation on Improvement of Material and Manufacture Technology Oriented to Vehicle Crashworthiness
面向汽車安全性的材料與制造工藝改進模擬試驗
Vehicle impact; Computer simulation; Crashworthiness;
汽車碰撞；計算機仿真；碰撞性能；
Simulation of automobile crashworthiness using clustered parallel computers
機群環境下汽車碰撞的并行模擬
National Regulation Oriented Crashworthiness Simulation of Vehicle Steering System
面向國家標準的汽車轉向機構安全性仿真
Finite element method; Vehicle frame; Passive safety; Structural crashworthiness;
有限元法；車架；被動安全性；緒構耐撞性；
Crashworthiness Performance Evaluation to Helicopter Landing Gear by Finite Element Simulation
直升機起落架抗墜毀性能的有限元仿真評估
Research on Structural Optimization of the Side Door Beam in SUV Based on Side Crashworthiness Simulation
基于側面碰撞仿真的轎車防撞桿結構優化研究
Parallel analysis of minibus crashworthiness improvements
并行計算在輕型客車耐撞性改進中的應用
Crashworthiness Simulation of Vehicle Steering Mechanism
汽車轉向機構碰撞安全性計算機仿真
Cylindrical Systems as Energy Absorbing Devices for Improving Rear Bumper Crashworthiness of Trucks
用筒系吸能結構改進橫梁的緩撞性能
The contact-impact algorithm for crashworthiness analysis of automobile structures
汽車結構耐撞性分析中的沖擊接觸算法
Simulation Research on Finite Deformation Crashworthiness of Railway Passenger Car
鐵道客車大變形碰撞仿真研究
Application of Optimization Method to Ship Structural Crashworthiness
船體結構耐撞性優化設計方法研究
The Crashworthiness Design Optimization of Thin-walled Component with Circular Tapered End
端部圓錐形薄壁構件的抗撞性設計優化
The Improvement of a Minibus'Structure Based on Computer Simulation of Crashworthiness
基于碰撞仿真對小客車的結構改進
Study of Truck Rear Bumper Crashworthiness
貨車尾部護欄緩撞性能的研究
Frontal crashworthiness of minibus with different collision modes
不同碰撞模式的汽車正面結構抗撞性設計
Structural Crashworthiness Optimization Based on Response Surface Methodology
基于響應面方法的結構耐撞性優化
Simulation Study on Structural Crashworthiness for Bumper System in Vehicle
汽車保險杠系統的結構耐撞性數值模擬研究
Car Bumper Structure Design for Improving Crashworthiness
轎車保險杠耐撞性結構設計的研究
Numeric Analysis of Crashworthiness of Aluminum Alloy Materials for High Speed Train
高速列車用鋁合金材料的耐撞性數值分析
Study on Crashworthiness of Honeycomb Sandwich Panel under Lateral Dynamic Load
蜂窩式夾層板耐撞性能研究
A Study on Crashworthiness of the Thin Walled Column by Computer Simulation
薄壁直梁件碰撞性能計算機仿真方法的研究
