electroless
美 
英
例句
Is SPC used for Desmear and Electroless process ? Is the corrective action taken for the out of control status?
去膠渣與化學沉銅制程是否使用SPC？超出管控要求時，是否采取相應的改善措施？
Electroless plating and salt bath plating were adopted on the surface modifications diamond.
采用化學鍍、鹽浴鍍對金剛石進行表面改性。
Satisfactory polishing surface cannot be obtained on stretched stainless steel parts by traditional electroless polishing process.
不銹鋼拉伸工件采用常規的化學拋光工藝不能達到理想的效果。
It is shown that optimized Ni-P alloy coatings can be obtained with electroless nickel plating on the surface of AZ91 magnesium alloys.
此外研究了化學鍍鎳時間及鎂合金基體鍍前熱處理工藝對AZ91鎂合金表面鍍層硬度及其與基體的結合力。
Electroless Ni P alloy coating has excellent performances due to its amorphous structure.
化學鍍鎳磷合金鍍層由于其非晶態結構而具有優異的性能。
The corrosion resistance of direct electroless nickel on die-cast aluminum case of the electronic connector is bad.
電連接器鋁外殼壓鑄件直接化學鍍鎳所得鍍層耐蝕性差。
Generalized electroless nickel plating technology involves pretreatment technology, nickel plating technology and after treatment.
廣義的化學鍍鎳工藝包括鍍前預處理工藝、鍍鎳工藝和后處理工藝。
Metallic coatings - Autocatalytic (electroless) nickel-phosphorus alloy coatings - Specification and test methods.
金屬覆層.自動催化（無電）的鎳磷合金覆層.規范和試驗方法
and a step in which the core powder having the noble metal deposited thereon is plated by electroless plating.
接著，對載持有該貴金屬的芯材粉體進行非電解電鍍處理的工序。
Regeneration of electroless Ni bath by electroosmosis was tentatively investigated through static electroosmosis experiment.
通過靜態電滲析實驗，初步研究了電滲析法對化學鍍鎳液的再生。
Its products include chemicals used in electrolytic nickel plating, electroless copper, electroless nickel and pretreatment.
產品包括電鎳、沉鎳、染黑、無氰電銅及前處理。
Electroless nickel plating on magnesium-lithium alloy was studied, and an appropriate pretreatment was determined.
對鎂鋰合金化學鍍鎳進行了研究，確定了合適的前處理工藝。
This method may be readily available for practical purpose since its procedure is simple and uses the conventional electroless plating.
該方法實用易得，因為它過程簡單并使用傳統的化學鍍。
The results show that the metal micro-tubes can be prepared by electroless plating using spider silk templates.
結果表明，利用天然蜘蛛絲為模板通過化學鍍的方法可以制備出具有極大長徑比的金屬微管。
Thus electroless Ni-P plating was used to repair the worn shaft and store the original size and surface precision.
對其采用鎳磷化學鍍技術修復，恢復至原尺寸和表面精度。
One disclosed example includes an electroless nickel-polytetrafluoroethylene coating.
一個公開的示例包括非電鍍的鎳-聚四氟乙烯覆層。
Concerning industrial applications, electroless plating is the preferred method of surface metallization of carbon nanofibers.
考慮到大規模的工業化應用，化學鍍是納米碳纖維表面金屬化的首選方法。
It has important academic significance and wide application to electroless plating on powders in this paper.
對粉體進行化學鍍具有重要的學術意義和廣闊的應用前景。
Theoretical analysis and numerical simulation methods for the electroless copper deposition is presented in this paper.
本文采用理論分析和數值模擬的方法模擬化學鍍銅的沉積過程。
In addition, the heat treatment of electroless plating coatings can obviously improve their properties.
此外，對碳納米管化學鍍層熱處理可以改善鍍層的性質。
Several pretreatment methods for electroless nickel plating on hollow glass microspheres were investigated.
研究了對空心玻璃微球化學鍍鎳的幾種前處理方法。
Described herein is a coating formulation for non-playable grade substrate prior to undergoing an electroless metal plating process.
說明了一種在無電電鍍過程之前用于不可電鍍的基底的涂層制劑。
Process specifications were discussed. The affecting factors on electroless Cu plating were briefly introduced.
討論了常溫化學鍍銅與著色處理的工藝規范，簡單介紹了化學鍍銅的影響因素。
The test terminal is constructed with an electroless plated layer formed on the test terminal.
測試端子包括通過無電鍍方法形成在測試端子上的無電鍍鍍層，從而不進行電鍍。
The process included the pretreatment of the templates, electroless plating, removing of the templates and the reduction treatment.
該方法包括模板的預處理、化學鍍、去模板以及還原處理。
The techniques and application of electroless Nickel Plating on Microelectronic packaging was researched.
本文對微電子封裝化學鍍鎳生產工藝及應用進行了研究。
It is of great significance to fast weld and repair damaged parts in electroless and gasless field.
野外無電無氣條件下，損傷零件的應急快速焊接修理具有十分重要的意義。
Laying basis on this, carried out an improvement experiment on the techniques of the electroless nickel plating on magnesium alloys.
并且以此為基礎，對鎂合金化學鍍鎳的工藝進行了改進。
The activation processes for electroless plating on nonmetal substrate at home and abroad were introduced.
介紹了近年來國內外非金屬基體化學鍍的活化工藝。
Stabilizers and their effect on electroless nickel bath are reviewed. Classification and mechanism of stabilizers are focused.
綜述了化學鍍鎳溶液中的穩定劑及其作用，重點討論了穩定劑的分類及其作用機理。
Fabrication methods including electroless plating, chemical vaPOr deposition, sol-gel technique and other methods are briefly discussed.
對化學鍍、化學氣相沉積、溶膠-凝膠法及其它涂層制備方法作了扼要討論。
Piston Rod: Hardened electroless nickel plated corrosion resistant, durable low wearing surface.
活塞桿：鍍鎳硬化耐腐蝕，經久耐用低磨損表面。
The mechanism of electroless plating tin was investigated from displacement process and reduction process.
對化學鍍錫的機理從置換過程和還原過程兩個方面進行研究。
A new procedure of surface activation without using palladium salt was proposed for electroless nickel plating on carbon nanotubes.
本文提出碳納米管表面無鈀活化的化學鍍鎳方法。
A novel process for mirror bright electroless nickel plating is studied and the bath formulations and operating conditions are optimized.
研究了一種鏡面光亮化學鍍鎳新工藝，優選了鍍液配方及工藝條件。
An electroless deposition technique on carbon fiber with higher copper deposition rate and stability was presented.
提出了一種有較高沉銅速率和穩定性的碳纖維化學鍍技術。
In this paper, the amount of heat lost from the electroless nickel bath with different insulating materials was estimated.
本文估算了包裹不同隔熱材料的化學鍍鎳液的散熱量。
The preparation of nickel nano-tubes via electroless plating using carbon nanofibers as templates is investigated.
主要研究了以納米碳纖維為模板，利用化學鍍工藝制備鎳納米管的方法。
And finally, one-step process of electroless nanocomposite plating was also researched.
最后，研究了一步法納米化學復合鍍工藝。
All four preferred electroless baths use hypophosphite as a reducing agent.
所有四個優先使用化學浴次磷酸鈉作為還原劑。
