fem
美 
英 [fem]
- n.〈美俚〉女子
- adj.女人似的
- 網絡有限元法(finite element method)；有限元方法；有限單元法
英漢解釋
n. | |
adj. | |
na. | 1. Lib, Femlib 〔美國〕婦解,婦女解放運動 |
例句
Two kinds of sample had been measured, For the flexible slim macromolecule sample, FEM had been used to validate the measurement results.
采用兩類樣品測試：一類是柔性高分子薄片，通過對薄片振動的有限元分析驗證測試的正確性；
There was no doubt that we would win the game after a fem more goals were scored.
又進了幾個球之后，毫無疑問，我們會贏得這場比賽。
Summary of Background Data. FEM has been reported to predict vertebral strength in vitro, but has not been used clinically.
背景資料概要：非線性有限元模型被報道來猜測體外的椎體強度，但尚未應用于臨床。
The electrogram data sensed at each of the plurality of locations in the heart is mapped to a corresponding element of the FEM.
在心臟中的多個位置中的每一個位置處所感測的電描記圖數據被映射為FEM的相應元素。
FEM has been used to simulate and analyze the high pressure rubber forming process of part with flange bending.
利用有限元技術，對凸翻邊鈑金零件的高壓橡皮成形過程進行模擬分析。
The FEM can be expressed mathematically as an FEM matrix made up of the elements, and can also be displayed in graphical form.
FEM可以在數學上被表示為由元素組成的FEM矩陣，并且也可以以圖形形式來顯示。
We applied the FEM that was not accommodation to the complicated engineering problem. And the result of random would be caused.
對于復雜工程問題，有限元法使用不當會導致結果的隨機性。
So the stress concentrate was improved. FEM avoided the predigestion of traditional methods, and the result was more accurate and credible.
有限單元法的應用避免了使用傳統方法時必須進行的大量簡化，計算結果更為精確可靠。
But if I were a stormtrooper naturally I would need the perfect partner thus the Fem Trooper idea was born!
但如果我是一個風暴戰士，那么自然我需要一個完美搭檔，因此Fem戰士的想法誕生了！
Finally, the critical length of the key wall is studied by means of FEM.
最后用有限單元法研究了齒坎的臨界長度。
The stability of this new structure has been studied by means of FEM simulation with reduction of the soil strength.
采用有限元強度折減法研究該隧道出口段邊坡與整個支擋結構的穩定性。
then , numerical simulation and evaluation for the total flywheel system was performed by the fem software.
利用有限元軟件，對高轉速下彈塑性工作狀態下的整個飛輪轉子系統，進行了數值計算及仿真模擬。
FEM NTA coupling model is set up for simulation of mining conditions at great mining height with an overlying rocks of low tensile strength.
在重點模擬大采高條件下覆巖低抗拉特性的基礎上，建立了“大采高FEM-NTA耦合模型”。
The procedure uses FEM to create a storage policy with an explicit list of storage areas that are assigned to it.
該過程使用FEM創建一個存儲策略，并為之指定一個存儲區域列表。
The analysis of a bus chassis frame by FEM is now becoming an essential technique to design bus structure .
在汽車結構設計中，有限元分析法已經成為必備的技術手段。
The comparison between the experimental data and the simulation results indicates the availability and effectiveness of this FEM method.
通過與他人實驗數據的對比，驗證了磁場有限元分析方法的可行性。
Thirdly, the simulation of concrete crack has been a difficult problem for normal FEM ever since.
鋼筋混凝土結構的裂縫模擬處理一直是常規有限元難以有效解決的問題。
The result of FEM displays the intensity and stiffness of this mold-frame accord the requirements.
有限元分析計算結果表明本模架的強度和剛度符合使用要求。
The flexible hinge was also analyzed by a FEM simulation software and its feasibility and security were validated.
利用有限元分析軟件對放大機構進行了分析，進一步驗證了放大機構的可行性和安全性。
Its validity was concerned by the comparison with the results obtained by Finite Elemental Method(FEM) for a squared porous medium.
通過與多孔方腔物理模型的有限元數值解進行比較，驗證了本章所用方法的可靠性及精度。
and the result agrees well with that of EGD-3 using the stress concentration coefficient on the basis of FEM under the low cycle load.
在高低周載荷下，使用有限元法計算應力集中系數的EGD-3方法計算的主軸疲勞壽命更符合實驗結果。
The contact zone between roller and workpiece and its contour's definition are the cruxes of establishing the FEM mechanical model.
在建立筒形件強旋有限元力學模型過程中，旋輪與工件接觸區及其邊界的描述是重要的一環。
Meanwhile, the result of FEM analysis can work as the basis of structural optimization design.
同時，有限元分析所得到的計算結果可作為結構優化設計的基礎。
The results showed that FEM could be applied to the evaluation of electromagnetic environment in buildings struck by lightning.
研究結果表明，采用有限元方法能夠運用于雷擊對室內建筑物電磁環境的評估。
The Lagrangian description is a material description, and is typically represented by the finite element method (FEM).
拉格朗日描述法是對物質點的描述方法，其典型代表是有限元法。
The design of the body frame topologic structure is presented, using FEM-based topological optimization technique.
利用基于有限元法的拓撲優化技術設計車身大骨架的拓撲結構。
The interactive technology of graphics is widely applied to the preprocessing and the post processing modules of the modern FEM software.
圖形交互技術被大量運用于現代有限元軟件的前后處理模塊當中。
Using FEM to simulate the stress-strain status and the deformation process, mesh movement law of the plastic helical gear is obtained.
運用有限元方法，模擬塑料斜齒輪的應力應變狀態與齒廓變形過程，從而得出了塑料斜齒輪嚙合的變化規律。
With FEM simulation, the cost and tooling design time can be reduced significantly by minimizing the number of try outs.
通過有限元法分析可減少試模次數，從而降低消耗，縮短模具設計時間。
The distribution of indoor electromagnetic field in a building struck by lightning was analyzed by the finite element method (FEM).
采用有限元分析方法計算了建筑物框架遭受雷擊時室內電磁場的分布。
Contact treatment is one of key factors influence the FEM simulation accuracy and efficiency.
接觸處理方法是影響有限元數值模擬精度和效率的關鍵因素。
Taking the oil pan of an engine as an example, the FEM model of a thin-walled structure is established.
以某發動機油底殼為研究對象，建立了薄壁結構的有限元實體模型。
The FEM solution of an axially symmetrical temperature field was presented in consideration of the electromagnetic-temperature coupling.
給出了基于電磁場-溫度場耦合的軸對稱溫度場有限元求解方法。
The frequency of complicated thin plate with any concentrated masses can be computed by ANCM, and the time cost is less than FEM.
解析數值法可以計算復雜的帶有集中質量的薄板的頻率，并且比有限元方法花費更少的時間。
With the rapid development of computer technology and FEM theory, FEM have been popularly used in the analysis of sheet metal forming .
隨著計算機技術的迅速發展和有限元理論的日趨成熟，計算機模擬仿真法在板料成形分析中的應用越來越廣。
The optimization method was verified to be correct and feasible by analyzing the optimization results using FEM.
通過有限元方法對優化結果進行分析，驗證了優化方法的正確性與可行性。
The Finite Element Method (FEM) is applied to numerically simulate the tidal flow in the vicinity of the river mouth of Yellow River.
用有限元方法對黃河河口海域的潮流海洋動力過程進行了數值模擬和分析；
The chip formation processes in cutting 45 steel under different cutting speeds are simulated by means of finite element method (FEM).
采用有限元方法仿真了不同切削速度下加工45鋼的切屑形成過程。
Comparison between the FEM analysis results and the formula in related code showed that the formula gives conservative result.
并將有限元分析結果與規范相應公式的計算結果進行了比較，規范相應公式計算結果偏于保守。
This paper provides references for the thermal mechanically coupled-field simulation of the multi-pass rolling process by FEM.
研究結果為多道次軋制過程的熱力耦合分析提供了參考。
