hot-rolled
美 
英
英漢解釋
例句
The effort of rotary de-scaling on the surface quality of a pickled hot-rolled strip is shown in figure 9.
圖9表明了旋轉除銹器對于熱軋板帶表面質量的影響。
The surface blow hole defect in continuous casting slab and hot rolled plate can be eliminated by utilizing no argon blowing.
采用不吹氬氣的生產工藝可以消除連鑄坯和熱軋板表面氣孔缺陷。
Hot rolled stainless steel bars that are annealed and cold worked to produce a higher surface quality and higher strength.
經過退火及冷加工的熱軋不銹鋼棒材，其表面質量更高，強度也更高。
In making the decision of the revocation of export taxes rebate, market related hot-rolled steel has such a modest recovery.
在作出取消出口退稅的決定前，市場上相關的熱軋等鋼材品種已經出現了小幅的反彈。
Hot-rolled bar of GH4049 alloy is an important materials of turbine blades and mainly used for manufacturing turbine blades of aeroengine.
GH4049合金熱軋棒材主要用于制造航空發動機的渦輪葉片，是重要的渦輪工作葉片的材料之一。
The bubbles on the surface have bad effect on the appearance quality and further resistance of rusting of hot rolled ribbed bar.
前言：熱軋帶肋鋼筋表面氧化鐵皮“起泡”現象，嚴重影響產品外觀和防銹效果。
Other flat-rolled products of iron or non-alloy steel, hot-rolled, not in coils, with patterns in relief, of a thickness of less than 3 mm.
其它熱軋之鐵或非合金鋼扁軋制品，非卷盤狀，厚度小于3公厘，經軋壓凸紋者。
In the process of rolling machining and exposure to air, the hot-rolled wire will inevitably be formed a thin oxide scales on the surface.
其在軋制過程中以及在之后的空冷過程中，表面會自然形成一層薄的氧化鐵皮。
At last, the paper will choose one or two kind of hot-rolled oil which have the better performance to prepare for the debugging in future.
最后，結合模擬實驗研究的結果，本文將從中篩選出一種或者兩種性能較優的熱軋油為今后的現場調試工作做好準備。
HRB500 bar is a new hot rolled ribbed bar with hi-strength and strong ductility, which has been used widely in foreign countries.
HRB500級鋼筋是一種強度高、延性好的新型熱軋帶肋鋼筋，在國外已得到廣泛應用。
Other flat-rolled products of stainless steel, hot-rolled, not in coils, of a thickness of less than 3 mm.
其它熱軋不銹鋼扁軋制品，非卷盤狀，厚度小于3公厘者。
Finally, FEA was used to analyze the drawing performance of those high strength hot rolled sheet metals.
最后，本文對幾種高強度熱軋鋼板的圓筒拉深過程進行有限元分析。
The significance is discussed of increasing output of thin and ultrathin hot rolled strip used to substitute part cold rolled strip.
分析了增產薄規格和特薄規格熱帶，用以代替部分冷軋帶卷具有的重要意義，進而對其市場需求進行了預測。
H section of iron or non-alloy steel, not further worked than hot-rolled, hot-drawn or extruded, of a height of less than 80 mm.
鐵或非合金鋼制H型，熱軋、熱抽或擠制后未進一步加工，高度小于80公厘者。
The cost of the benchmark hot rolled coil steel is likely to hit $725-$750 a tonne by the end of next quarter, up from $550 in January.
基準的熱軋卷鋼的成本可能在下個季度末達到每噸725至750美元，而1月份只有550美元。
Other flat-rolled products of stainless steel, hot-rolled, not annealed and pickled, not in coils, of a thickness exceeding 10 mm.
其它熱軋不銹鋼扁軋制品，未經熱軋退火酸洗，非卷盤狀，厚度超過10公厘者。
U, I or H sections, not further worked than hot- rolled, hot-drawn or extruded, of a height of less than 80mm.
槽鋼、工字鋼及H型鋼，除熱軋、熱拉拔或熱擠壓外未經進一步加工，截面高度低于80毫米。
Therefore, the hot-rolled sheet annealing temperature should be as low as possible with the precondition of fully recrystallization.
所以，在保證熱軋板發生完全再結晶的前提下，退火溫度應盡量低。
Other flat-rolled products of stainless steel, hot-rolled, not in coils, of a thickness of 3 mm or more but less than 4. 75 mm.
其它熱軋不銹鋼扁軋制品，非卷盤狀，厚度3公厘及以上，但小于4.75公厘者。
Fabricate frames, concealed stiffeners, reinforcement, edge channels, louvers and mouldings from either cold-rolled or hot-rolled steel.
制造門框，內加強筋，加強板，邊槽，百葉窗和模件，可選用冷軋或者熱軋鋼板。
Hot rolled steel plates are important raw materials for weighty equipment manufacturing trades like for producing electric machineries.
熱軋鋼板是電力、機械等重大裝備行業的基本原材料，如何提高其生產率降低損耗是設備制造行業要研究的問題。
Other flat-rolled products of stainless steel, hot-rolled, not in coils, of a thickness exceeding 10 mm.
其它熱軋不銹鋼扁軋制品，非卷盤狀，厚度超過10公厘者。
Therefore, the choice of hot-rolled oil in the rolling process, as well as the changes is very import to the quality of hot-rolled strip.
因此，熱軋油的選擇以及對其在軋制過程中變化情況的研究對于提高熱軋板帶質量非常重要。
The overseas current production situation, development and the characteristics of hot rolled galvanized sheet are introduced.
介紹了國外熱軋板熱鍍鋅生產的現狀和發展，以及熱軋板鍍鋅生產的特點；
Bars and rods of alloy tool steel, not further worked than hot-rolled, hot-drawn, or extruded, of a diameter 100 mm or more.
合金工具鋼條及桿，熱軋、熱抽或擠制后未進一步加工，直徑100公厘及以上者。
'Steel buyers in the United States are bearish on the price outlook for hot-rolled, ' he says.
馬庫斯說，美國的鋼鐵買家看跌熱軋鋼的價格前景。
The application on a certain hot-rolled steel production line has demonstrated its effectiveness.
在某鋼鐵企業熱軋生產線上實際應用中，取得了良好的應用效果。
T section of iron or non-alloy steel, not further worked than hot-rolled, hot-drawn or extruded, of a height of 80 mm or more.
鐵或非合金鋼制T型，熱軋、熱抽或擠制后未進一步加工，高度80公厘及以上者。
As major facilities of the hot rolled pipe production line located in the pipe rolling division of Tianjin Steel Tube Corp.
脫管機和定徑機是天津鋼管公司軋管廠熱軋管生產線上的主要設備。
Hot rolled weldable steel bars for pressure purposes with specified elevated temperature properties.
具有規定的高溫特性的壓力容器用熱軋可焊接鋼棒
The production planning of hot rolled strip is a complex combinatorial optimization problem of multi-objective and multi-constraint.
熱軋帶鋼生產計劃問題是一個多目標，多約束的復雜組合優化問題。
The relation between the performance of hot rolled plate and the nitrogen content in the steel are discussed.
討論了熱軋板性能與鋼中氮的關系；
This paper describes the hot-rolled energy consumption, the impact factors on energy consumption and the improvement direction.
闡述了鋼鐵企業熱軋能耗的狀況、能耗的影響因素和改進的方向。
Zinc scaling was occurred in the early products of hot rolled galvanization line in TanShan Iron and Steel Limited Cooperation.
唐鋼熱軋熱鍍鋅生產線調試初期的產品在加工使用過程中，出現了脫鋅的現象。
Should the price of hot-rolled steel fall to less than $650 a metric ton, the industry could see weaker steel makers fail.
如果熱軋鋼的價格跌至每噸650美元以下，該行業可能會看到一些較弱小的鋼鐵廠商倒閉。
This paper presents an artificial neural network model to predict the rolling force to control hot-rolled strip strip thickness.
研究了熱軋板帶厚度控制中軋制力預報環節的局部逼近神經網絡實現方法。
Continuously hot-rolled low carbon steel sheet and strip for cold forming. Technical delivery conditions.
冷定型用連續熱滾低碳鋼片材和帶材.技術提交條件
Bars and rods, for welding electrodes, hot-rolled, in irregularly wound coils, of silicomanganese steel.
熱軋硅錳鋼條及桿，焊接電極用，繞成不規則卷盤狀。
Hot-rolled steels for quenched and tempered springs - Technical delivery conditions.
淬火回火彈簧用熱軋鋼.交貨技術條件
This article mainly aims at wisco in ultra-low carbon steel rolling two hot-rolled strip, edge folding defects of were studied.
本文主要針對武鋼二熱軋在軋制超低碳鋼帶鋼時，邊部出現的折疊缺陷進行了研究。
