microcontroller

美 　英 [ma?kr??k?nt'r??l?r]

• n.微控制器；微型控制器
• 網絡單片機；微處理器；微控器

英漢解釋

n.	1. 微控制器 2. 微型控制器

例句

A microcontroller is often small and low cost. The components are chosen to minimize size and to be as inexpensive as possible.

一個微控制器通常很小，并且成本很低。組件的大小是越小越好，價格越低越好。

MCS-51 microcontroller which is all typical and representative of a widely used in various fields.

其中51單片機是各種單片機中最為典型和最有代表性的一種，廣泛應用于各個領域。

Mainly used for transistor output characteristic curve for data collection, controlled by a microcontroller, into the PC, for display.

主要用于對晶體管輸出特性曲線進行數據采集，由單片機進行控制，送入PC機進行顯示。

To increase the accuracy of the system, a calibration or conditioning algorithm must be programmed into the microcontroller.

為了增加系統，校準或調節算法精度必須被編程到微控制器。

Master in part by the microcontroller and keyboard of two parts, shown in part by the LCD display module and LED work analog parts.

主控部分是由單片機和鍵盤兩部分構成，顯示部分是由LCD顯示模塊和LED工作模擬部分構成。

The accomplishment of this microcontroller can settle a strong base to design other ASICs and implement system integration.

本微控制器的設計完成可以為將來開發具有特殊用途的專用集成電路以及實現系統集成奠定堅實的基礎。

In microcontroller serial port communication, the system require that the baud rate of dispatcher and sink should keep consistent.

在單片機串行通信中，要求發送和接收的波特率保持一致。

The microcontroller reads the state of a pin through the Pin value line, and writes though the latch value line.

微控制器讀取通過引腳值線引腳的狀態，并寫入鎖存盡管價值線。

The microcontroller and computer can easily communicate through serial port, thus the system can be controlled by user with computer.

單片機和上位機之間通過串口通信，可以用計算機操縱整個系統。

CAN controllers with object storage are designed to take as much strain as possible off the local microcontroller.

能與對象存貯的控制器被設計采取同樣多張力盡可能地方微型控制器。

Finally, it would need to accomplish all of these tasks under the control of a software program running the microcontroller chip.

最后，需要在微處理器芯片上運行軟件編程控制來完成所有這些任務。

Thedownloading program receives the new application program and loads it into a readonly memory external to the microcontroller.

裝載程序接收新的應用程序并存儲到單片機的外部ROM中。

In secondary circuit, the microcontroller receives command signals to control the rotation direction of implanted electric knuckle.

次級單片機接收命令信號，控制植入電動關節的旋轉方向。

The hardware and software designing of a microcontroller system supplied by energy transmitted through optical fiber is described.

介紹以光纖傳輸的能量供電的微控制器系統的軟硬件設計。

The small footprint module adds an OPC-UA Server to any product via an integrated RJ-45 Ethernet interface and ARM microcontroller.

通過將RJ-45以太網接口和ARM微處理器相結合，小尺寸模塊將OPC-UA服務器增加到任何一個產品中。

A basic data path configuration capable of processing the microcontroller basic instruction set was developed first.

一個根底數據途徑可以對被設定的微節制器根本指令告狀的設置裝備擺設是起首開展。

If the input dimming comes from a microcontroller, the power from the AC line needs to be appropriately managed.

如果用微控制器進行輸入調光，那么必須對AC線路電力加以適當管控。

Each 12-battery module contains a PC board with an LTC6802, a microcontroller, a CAN interface, and a galvanic isolation transformer.

每個由12個電池組成的模塊都含有一個PC板，板上有1個LTC6802、1個微控制器、1個CAN接口和1個電流隔離變壓器。

Basically, any product or device that interacts with its user has a microcontroller buried inside.

基本上，任何能夠與使用者互動的產品或設備，其中都埋入了微控制器。

Since each LED is only supposed to be on one at a time , we can drive the whole array pretty easily, and directly from the microcontroller.

由于每個LED在一個時刻只亮一盞，我們可以輕而易舉地直接由微型驅動器驅動整排LED。

The design of receiver module includes the one of radio frequency receiver, microcontroller and human-machine interaction.

接收器模塊的設計包括射頻接收電路設計、控制器單元設計和人機交互能力設計。

The status of the pin of the microcontroller depends upon values of the DDR bit, the port bit, and its external connection.

微處理器的管腳狀態依靠DDR位的值、端口位和其外部連接。

Inother words the microcontroller is not a standard component and this increases its cost of manufacture.

換而言之，單片機不是標準器件，這就增加了生產成本。

With the combining of this PWM generator and microcontroller, sine wave inverter at high temperature is prepared.

該PWM發生器與微控制器密切配合，實現了高溫正弦逆變。

Also the program counter keeps track of which command is to be executed by the microcontroller .

程序計數器也通過微控制器掌握要執行哪條命令。

Most microcontroller applications, more comprehensive.

單片機大多數應用，比較全面。

The integration of power and analog elements with a CMOS microcontroller unit (MCU) has been possible for several years.

電力供應與帶有互補金屬氧化物半導體的微控制器單元的模擬要素的整合已經可用了數十年了。

Using a dedicated high-speed magnetic sensors with microcontroller (MCU) electronic compass can effectively solve these problems.

本系統采用專用的磁場傳感器結合高速微控制器（MCU）的電子指南針能有效解決這些問題。

This system uses a hierarchical, modular design, the entire system consists of data acquisition systems, microcontroller control system.

本系統采用層次化、模塊化設計，整個系統由數據采集系統、單片機控制系統組成。

Design steps, implementation and testing of all the microcontroller development circuits are shown graphically and explained in detail.

計劃步調，施行和檢驗一切的微節制器開展電路圖解式地被顯現而且細致地注釋。

This system using C language program, thereby to microcontroller programming higher efficiency, to expand and transplantation.

本系統采用C語言對單片機編程，從而使編程效率更高，更易擴展和移植。

The train location, turnout circuit and the signal light control circuit of this system are based on MSP430F149 microcontroller.

設計了基于MSP430F149單片機的列車定位和道岔、信號燈制約的相關電路。

Now, only a few centimeters square microcontroller, write a simple program, you can make your previous circuit is much simpler.

而現在，只需要一塊幾厘米見方的單片機，寫入簡單的程序，就可以使您以前的電路簡單很多。

and the intelligent domestic equipment possesses antenna, radio receiving and transmitting module and microcontroller.

智能家電設有天線、無線收發模塊和微控制器。

But only the microcontroller knowledge is not enough, should be based on the hardware structure, perfect soft combination.

但是，僅單片機方面的知識是不夠的，還應根據硬件結構軟硬結合，加以完善。

Currently microcontroller penetrated into every aspect of our lives, and almost no hard to find traces of MCU which field.

目前單片機滲透到我們生活的各個領域，幾乎很難找到哪個領域沒有單片機的蹤跡。

Based on this configuration, a four-bit microcontroller was developed from its most basic instruction set to the most complex one.

以這一個設置裝備擺設為根底，一個四個位元的微節制器被開展從它的最多根本指令設定到一個最龐大的。

Now the solutions of several problems about microcontroller application are illuminated here for exchange with colleagues.

現就單片機應用中幾個問題的解決方法加以說明，與各位同行交流。

Precise firing monitoring is ensured by microcontroller control independent of voltage fluctuations.

微控制器控制系統不受電壓波動影響，保證了精確的導入火焰。

To facilitate the upgrading of the system, the ARM7 LPC2292 microcontroller was used as the dominant CAN module.

為了便于系統的網絡升級，在系統設計中使用了ARM7微控制器LPC2292作為CAN總線的主控模塊。