Sem.
美 
英
英漢解釋
英英解釋
例句
SEM micrographs indicate that there existed perfect interfacial adhesion between the surface layer and the substrate one.
對過渡層研究結果表明，復合面層與混凝土基材間的粘接性優異。
It was found that there was no reaction between coating layer and aggregate through SEM studies on interfacial transition zone.
通過掃描電鏡觀察再生粗骨料的界面過渡區，發現涂漿層不與骨料本身反應。
SEM observation suggested that the wear mechanism of FEP coatings appeared to be obvious fatigue wear at relatively high temperatures.
在較高的環境溫度下，涂層的磨損呈現出明顯的疲勞磨損特征。
The microstructure of the welding joint was analyzed by SEM, and its corrosion property was tested by an electrochemical system.
利用掃描電鏡分析焊接接頭微觀組織；電化學系統測試接頭各區腐蝕速率；
The surface morphology of the films were observed by Scan Electron Microscope (SEM) and Atom Force Microscope (AFM) respectively.
用掃描電鏡、原子力顯微鏡觀測了非連續多層膜的表面形貌。
The surface morphology of the polymer film was examined by scanning electron microscopy (SEM) and atomic force microscopy (AFM).
高分子膜的表面形態采用掃描電子顯微鏡（SEM）和原子力顯微鏡（AFM）進行檢查。
One of each group was remained for veneering porcelain at the end of it, and was observed with SEM and energy spectrum analysis. 3.
每組各留一個試件，上瓷時將瓷烤在金屬試件的末端以做掃描電鏡和能譜分析。
Methods To identify the holistic morphology and the surface ultrastructure characteristic of seeds by scanning electron microscope(SEM).
方法采用掃描電鏡觀察三種種子的整體形態和種皮表面超微結構特征。
STEM and SEM investigations confirm the location of these metal particles is only inside the carbon nanotubes.
使用掃描電鏡和掃描透射電鏡研究證實金屬粒子僅存在于納米碳管內部。
This paper has analyzed the surface and cross-section morphology and the phase composition of the ceramic coatings by using SEM, XRD.
采用SEM、XRD等方法對陶瓷膜的表面微觀形貌、結構及成分進行了表征。
SEM observation shows that the crystals by pulse current are smaller and the surface is smoother than that of by direct current.
脈沖鍍層比直流鍍層的結晶更細密，表面更光滑平整。
The surface appearance and corrosion products of Zn-Mg alloy coatings with different content of Mg were analyzed by SEM and XRD.
采用掃描電鏡和X射線粉末衍射，對含鎂量不同的熱鍍鋅鎂合金鍍層表面形貌和腐蝕產物進行了分析。
The body size of leptophlebiid mayflies are usually very small, many microscopical and SEM structures have been employed in previous work.
細裳蜉科蜉蝣個體較小，對本科的研究又相對較深入，很多情況下要用到極細微結構特征。
The fracture analysis was made by means of microstructure, macrostructure, SEM, chemical composition, stress measurement and calculation.
采用宏、微觀、掃描電鏡、化學分析、應力測定及計算等方法對斷裂螺母進行了分析。
The results of SEM and EDS analysis indicate that Ni-Co could be plated on the surface of cenospheres comparatively homogenous.
掃描電鏡和能譜分析表明鎳鈷合金被均勻地施鍍到了微珠表面。
The heat aging properties of rigid PVC are studied by means of mechanical properties test, SEM and FT-IR.
采用力學性能測試、掃描電鏡、紅外光譜（FT-IR）等方法研究了硬質聚氯乙烯的熱老化性能。
In this study, the low-loss electron (LLE) method in the SEM was applied to CMP samples at close to a right angle to the beam.
在這項研究中，低損耗電子（阿勒）在掃描電鏡方法應用于中醫樣本接近直角的光束。
SEM result indicates that the mycelium on the surface of ectoblast of Nocardia cell is the important attachable site.
掃描電鏡檢測結果表明，諾卡氏菌細胞表面的菌絲是重要的吸附部位；
The fracture reason of high temperature fixture was analyzed by means of metallographic examination, SEM and chemical composition analysis.
采用金相檢驗、掃描電鏡觀察和化學成分分析等方法對萬能材料試驗機高溫卡具斷裂原因進行分析。
SEM images show that the surface of the microsphere was not smooth, and the inside was loosen.
掃描電鏡照片顯示，微球的表面并不圓滑，內部為疏松的網絡結構。
The obtained silver nanoparticles were characterized by means of powder X-ray diffraction (XRD) and scanning electron microscope (SEM).
并用X射線衍射（XRD）和掃描電子顯微鏡（SEM）對所得銀納米杜子進行表征。
The cracked longitudinal beam of a coach was analysed by means of metallography and SEM .
用金相、掃描電鏡等分析方法，對開裂的客車縱梁進行了分析。
Through analyses carried out with SEM, tool failure patterns under different cooling and lubricating modes were studied.
借助掃描電鏡的檢測手段，研究了不同冷卻潤滑條件下刀具的失效形式。
And the result of the SEM indicated that job burnout played a mediating effect between occupational stress and depression symptoms.
結構方程模型分析結果顯示，職業倦怠在職業緊張和抑郁的關系中起到了中介作用。
The morphology, status, chemical state & properties of the composite deposits were studied by means of SEM, TEM and XRD.
利用SEM，TEM，XRD等方法研究了復合鍍層的組織、結構、性能及其影響因素。
Au nanoparticles were characterized by means of scan electron microscope (SEM), scan probe microscope (SPM) and X-ray diffraction (XRD).
利用掃描探針顯微鏡、掃描電子顯微鏡和X射線衍射等技術對制備的金膠體進行表征。
SEM is an important means for the observation and study of the artificial opal photonic crystal.
掃描電子顯微鏡是對人工歐泊光子晶體進行形貌觀察、研究的重要手段。
Results: SEM is a Synthetic thinking and analytic approach. It has its own particular advantage but several deficiencies.
結果：結構方程是一種綜合思維方法，有著其獨有的優勢，也具有一定的局限性。
The analysis by SEM showed that the salt slurry changed the micro-appearance of the desulphurization agent particles.
通過SEM分析發現，鹽泥使固硫劑顆粒的表面微觀形貌發生改變。
The film-forming situation of the product compounds on the surface of the steel sheet was observed by SEM.
用SEM技術觀察產物化合物在鋼片表面的成膜情況，參照文獻對其進行復配。
Scanning electron microscopy combined with energy-dispersive x-ray spectrometry (SEM-EDXS) is widely used for particle analysis.
掃描電鏡結合能量色散X射線光譜法（掃描電鏡EDXS）是廣泛用于顆粒分析。
The surface morphology and section view of Al substrate in different conditions and Cr deposition were observed by SEM.
利用掃描電鏡（SEM）及背散射電子像，觀察了不同條件下基體與鉻鍍層的表面及斷面形貌。
The element valence, crystalline phase, microstructure have been studied by means of XPS, XRD and SEM.
壓電陶瓷的元素價態，相組成以及顯微結構。
The standard error of the mean (SEM) is a measure of how far your sample mean is likely to be from the true population mean.
標準誤差的平均值（掃描電鏡），是衡量有多遠你的尿樣的意思是可能會被從真實人口的意思。
The abrasive erosion pattern of the impeller blades of a used slurry pump is investigated by macro observation, and analyzed by SEM method.
對一個實際清淤中磨損失效的泥漿泵輪葉片表面進行宏觀觀察，并利用掃描電鏡作了微觀形貌分析。
The morphology, component and physical characteristics of barite and solid inclusion are studied by means of SEM and microprobe etc.
用掃描電鏡、電子探針等分析研究了重晶石和固體包裹體礦物的形貌、成分和物理性質。
SEM analysis show that after the fast neutrons irradiation, B4C coating internal crack, EDS analysis did not detect B.
SEM分析表明，B4C涂層經快中子輻照后，涂層內部出現裂紋，EDS未檢測出B。
The surface layer of shot peening strengthening was analyzed with OM, SEM and TEM.
采用金相顯微鏡、掃描電鏡和透射電鏡分析材料噴丸強化層。
With the studies of release curves and SEM photos of the microcapsules, it was shown that two kinds of release profile might exist at least.
溶出曲線和微囊形貌結構照片研究表明，可能至少存在兩種不同的溶出釋放通道。
And the properties of vertical crystallization area and of the lateral crystallization area are compared by SEM and RAMAN.
并通過SEM、RAMAN的測試方法對橫向結晶區域與縱向結晶區域進行了比較。
