box-shaped
美 
英
英漢解釋
例句
Box-shaped structure built with telescopic cylinders, lifting devices, hydraulic cylinder amplitude can be achieved.
箱形結構內裝有伸縮油缸，起重裝置的變幅可通過液壓缸實現。
The battery pack has a hard outer jacket member, a box-shaped or plate-shaped battery element, a cover, and a circuit board.
容納在外殼部件中并具有連接到電路板的電極端子導線的盒形或板形的電池元件；
A box shaped car or truck has to exert more force to move through the air causing more stress on the engine making it work harder.
一個方框形汽車或卡車已施加更大力量將通過空氣造成更多的壓力使發動機更加努力地工作。
A leg restoring device is installed around each leg at the top of the box-shaped steel frame.
一條腿恢復設備安裝大約每腿在頂部的盒形鋼架。
His most famous home is the Fisher house near Philadelphia. It is made of several box-shaped buildings.
他最出名的民房當屬費城附近的釣屋，它由數幢箱形樓房構成。
The home consists of four equal, box - shaped structures, constructed from wood and clad in corrugated metal .
在家由四個平等，盒形結構，建造木材和金屬包層的波紋。
The thinning ratio of the box-shaped products reduces with the increase of cushion time.
盒型件的減薄率隨緩沖時間的增大呈減小趨勢。
A four-wheeled, open, box-shaped wagon or iron car run on tracks in a coal mine.
礦車、煤車煤礦中在軌道上行駛的四輪、開口、盒狀的運貨車或鐵制車廂
a small box-shaped passenger van; usually has removable seats.
一種盒式的小型客車；通常含有抽取式座位。
This paper, using a telescopic, box-shaped structure.
本文中，采用了伸縮式、箱形結構。
Humans running geometry that is box shaped or pyramidal will tend to draw a dark earth dream to one's life dance.
運作盒狀或金字塔狀幾何學的人類，將傾向于在生命之舞中驅動黑暗地球夢想。
The Method for the Estimation of Motions of Box-shaped Buoyant Bulls in waves and Its Application in the Engineer
箱形浮體在波浪上運動的特性計算方法及其應用
Construction Techniques of Long-span Concrete-filled Steel Tubular Box-shaped Vault Rib Subsection Prefabrication
大跨度鋼筋砼箱形拱肋分段預制施工技術
Construction technique on jacking of box-shaped structure under railway track in multiple adverse condition
多種不利因素疊加地段線路架空箱橋頂進施工技術
Design of the Sequentially Opened Hot-Runner Stacked Injection Mould for Shallow Box-Shaped Parts
淺盒形件順序開模熱流道疊層式注射模設計
Safety management measures during jacking of box-shaped structure crossing existing railway
既有線頂進立交橋的施工安全管理措施
Design of Injection Mold for Plastics Spare Parts of Box-Shaped of Three Surfaces Apart Each Other
盒形塑件三分型面注射模的設計
Analysis on causes of crack in certain box-shaped structure and its remedy measures
某框架橋裂縫原因分析與處理
Construction technique for jacking of new box-shaped structure and demolishing of old one
頂進新橋同時拆除既有橋施工技術
Jacking of a Box-shaped Frame Bridge under an Existing Railway
道路下穿既有鐵路箱形框架橋頂進法施工技術
Analysis and Measure to Generation of Wrinkle during Warm Deep Drawing of Box-shaped Magnesium Alloy Product
鎂合金盒形件溫拉深起皺原因分析及措施
Analyses of Stresses and Force Transmission Route in Box-Shaped Anchorage Zone for Cable-Stayed Bridges
斜拉橋錨箱式索梁錨固區應力及傳力途徑分析
Research on Stress Conditions of Box Shaped Supporting Beam before and after Reinforcement in the Huangtankou Hydropower Station
黃壇口水電站支承梁加固前后的應力研究
Design of track reinforcement at construction of box-shaped culvert with top slab in the turnout section
在道岔區建造蓋板箱涵的線路加固設計
Exhaust of Combustible Airflow of Box-Shaped Structure Vertical Launch System
箱式垂直發射系統燃氣流的排導
Mechanization Construction of Large Scale Box-shaped Concrete Beam for Casting on Site
大型現澆箱梁混凝土的機械化施工
Design and Construction of Box-shaped Beam Supported Frame in Beam-type transfer Store
梁式轉換層中箱形框支梁的設計與施工
Study of parametric CAD system of box-shaped machine parts
箱體類零件參數化CAD系統的研究
Calculation of the Blanks of Low-walled and Box-shaped Drawing Parts
矮壁盒型拉深件毛坯計算
Application of the Drawing Rib in Forming of the Box-Shaped Parts
拉伸筋在盒形件拉伸成形中的應用
Design of the Die for Piercing the Non-Circular Hole in the Curved Surface of the Box-Shaped Part
盒形件圓弧曲面上非圓形孔沖模設計
Stability analysis of tied arch bridge with steel box-shaped arch-ribs
鋼箱拱肋系桿拱橋的穩定分析
Injection Mould Design of Three Times Parting of Box-shaped Part
盒形塑件三分型面注射模設計
Application of CAE Technology in Box-Shaped Drawing
CAE技術在盒形件拉深的應用
The Hanging Trimming Die for Box-Shaped Drawn Parts
盒形拉伸件懸掛式切邊模
Box shaped module open on two sides
兩側被打開的盒形組件
