carburized
美 
英
例句
The facts have proved that this instrument can meet the need of actual manufacture for the depth of carburized layer measurement.
實踐證明，該儀器完全能滿足生產實際對滲碳層深度的測量要求。
Rare earths can getcarburized granules on the surface of alloy steel fined, with diffusion even, the carburized layer thickened.
稀土能使合金鋼表層碳化物顆粒細化，均勻彌散分布，碳化物層加厚。
The metal carburized layer depth is one of the major technical parameter to evaluate the quality of carburized components.
滲碳層深度是衡量滲碳件質量的主要技術指標之一。
This paper compared several testing methods of carburized depth of high air pressure drill and evaluated their accurately and practicality.
比較了高風壓鉆頭滲碳層深度的不同檢驗方法，并對其正確性和實用性進行了探討。
Results showed that contact fatigue property of carburized gear samples was better than that of nitrided gear samples.
試驗結果表明，滲碳處理試樣接觸疲勞性能優于調質氮化的試樣。
Steel - Determination and verification of the depth of carburized and hardened cases.
鋼.滲碳層和硬化層深度的測定和檢驗
Furthermore, the kinetic equation of carburized layer growth was presented.
此外，還給出了滲層生長的動力學方程式。
Eddy current testing system of carburized materials was developed by using ANSYS software as second development platform.
以通用有限元分析軟件ANSYS作為二次開發平臺，開發了面向滲碳材料的渦流測試系統。
State structure and transformation of carbides in carburized layers are analyzed by use of telescope, X-ray diffraction and energy spectrum.
通過電鏡、X射線衍射和能譜，分析了滲碳層中碳化物形態結構及轉變。
The requirement for retained austenite content in the carburized or carbonitrided case will vary with the type of product.
不同產品對殘余奧氏體量的要求量是不同的，可采用相應的熱處理工藝進行控制。
Auto or manual measurement Computer picture analvis Accurate hardness correction Hardness gradient graph of carburized or nitrided laver .
自動或手動測試，計算機圖象分析，軟件硬度精確修正，滲碳層，氮化層梯度圖示。
Overseas studies on carburized high temperature bearing steels has been summarized in the paper.
概述了國外滲碳型高溫軸承鋼的研究情況。
Warring States Shihai mastered solid block of iron carburized steel quenching methods and techniques.
戰國時還掌握了塊煉鐵固態滲碳制鋼的方法和淬火技術。
the term green refers to turned product that has not yet been carburized nor hardened.
毛坯的定義是車加工成的產品但還沒有進行滲碳或者硬化處理。
High carburized rate was attained by using Al 2O 3 fluidized bed furnace.
剛玉流動粒子爐滲碳能夠獲得較高的滲碳速度。
These are useful for the studies and applications of carburized high temperature bearing steels in our country.
為國內開展滲碳型高溫軸承鋼的研究和實際應用提供有益的參考。
The Preparation for the Carburized Quenching and Tempering Process of the Long Slide Plate
長滑板件的滲碳淬回火工藝的編制
Numeric Simulation of the Electromagnetic Characteristics in a Carburized Layer
滲碳層電磁特性的數值模擬
State of Process and Development Trend of Automobile Carburized Gear-used Steel and Heat Treatment Technology
汽車滲碳齒輪用鋼及熱處理工藝的現狀和發展趨勢
Sintered ferrous materials, carburized or carbonitrided - Determination and verification of case-hardening depth by a micro-hardness test
燒結鐵類材料.滲碳或碳氮共滲.用微型硬度測試法測定和驗證外層淬火的深度
Technical Approaches of Improving Carburized-case Depth Distribution and Microstructure for Gears
直齒輪滲碳層厚度分布與組織改善技術途徑
Control and Determination of Retained Austenite Content in Carburized and Quenched Alloy Structural Steels
合金結構鋼滲碳淬火后滲層殘余奧氏體的控制
Investigation on carburized predecessor matrix of gradient cemented carbide
梯度硬質合金滲碳前驅體的研究
Technological measures of controlling grinding fracture on carburized gears
控制滲碳齒輪磨齒裂紋的工藝措施
The Influence of Isothermal Normalizing on the Distortion of Automotive Gears Carburized and Quenched
等溫正火對汽車齒輪滲碳淬火變形的影響
A Simple Real-time Emulation for Concentration Gradient in Carburized Layer
滲碳濃度梯度的簡潔實時仿真
Study on the Preparatory Heat Treatment Technology about Two Type Material of Automobile Carburized Gear
兩種汽車滲碳齒輪新材料的預備熱處理工藝探討
Surface-to-surface contact analysis of sliding bearing for roller bit with carburized layer and copper alloy strips
含滲碳層和銅合金牙輪鉆頭軸承的面接觸分析
Calculation of Induction Voltage for Eddy Current Testing of the Carburized Depth
渦流檢測滲碳層深度的感應電壓計算
Numerical Simulation System of Carbon Concentration Distribution in Carburized Layer of the Usual Carburized Materials
常用滲碳材料滲層碳濃度分布數值模擬系統
Carburized Characteristics and Mechanical Properties of Novel Microdistortion Gear Steel
新型微變形齒輪鋼滲碳特性及力學性能
Pasty Carburizing Technology and the Effect of Post-Carburization Heat Treatment on Wear-Resistance of the Carburized Layer
膏劑滲碳工藝及滲后熱處理對其滲層耐磨性的影響
Microstructure and Properties of Carburized Bevel Gear by BH Energizing Technology
BH催滲技術對滲碳螺旋傘齒輪組織和性能的影響
Influences of Heat Treating Process on Bending Fatigue Strength of Carburized Gears
熱處理工藝對滲碳淬火鋼齒輪彎曲疲勞強度的影響
Contact fatigue strength comparison of laser-hardened gear and carburized gear
激光淬火齒輪與滲碳淬火齒輪的接觸疲勞強度對比實驗研究
Friction and Wear Behavior of Double Glow Plasma No-Hydrogen Carburized Layer on Titanium Alloy
鈦合金表面雙層輝光離子無氫滲碳層摩擦磨損性能研究
Methods of Preventing Tooth Grinding Cracks for Carburized Hardened Gear
滲碳淬火齒輪磨削裂紋的防止
Failure Analysis of the Breaking of Reducing Carburized Gear
減速器滲碳齒輪斷裂失效分析
Study on Surface Residual Stress of Carburized and Quenched Automobile Gears
熱處理和磨削工藝對滲碳淬火汽車齒輪殘余應力的影響
Analysis on Distortion of Rear-axle's Passive Gears Carburized and Hardened
后橋從動錐齒輪滲碳淬火的變形分析
