cross-cut

cross-cut

 英

  • n.電視圖象的交叉消隱;電視圖像的交叉消隱
  • 網絡橫切;石門;交叉剪接

英漢解釋

n.
1.
電視圖象的交叉消隱
2.
電視圖像的交叉消隱

例句

So he made a surprising decision: he decided to cross cut piece.

于是作出一個驚人決定決定十字架一塊

The ridge along to tip not only firms the body, but also forms a cross cut which is not easy to recover.

延伸不僅強固而且這樣穿刺形成字形傷口容易復員

Therefore, expansion energy in initial released gas is the best index of outburst forecast when a cross-cut is uncovered in Majiagou mine.

因此預測馬家溝突出最好指標初始釋放瓦斯膨脹

Try to install the cross-cut pedestal and foam pedestal which were made by ourselves before for improving the material loose.

盡力安裝調試先前我們制作橫切底板泡沫底板改善材料

The static and dynamic characteristics of the taper-flat and cross-cut slider are comparatively studied in the course of track seeking.

對比研究平面磁頭磁頭定位過程靜態動態浮動特性

The technology process of a board cross-cut-off saws introduced and the control difficulty is analyzed.

介紹木板鋸鋸工藝流程分析控制難點

But what about other non-business-specific concerns that cross-cut through the hierarchy of classes?

其他橫切層次結構業務特定關注點如何實現

Wash and cut large straw mushrooms into halves. Make a cross cut on the stalks of small ones.

草菇洗凈切開一十

Can you please confirm any additional costs to reinforce for both the vein-cut and cross-cut stone in honed and polished finishes.

確定一下材料拋光進行強化處理需要費用

May: Food and Cultivated Systems Cross Cut Washington DC, USA (IFPRI).

5月:糧食耕作系統綜合會議美國華盛頓特區國際糧食政策研究所-IFPRI)。

Apply the tape test defined in test method B, cross-cut tape test of test methods D3359, eliminating parallel cuts.

個人理解測試需要平行線測試),直接膠布

Engineer cold chisels and cross-cut chisels.

機械鑿子

Application of grey relevancy analysis method in index optimization of outburst forecast when a cross-cut is uncovered

關聯方法石門突出預測指標優選應用

Safety of woodworking machines - Circular sawing machines - Single blade automatic and semi-automatic up-cutting cross-cut sawing machines

木工機械安全.圓盤鋸床.自動半自動橫切鋸床

Study on proper layout parameters of the gas drainage drills of outburst prevention in rock cross-cut coal uncovering

石門抽放瓦斯鉆孔合理布置參數研究

Safety of woodworking machines - Circular sawing machines - Pendulum cross-cut sawing machines

木工機械安全.圓盤鋸床.擺動橫切鋸床

Cross-cut Coal Uncovering Technology in Flat, Unstable, "Three-soft" and Outburst Coal Seam Under Slide Tectonics

滑動構造不穩定水平突出煤層石門方法

Preventing Coal and Gas Outburst when Cross-cut Uncovered by Injecting Reinforcement Technology

采用漿加固技術防止石門瓦斯突出

District cross-cut convergence regularity caused by over-the-roadway extraction in deep colliery

深井石門變形規律

Safety of woodworking machines - Circular sawing machines - Part 12: Pendulum cross-cut sawing machines

木工機械安全第12部分

Investigations on the Compatibility of Ordinary Cement and Water Reducer by Using Cross-cut Testing

利用正交試驗方法研究普通硅酸鹽水泥高效水劑相容性

Cross cut test. Adherence determination of organic coatings;

橫切測試有機涂料測定

Economic analysis on over pass cross-cut mining of fully mechanized longwall mining face

工作面石門回采經濟分析

A Note on the Dimension of the Bivariate Spline Space for Cross-Cut Partition

貫穿空間注記

Furniture--Assessment of adhesion of surface coatings--Cross cut

家具表面附著力交叉切割測定

Study on Index of Outburst Forecast when a Cross-cut is Uncovered

石門突出預測指標試驗研究

Confirming Least Rock Pillar Thickness in Cross-cut Coal Uncovering

石門最小預留厚度確定

Strata pressure and supporting of cross-cut when mining face overpassed

工作面石門支護

Pillar Mining of Rock Cross - cut with Pseudo - sloping Flexible Shield

傾斜柔性掩護支架開采石門

Study of Occur of Outburst Rock cross-cut coal

石門發生突出危險性研究

Research on Improving the Reliabilities of Blasting Network in Uncovering Coal Seam in Cross-cut

提高石門爆破網絡起爆可靠性研究

Experiment of Gas Pre-extraction by Using Large Diameter Cross Drilling in Cross Cut

直徑交叉鉆孔瓦斯石門試驗

Determination of adhesion of films and cross cut test for films

附著力測定試驗

Paints and varnishes Cross cut test for films

清漆試驗

Analysis of Occur of Outburst in Majiagou Coal Mine Rock cross-cut coal

馬家溝煤礦石門發生突出危險性分析

Testing method for cross cut of film of paints

試驗

Two cross cut nipples with card

十字奶嘴

Positive edge of cross cut

Proper Way to Slit or Cross-Cut Paper Web and the Cutter Choice

縱橫正確方式刀具選擇