nitriding
美 ['na?tra?d??] 
英 ['na?tra?d??]
英漢解釋
例句
The surface coating of titanium coating, coating, coating, nitriding, chromium nitride coating.
本色，鍍鈦涂層，氮化涂層，氮化鉻涂層。
The paper makes a primary approach to a two big problems on the long period and the heavy brittleness resulting from gas nitriding process.
針對氣體滲氮工藝存在的周期長和脆性大兩個問題進行了初步的探討。
The relatively low temperature of the nitriding process produces components with a scale free surface, and minimum distortion.
相對較低溫度的滲氮工序使得組件表面得以實現自由表面以及最低畸變的。
Iron nitride was obtained by the mixing technology with laser and plasma beams nitriding coaxially on the surface of iron in atmosphere.
采用激光和氮等離子體混合方法在大氣氣氛下對鐵樣品表面進行處理，獲得了鐵氮化合物表層。
The article introduces the structure feature and heat treatment technology of a low vacuum nitriding furnace for treating axle work pieces.
本文介紹了處理細長軸件的低真空氮化爐的結構特點和熱處理工藝。
The heat treatment technology of carbo - nitriding of steel has the characteristic of lower treatment temperature and direct quenching.
鋼的碳氮共滲熱處理工藝具有共滲溫度低、可直接淬火等特點。
However, nitriding is a relatively expensive process and is used only if other processes do not produce satisfactory results.
然而，滲氮是一種相對較昂貴的熱處理方法，并且通常只在其它熱處理方法無法滿足要求時才會使用。
Nitrogen has greater hardening ability with certain elements than with others, hence, special nitriding alloy steels have been developed.
氮與某些元素的硬化能力比其它元素大，因此開發了專用的滲氮合金鋼。
and the nitriding atmosphere is ammonia and propane gas or other gas or liquid which can generate nitrogen atoms and carbon atoms.
滲氮氛圍為氨氣和丙烷氣或是其它可以產生氮原子和碳原子的氣體或液體。
The vickers hardness and nitriding surface fulfill requirements, and also improves the machining quality of the products.
主軸錐孔的維氏硬度和氮層深度均達到要求，提高了產品的加工質量。
Therefore the current process must be improved for upgrading the first percent of pass for soft-nitriding heat treatment.
為此就須改進現有工藝，提高軟氮化熱處理的一次合格率。
Research on the dielectric barrier discharge nitrogen nitriding at atmospheric pressure have consumedly progressed.
利用介質阻擋放電進行常壓氮氣滲氮研究取得突破性進展。
Using dielectric barrier discharge (DBD) effect, atmospheric pressure non equilibrium plasma nitriding is carried on at self made equipment.
利用介質阻擋放電原理，在自行研制的設備上進行了常壓非平衡等離子體滲氮。
Reducing discharge interval and increasing electric field intensity could increase the hardness and depth of nitriding layer markedly.
在本工藝條件下，適當減小放電間隙，增大電場強度，可以明顯提高滲層的硬度和深度。
This paper introduces the research and development of manufacture technique of high strength nitriding gear used in gearbox.
本文介紹了用于變速器的高強度滲氮齒輪制造技術的開發與研究工作。
Nitriding steels, by virtue of their alloying content, are stronger than ordinary steels and respond readily to heat treatment.
由于滲氮鋼的合金比例，它們比普通鋼更強，也容易熱處理。
To increase production capacity of nitriding ferroalloys, reducing production cost, PSA nitrogen plant is selected.
提高氮化合金的生產能力，降低生產成本，采用了PSA制氮系統。
QPQ technology is a surface treatment technology which consists essentially of liquid nitriding and liquid oxidizing.
QPQ技術是一種主要包括鹽浴滲氮和鹽浴氧化的表面處理技術。
The gas nitriding technology of H13 steel was studied by an orthogonal test.
運用正交試驗法，研究H13鋼氣體滲氮工藝。
Nitriding steels - Technical delivery conditions.
氮化鋼.交貨技術條件
For problems in which corrosion resistant surfaces are desirable, nitriding is the process most often used.
對于表面有抗腐蝕性要求的齒輪，滲氮是最常用的方法。
Gears are the nitriding process, high hardness and resistance, and the shaft installed in the collar with.
齒輪均經氮化處理，有較高的硬度和耐磨性，與軸一同安裝在軸套內。
and after the ionic nitriding, finally performing polishing or super-grinding on the working surface to process a finished product.
離子氮化后，最后對工作表面進行拋光或超精磨加工，加工出成品；
A versatile surface alloying technique , the Xu-TEC or XU- LOY process has been developed on the basis of the plasma Nitriding.
雙層輝光離子滲金屬技術是在離子氮化基礎上發展的表面冶金技術。
Also, the stainless steel ion nitriding, low carbon steel ion nitriding, nitrogen oxides more prominent role.
另外，對不銹鋼離子氮化、低碳鋼離子氮化、氧氮化作用更加突出。
The relationship of nitriding results with different nitrogen plasma fluxes was discussed.
討論了氮等離子體流量對混合法氮化效果的影響。
Laser pulses melt the metal surfaces and activate nitrogen, inducing nitriding reaction in liquid phase.
激光的作用使得金屬表面熔化和氮氣激活，導致液相氮化反應；
The plasma nitriding will improve on surface hardness and wear resistance of the piston ring.
活塞環經過等離子滲氮處理，提高了活塞環的表面硬度和耐磨性。
By using medium to stop discharging, the non-equilibrium plasma nitriding under normal pressure can be made in self developed equipment.
利用介質阻擋放電，在自行研制的設備上進行常壓非平衡等離子體滲氮的研究。
Liquid nitriding utilizes molten cyanide salts and, as in gas nitriding, the temperature is held below the transformation range.
液體滲氮利用熔化的氰化物鹽，就像氣體滲氮，溫度保持在低于轉化范圍內。
Optimum polishability and photo etching properties suited for nitriding, hard chromium plating &PVD coating.
拋光性能和光蝕性能甚佳，適合氮化，鍍硬鉻和物理氣相承繼等。
Nitriding Gears as an Alternative to Case Hardening?
氮化齒輪能代替滲碳淬火齒輪嗎？。
Plasma nitriding has the advantage that it is easy to stop the process, in contrast to gas nitriding and especially to salt bath nitriding.
血漿氮化物有利益中止程序很容易，與氮化物的瓦斯相反和特別加鹽于沭浴氮化物。
Barrel screw adopts the high quality alloy 38CrMoALA, after nitriding process, the hardness and corrosion resistance.
機筒螺桿采用優質合金鋼38CrMoAL，經氮化處理，具有最佳的硬度和腐蝕性能。
This article has elaborated the equipment, process of plasma nitriding for piston ring and the examination way of nitrided layer.
闡述了活塞環等離子滲氮設備、工藝及滲氮層的檢測方法。
The liquid nitrogen and liquid workpiece direct conduction heating, shortened the workpiece heating time and improve the speed of nitriding.
液體氮化由于液體與工件直接傳導加熱，縮短了工件加熱時間，提高了滲氮速度。
In general the uses of the two-nitriding processes are similar.
一般而言兩種滲氮方法的用途是類似的。
Nitriding in new salt baths reduced the treatment cost by 30% as compared to the process in the old cyanide- base baths.
與過去以氰化物為主的鹽浴相比，新鹽浴所采用的氮化法減少了30%的處理成本。
So the testing nitriding quality becomes very important.
因而，檢驗鏜軸的氮化質量十分重要。
Titanium alloy material (TC4) samples were treated with nitriding technique.
牙用鈦合金TC4，使用滲氮表面技術處理。
