stepper
美 ['step?] 
英 ['step?]
- n.步態好的人[馬]；時間全花在社交上的大學生；【體】跑者
- 網絡步進；步進機；踏步機
英漢解釋
例句
Traditional gravure press through the stepper motor driven compensation roll change the length of the implementation of positive way.
古板癟印機堵住步進馬達驅動賠償輥保持紙路不幼度達成套準。
The structure and operation principle of a PM spherical stepper motor and its gimbal guideway orientation detection system were discussed.
介紹了一種永磁球形步進電動機的結構、工作原理及滑軌支架形式的位置檢測系統。
The structure and operation principle of a PM spherical stepper motor are discussed and its configuration parameters are analyzed.
介紹了一種新型永磁球形步進電動機的結構、工作原理，對電機的結構參數進行了深入分析。
Stepper motor, also known as pulse motor, is a pulse, will be transformed into angular displacement of the implementation of components.
步進電機又稱為脈沖電動機，是一種將電脈沖轉化為角位移的執行元件。
Once stopped, the stepper motor resists dynamic movement up to the value of the holding torque.
一旦停止，步進電機抵制動態的運動物體的價值持有扭矩。
It is possible to drive unipolar stepper motors with bipolar drivers.
使用多極驅動器可以驅動單極步進馬達。
Therefore, it will have great significance to use drives and controllers of good performance in stepper motor control system.
因此，對于步進電機控制系統而言，使用性能良好的驅動器和控制器具有重要意義。
Stepper motor is an electrical pulse into the angular displacement of the implementing agencies.
步進電機是一種將電脈沖轉化為角位移的執行機構。
The stepper and the treadmill on incline are great cardio to lose weight all over while still building some muscle tone on the legs.
在安裝在斜板上的步進器及踏旋器上進行心力鍛煉不僅能減輕全身體重還能增強腿部肌肉緊張度。
It provides stepper motor control of up to 3 axis using the printer port of an IBM style personal computer.
它提供步進電機控制達3軸使用的打印機端口的IBM個人電腦的風格。
Fig. F: Simple transistor circuit boosts clock pulse up to 5V. for driving a stepper motor or Interfacing with other 5V-based electronics.
圖F：簡單的晶體管電路將計時脈沖放大到5V，以驅動步進電機或與其它需要5V電壓的電子設備連接。
Stepper motor can be divided into reactive stepping motor, permanent magnet stepper motors and hybrid stepper motor.
步進電機可分為反應式步進電機、永磁式步進電機和混合式步進電機。
Examples include a numerical stepper, a slider control, an inline data grid component, and a menu bar.
比如包括一個數字步進，滑動控制，一個軸向數據網格要素和菜單欄。
Permanent magnet synchronous motor uses rotor flux oriented vector control technology and stepper motor uses subdivision control technology.
永磁同步電機采用轉子磁場定向矢量控制技術，步進電機采用細分控制技術。
Although feedback is not usually required, stepper motors are compatible with feedback signals, either analog or digital.
盡管通常不需要反饋，但步進電機可以和反饋信號兼容，不管是模擬信號還是數字信號。
Using 89C52 as a node of the stepper motor, this controller realized the communication between controller and host computer through CAN bus.
該控制器用89C52單片機構成一個步進電動機控制節點，用CAN總線實現控制器和上位機的通信。
On the stepper motor stator windings are usually equipped with multi-phase, with the rotor teeth is the core or permanent magnet.
步進電機的定子上通常裝有多相繞組，轉子是帶齒的鐵心或是永久磁鐵。
This invention discloses a stepper motor, and the connecting device and installation method of its shell and the installation plate.
本發明公開了一種步進馬達及其外殼與安裝板的聯接裝置及其安裝方法。
A second stepper motor control FMI valveless pump, for regulating the injection of feed speed and frequency of injection material.
第二個步進電機控制FMI無閥泵，用于調節進給速度和頻率注射注射材料。
The servo components of the locating system are composed of current adapter, generate masters, step drivers, and stepper motors.
定位系統的伺服組件由轉換器、主控器、驅動器及步進電機構成。
Firstly the system designs a new stepper acceleration and deceleration algorithm to control the stepper motor based on its features.
首先本系統針對步進電機運行的特點，全新設計了步進電機加減速算法。
cascade in which a stepper motor pump head by changing the angle to increase or decrease the pump stroke, thereby regulating the flow.
級聯中的步進電機通過改變角度，增加或減少中風的泵泵頭，從而調節流量。
Variable reluctance machines: Switched reluctance, Stepper.
變阻抗電機：開關磁阻電機，步進電機。
in order to reduce production costs , the stepper motor is applied to let - off controller instead of the import ac servomotor.
為了降低成本，運用步進電機代替原進口伺服電機進行張力控制。
Finally, a flowchart and software setup for stall detection of a stepper motor was given.
最后還給出了如何利用該模塊進行步進電動機停轉檢測的程序流程圖和相關程序。
Most stepper used in the design or independent pedal, more like to use elliptical machines in the foot.
大多數踏步機采用的還是獨立踏板設計，使用起來更像是在踩橢圓機。
When the desired position is reached and command pulses cease, the stepper motor shaft stops and there is no need for clutches or brakes.
當所需的位置，就會命令脈沖停止，步進電機軸停止，也不需要離合器和制動器。
Computer and Communication issued SCM pulse of the stepper motor control start, stop and shoot the four-run double four shoot.
計算機與單片機通信發出脈沖信號控制步進電機的啟動、停止及單四拍雙四拍運行。
Using CP pulse and direction signal from 89C52 to control the stepping and sipping of stepper motor, precise wire arranging can be realized.
精密排線是通過單片機輸出的CP脈沖和方向信號，準確控制步進電機的步進、跳段等工作狀態來實現的。
Motion control system is mainly composed of stepper motor, control circuitry, digital control and control of key components.
運動控制系統主要由步進電機、控制電路、數碼管和控制鍵組成。
Load must be analyzed carefully for optimum stepper motor performance.
負載必須仔細分析步進電機性能最優。
flow regulation through two independently controlled stepper motor with ingenious realize.
流經兩個獨立控制的巧妙實現步進電機調節。
To achieve full rated torque, the coils in a stepper motor must reach their full rated current during each step.
要達到完全額定扭矩，步進馬達里的線圈必須在每一步達到完全額定電流。
the automatic control of air-blower run phase is achieved by stepper motor controlling the rotating angle of blind mesh accommodated unit.
通過步進電機控制可調百葉窗式網柵調節裝置的旋轉角度，實現了風機運行工況的自動控制。
household appliances, office equipment used in AC motor and stepper motor.
家用電器、辦公設備用的交流電機和步進電機。
By-pass air flow rate was controlled by a stepper motor, and the PID algorithm was adopted to adjust the idle speed in closed-loop.
通過控制怠速步進電機以調節旁通空氣量，采用PID算法對發動機怠速轉速進行閉環控制；
Acting countries in the world brand PLC, inverter, touch-frequency, servers, stepping motors, stepper drives, and industrial products.
代理世界各國品牌的PLC、變頻器、觸摸頻、伺服器、步進馬達、步進驅動器、和工控產品。
The design ideas through the computer and communications to achieve the SCM stepper motor control.
該設計的思路是通過計算機與單片機通信實現對步進電機進行控制。
Stepper motors are used in floppy disk drives, flat bed scanners, printers, plotters and many more devices.
步進馬達用于軟驅、平板式掃描儀、打印機、繪圖儀等多種設備。
High-subdivision stepper motor driver, low noise, high running precision, and movement smoothly.
高細分步進電機采用高細分驅動器，噪音低、精度高、運行平穩。
