PMAC
美 
英
- n.賽力散
- 網絡管理協會；多軸運動控制器；Program Multiple Axises Controller
英漢解釋
例句
It is proved that this system can realize the customizing Man-Machine-Interface and the parameterization of Real-Time-Component in practice.
實踐證明，基于PMAC的數控系統完全可以實現人機接口的定制和實時控制部件的參數化。
Methods: The phosphorylated proteins from human kidney tissues were enriched with phosphate metal affinity chromatography (PMAC) resin.
方法：利用金屬磷酸鹽親和層析樹脂富集人腎組織磷酸化蛋白。
In the end, the PMAC PID control tuning curves illuminate the eximious properties of the system.
最后根據電機的整定曲線，說明系統的優良性能。
Open architecture composed of PC and PMAC is adopted for the system hardware, which is a parallel double-CPU NC system.
系統硬件采用開放式結構，由“工控PC機+運動控制卡PMAC”構成，是一種并行雙CPU數控系統。
Please forward completed application and payment to your local PMAC agency.
請將申請表及認證費用交到。
The high - speed feed drive unit and electric spindle of machine tool are controlled by open controller PMAC.
用開放式控制器PMAC對機床高速進給單元及電主軸進行控制，并以此集成了一套磨床數控系統。
High-level language used for the preparation of VC 6. 0, based on the dynamic link library to write applications Pmac. dll module.
研究PMAC多軸運動控制器，開發數控系統應用軟件。采用高級語言VC6.0進行編寫，基于動態鏈接庫Pmac.dll編寫應用程序模塊。
An open architecture numerical control of engraving and milling machine tool system is developed based on PC and PMAC motion control.
基于PC+PMAC運動控制器開發了開放式數控雕銑機系統，介紹了該系統軟硬件組成和實現方法。
In this paper , an actual method is made to fulfil high - speed precision grinding of elliptic parts based on PMAC time - based control .
文章就實現橢圓形零件的高速高精密磨削的問題，提出了采用PMAC時基控制的實驗方法。
This paper discusses a NC system for quadrate pipe cutting machine based on PMAC and describes its hardware and software designs in detail.
開發一種基于PMAC運動控制卡的數控方管切割機控制系統，并對它的硬件設計和軟件結構做了詳細的論述。
Fourth chapters have introduced that servo system and the parametric adjustment of PID with use of PMAC card.
第四章介紹了切割機伺服系統及基于PMAC卡的PID參數的整定。
According to the current situation of domestic spring machine, the CNC system for spring machine based on PMAC was designed.
針對國產卷簧機技術現狀，設計了一種基于PMAC卡的卷簧機數控系統。
PMAC motion control card as its core in detail.
PMAC的議案，其詳細的核心控制卡。
Precise Orientation of the Moving Table of Equipment Used for Grinding Ball Nose-End Milling Based on PMAC
基于PMAC的球頭立銑刀刃磨設備運動平臺的精確定位
Research of PMAC -based open NC system for the horizontal twin spindles double column drill press
基于PMAC的開放式雙主軸龍門鉆床數控系統研究
CNC System with PMAC-based Motion Controller for the Aluminous-Winding Machine
基于PMAC多軸運動控制器的自動鋁帶繞片機數控系統設計
Design of PMAC-based control system for the color matching and liquid dropping machine
基于PMAC的配色滴液機控制系統設計
Manipulative system for magnetic levitation micro feed mechanism via PMAC
基于PMAC的磁懸浮微進給機構的控制
Application of PMAC Time-base Control in Computer Control Filament Winding Machine
PMAC時基控制在計算機控制纏繞機中的應用
Application of NC System with PMAC-based Motion Controller to Thread Grinding Machine Tool
基于PMAC的數控系統在螺紋磨削中的應用
Some Key Techniques of the Control System on Ultrasonic Testing Instrument by Automation Scanning for Rotator Based on PMAC
基于PMAC的回轉體自動掃查超聲檢測儀控制系統關鍵技術
The Integrative Control of Laser Power and Powder Base on PMAC Laser Numerical Control System
基于PMAC數控激光加工系統光粉一體化控制
Realization and Application of PMAC Control Program in Dual-axes Motion Platform
PMAC控制程序在雙軸運動平臺中的實現
Research on application of the spline motion mode in PMAC controller
PMAC運動控制器樣條運動模式的應用分析研究
The Principle of PMAC Cubic Spline and Its Application
PMAC三次插補樣條曲線的原理與應用
Research on PMAC-Based Motion Control Technology for Parallel Machine Tool
基于PMAC的并聯機床運動控制技術研究
Research on Open-architecture NC System Based on PMAC and Its Application in Automatic Sealing Robot
基于PMAC的開放式數控系統在全自動打膠機中的應用
Application of the PMAC in Control of Servo Proportional Value
PMAC運動控制器在控制伺服比例閥中的應用
A Study of Turbo PMAC'S open characters for NC system of complex motion
面向復雜運動數控系統的開放特性研究
The Research on Open-architecture CNC System with PMAC-base Motion Controller
基于PMAC運動控制器的開放式數控系統研究
Study on Communication design for MCU Controlled Pulse Generator with PC and PMAC
新型數字脈沖電源與PC機及PMAC的通信方法研究
Developing of Hydraulic CNC System with PMAC-base Motion Controller
基于PMAC運動控制器下液壓數控系統的研制
Research on PMAC -based Three -axis Ocean Wave Simulation Turntable
基于PMAC的三軸海浪模擬搖擺臺設計
Study on PMAC-Based Control System for Electro-discharge Machining Tool
基于PMAC的電火花成形加工機床控制系統研究
The Research and Development on CNC System with PMAC-Base Motion Controller
基于PMAC運動控制器的數控系統開發研究
Flight simulator; Hardware-In-the-Loop; servo system; PMAC; Air Cannon;
飛行模擬轉臺；半實物仿真；伺服系統；PMAC；空氣炮；
PMAC-based open architecture arc-welding robot control system
基于PMAC的開放式弧焊機器人控制系統
The application of Panasonic's AC servo system and PMAC control block in robots
松下交流伺服系統與PMAC控制卡在機器人中的應用
The application of PMAC on induction heating control system
PMAC卡在感應加熱控制系統中的應用實例
Application of PMAC Time-base Method in Grinding of Elliptic Parts
PMAC時基控制在橢圓形零件磨削加工中的應用
