VIAS

VIAS

美 　英

• 網絡過孔；通孔；過孔或貫穿孔

例句

Every ground connections should have its own via, do not share vias if possible.

每個地走線都應有自己的過孔，過孔不能共用。

Alternatively holographic mask or an array of micro lenses may be used to focus the laser beams to the vias to fill them with metal.

另外全息面具或者微透鏡陣列，可用于集中的激光束的孔，以填補他們的金屬。

Experimental results show that, it is necessary to optimize timing directly instead of merely controlling the amount of vias and couplings.

實驗結果表明：該算法比只控制通孔和耦合電容數量的層分配策略具有更大的優勢。

The vertical metal walls of the waveguide resonators are realized by closely spaced metal filled vias .

矩形波導共振腔的垂直金屬壁是以金屬連通柱列來等效。

The pads and vias of the sacrificial circuit substrate are placed (64) in vertical proximity to the excess solder of the circuit substrate.

該犧牲電路基板的焊盤和孔與該電路基板的多余焊料垂直接近地放置（64）。

The problem was solved by preparing the boards where the vias were filled before mounting the components.

這個問題是解決了籌備委員會的通孔在安裝之前，已填補的組成部分。

All of the shield components are "stitched" together at regular intervals using vias.

所有的盾成份都在固定的間隔一起是“一針”使用經由。

Attempting to clean out the vias can result in damage to the via, solder mask or PCB.

而試圖將焊料吸出通孔，又可能導致通孔、焊接掩膜或PCB的損壞。

EPBGA model consists of seven parts, they are heat spreader, molding compound, chip, substrate, thermal vias , solder ball and PCB board.

EPBGA構裝體由七個部分所組成，分別為散熱板、成形樹脂、晶片、基板、熱通孔、錫球及印刷電路板。

vias, along the edges of the guard trace.

焊、的邊緣守衛的痕跡。

Themal reliefs are sometimes also used on vias very near, or in, pads of SMT components for the same reason.

基于同樣的原因，限熱槽也用于貼片元件內或離元件很近的焊盤。

VIAS? Voice Interference Analysis Set?

語音干擾分析裝置？。

Surface mounting on boards with vias embedded in pads.

表面安裝的板孔中嵌入墊。

Filling High-Density High Aspect Ratio Vias and High-Volume Production Setting

充填高密度高厚徑比導通孔和大量生產裝置

Modeling and Analysis of Vertical Vias in High Speed Printed Circuit Board

高速印刷電路板間垂直通孔的建模與分析

The Technology of Tin Plating In Micro Blind Vias

淺談微盲孔電鍍錫工藝控制

Plating High Aspect Ratio Blind Vias

高厚徑比盲孔電鍍