bootloader

美 　英

• 網絡引導程序；引導裝載程序；引導加載程序

例句

Generally, none of these consoles can boot Linux directly, so the assistance of an intermediary bootloader is required.

一般來說，這些控制臺都不能直接引導Linux，因此需要一個中間引導裝載程序。

Note that this only installs the bootloader, not the operating system.

請注意這只安裝了引導程序，而沒有安裝操作系統。

The bootloader is usually the first piece of code that will be executed on any hardware.

引導裝載程序通常是在任何硬件上執行的第一段代碼。

All this information is passed in parameter form from the bootloader to the kernel.

所有這些信息都以參數形式從引導裝載程序傳遞到內核。

To make your Debian GNU Linux system bootable, set up your boot loader to load the installed kernel with your new root partition.

要讓您的DebianGNULinux系統能夠啟動，還要設定您的bootloader，好讓它能已安裝的核心并用上新的根分割區。

All the BIOS really had to do was load that first chunk of code (called the bootstrap loader, or bootloader) and let the machine run.

BIOS實際上需要做的事情是加載第一段代碼（稱為引導加載程序（bootstraploader）或bootloader），并讓機器開始運行。

Once the bootloader is installed in the flash of the target , it performs all the initializations we mentioned before .

一旦將引導裝載程序安裝到目標的閃存中，它就會執行我們上面提到的所有初始化工作。

After the kernel is fully loaded to the target, the bootloader passes control to the address where the kernel was loaded.

在將內核完全裝入目標后，引導裝載程序將控制傳遞給裝入內核的地址。

Embedded Linux development broadly involves three tiers: the bootloader, the Linux kernel, and the graphical user interface (or GUI).

嵌入式Linux開發大致涉及三個層次：引導裝載程序、Linux內核和圖形用戶界面（或稱GUI）。

Before feel simple parallel port JTAG board is too slow, especially when debugging Bootloader, simply intolerable.

以前總覺得簡單的并口jtag板速度太慢，特別是調試bootloader的時候，簡直難以忍受。

After the distribution has been installed, or once done using the system utility, the modification to the bootloader is then undone.

分配后，已安裝了，還是做一次使用該系統的實用程序，該修改的開機程式，然后潑水。

The boot loader loads your kernel for you, regardless of filesystem.

Bootloader可以文件系統無關地為你裝載內核。

There are two ways to pass parameters from bootloader to kernel: parameter_structure and a tag list.

將參數從引導裝載程序傳遞到內核有兩種方法：parameter_structure和標記列表。

The bootloader communicates with the host using the serial, ESB, or ethernet port to transfer the kernel into the target's flash or DRAM.

通過使用串行、USB或以太網端口，引導裝載程序與主機通信以將內核傳送到目標的閃存或DRAM中。

Boot: Select which partition you want Grub to boot when you're installing the bootloader.

啟動：在你安裝啟動引導程序的時候要選擇你想要Grub啟動的分區。

For its bootloader, this image uses SYSLINUX, which works better with older, more outdated machines.

對于引導裝載器來說，這個映像使用了SYSLINUX，它在一些早期的機器上可以更好地工作。

This poses an interesting question: who loads the bootloader onto the embedded devices, which (in most cases) don't have BIOS?

這就提出了一個有趣的問題：誰將引導裝載程序裝入（在大多數情況中）沒有BIOS的嵌入式設備上呢？

The bootloader then needs to have some code to load the remaining bootloader code from NAND before executing itself.

引導加載程序在執行前需要一些代碼從NAND加載剩余的引導加載程序代碼。

You must study and choose from a variety of options for everything from the bootloader and distribution to the filesystem and GUI.

您必須學習并從引導裝載程序和分發版到文件系統和GUI中的每一個事物的各種選項中作出選擇。

As your boot loader the small program which runs the operating system kernel.

作為您的bootloader運行操作系統內核的小程序。

The host programs or loaders can then use this connection to transfer the bootloader onto the target, where it is written to flash.

然后，主機程序或裝入程序可以使用這個連接將引導裝載程序傳送到目標上，并將它寫入閃存。

The prompt at the end of the output is from the second-stage bootloader, waiting for instructions on how to load the operating system.

輸出末尾的提示來自第二階段引導裝載器，它等待關于如何裝載操作系統的指令。

Grand designed a static serial bootloader into the badge to allow people to load their own programs and firmware into the badge.

大徽章設計成一個靜態的串行引導，讓人民來加載自己的方案，進入徽章固件。

If the Bootloader on the Nexus One has already been unlocked, you may skip this section.

如果啟動引導程序已被解鎖，就可以跳過這一步。

If you miss the bootloader the device will not boot as there is no OS.

如果你錯過了引導程序的設備將無法啟動，因?yàn)?/c>沒有操作系統。

Once the kernel is loaded, the bootloader transfers control to the kernel.

一旦裝入了內核，引導裝載程序就將控制轉給內核。

The first step of the installation is to install a new bootloader.

安裝的第一個步驟是安裝一個新的引導加載器（bootloader）。

Once all is done you just need to reboot your Mac and select 'Linux' from the REFit bootloader when it appears.

所有都完成后，你只需要重啟你的Mac，從REFit引導工具中選擇“Linux”。

In this paper, the Bootloader in DSP system and the flash ROM operation method are introduced.

介紹DSP系統對FLASH存儲器的操作方法和用戶程序引導；

The Beagle Board's firmware contains a first-stage bootloader called X-loader.

BeagleBoard的固件包含一個名為X-loader的第一階段引導裝載器。

WARNING: UNLOCKING THE NEXUS ONE'S BOOTLOADER WILL VOID THE WARRANTY.

解鎖啟動引導程序將導致你的保修無效。

Knowing how to install the Grub bootloader onto your main hard drive can get you out of all sorts of tricky problems.

知道如何在你的主硬盤安裝Grub啟動引導程序將會擺脫各種難纏的問題。

There is a big difference between the implementation of dual core processor's bootloader and one core processor's bootloader.

雙核啟動加載器程序的實現方法與單核啟動加載器程序的實現方法有較大的差異。

If you want to fix it, you should first put grub on the external drive, then put Windows' bootloader back on the internal drive.

如果你要解決這個問題，你應該首先把grub移入外部硬盤，接著恢復內部硬盤中的Windows啟動加載器。

First, make sure that the bootloader configuration has entries for both the new kernel and the old, working 2. 4 Kernel.

首先，確保啟動程序可以新內核和舊內核（2.4內核）啟動。

Most simply, a boot loader loads the operating system.

最簡單地講，引導加載程序（bootloader）會引導操作系統。

To install the bootloader, you first need to transfer these files to the iPAQ.

要安裝引導加載器，您首先需要將這些文件傳輸到iPAQ上。

If you are stucked in bootloader or in windows screen, this will not work!

如果你是在引導stucked或Windows屏幕，這將無法正常工作！

The specific framebuffer video mode at boot time is set by parameters passed to the kernel by the bootloader, kboot.

這個引導時特定的framebuffer視頻模式可以通過引導啟動程序kboot傳遞給內核的參數進行設置。

It will unlock 1. 1. 2 firmware with the new 4. 06 bootloader .

這個卡貼采用新的4.06引導裝入系統可以給1.1.2版本的固件解鎖。