cold-end

cold-end

 英

  • n.冷端

英漢解釋

n.
1.
冷端

例句

So when the air pushes up to go from the hot end to the cold end it puts some heat into the sponge.

空氣流向抬高活塞一部分儲存儲存

The cold end is formed by cutting two longitudinal slots along the length of the tube.

沿著方向縱向

Better adhesion of the cold end coating at the surface of the products achievable.

產品進行噴涂提供較好附著力

Finally, as a cold end optimization of transformation shown, verifying the theory of multi-speed cross-parallel scientific and effective.

最后電廠優化改造驗證交叉并聯理論科學性有效性

The cold end of the SER element is flame sprayed with aluminum for a distance of about two inches.

進行保持大約英寸距離

They won't be far apart, the pair of them, out there in the glacier. An ice-cold end to their love affair.

他們之間不會情人冰川真是一個愛情故事冰冷結局

So the determination of flue gas dew point will become the main basis of resolving the issues of the cold-end corrosion and ash blocking.

因此確定煙氣露點便成為解決低溫腐蝕問題主要依據

By the use of temperature characteristic of the semiconductor PN junction thermocouple cold end compensating circuit was designed.

利用晶體管PN溫度特性設計熱電偶補償電路常用熱電偶補償方法進行比較分析

A new method named 'the reference value diagnosis method is put forward for evaluating the operation economics of the cold-end system.

針對現有系統經濟診斷不足提出一種診斷方法———基準診斷方法

The displacer piston now moves, shunting the gas to the cold end of the cylinder.

活塞置換現在動作調冷戰結束

The circulation water subsystem is an important part of the cold-end system.

循環系統系統重要組成部分

The results show that the cooling tower, that's performance is very important for the economic of the cold end system.

分析結果表明——冷卻性能對于系統經濟重要影響

The restriction on the temperature relates to the terminal or cold end portion of the Element.

對于溫度限制主要歸因于產品或者終端

The COP can also be increased if the volume ratio of cold-end reservoir to pulse tube is large enough.

如果體積大于一定制冷機效率得到顯著提高

a gap is provided between the hot end and the cold end.

冷端之間設有間隙

Finally, problems about optimizing cold end temperature in order to control the frost heave are discussed.

最后凍結模式優化設計控制技術問題進行進一步探討

Rational select of thermocouple cold end temperature compensation in intelligence temperature-measure system

熱電偶溫度補償方式智能測溫系統合理選擇

Study on overall cold end mathematics model of power plant and its optimization software development

火電廠系統全面數學模型研究及其優化軟件開發

Improvement of Cold- end Temperature Compensating Electric Bridge in Thermocouple Measurement

熱電偶測溫溫度補償電橋改進

Transformation of Cold-End Coating Equipment and Its Application

噴涂設備改造應用

Development and Application of Longitudinal Cut Device at Cold End of Float line

浮法設備——裝置應用開發

Cold end temperature-changing experimental research on the artificially frozen soil

溫度人工凍土凍結試驗研究

Cold End Compensating to General Thermocouples Based on Temperature Characteristic of the Semiconductor PN Junction

基于晶體管PN溫度特性熱電偶補償

Thermocouple Cold-End Temperature Compensation and the Nonlinear Data-Processing

智能測溫系統熱電偶溫度補償非線性處理

Arrangement of Cold End of the Superthin Glass Production line

玻璃生產線布置

Study on Thermo-Economics Diagnosis Method for Cold-End System in Steam Power Unit

系統運行經濟診斷方法理論研究

The Application of LOGO! Controller in Cold-End Coating System of Glass Bottle Production

控制器玻璃瓶生產噴涂應用

Dust treatment for cullet at cold end of float line

法線碎玻璃系統粉塵治理

Optimization for Steam Turbine Cold End System

汽輪機優化研究

Sino-Italian CTIEC (Bengbu) Glass Cold-End Machinery Company Limited

公司安全檢查整改情況中意蚌埠玻璃機械有限公司

Key Factors Affecting the Cold- end Performance of China-made 300 MW Introduced Power Unit

影響國產引進300MW機組性能主要因素

Study on the Optimal Operation Mode of Cold End System of Power Plant

發電廠系統最優運行方式研究

Stacking System of Cold End on Float Glass Line

浮法玻璃生產線堆垛系統

熱門查詢