intergranular
美 [?nt?'grænj?l?] 
英 [?nt?'grænj?l?]
- adj.晶間的；晶界的；粒間的；腦粒細胞層間的
- 網絡沿晶；間粒狀；晶界型
英漢解釋
例句
The result shows that it was the typical intergranular fracture, and there were scrappy claw and tiny pore in the fracture of crystal face.
結果表明：彈性墊圈斷口為典型的沿晶斷裂，在斷裂的晶面上有細小的爪狀紋和微孔。
For intergranular materials, poorly to moderately well cemented, the total porosity is approximately equal to the effective porosity.
對于由晶體構成的物質，其晶粒間含泥漿少或較少，因此總孔隙度與有效孔隙度近似相等。
Breakage mechanism of these pipes is tipping corrosion, accompanied with intergranular corrosion and stress corrosion cracking.
腐蝕機理一般為點蝕，往往伴隨晶間腐蝕和應力腐蝕。
The corrosion types of the cast and extruded alloys are pitting corrosion and filiform corrosion as well as intergranular corrosion.
鑄態和擠壓態鎂鈣合金主要腐蝕形態為點蝕、絲狀腐蝕和晶間腐蝕。
EXAMINATION RECORD FOR INTERGRANULAR CORROSION, HARDNESS, METALLOGRAPHY, FILLET WELD AND WELD CHEMICAL COMPOSITIONS. . . . . .
晶間腐蝕，硬度，金相，角焊縫，焊縫化學成份檢驗記錄表
And the intergranular morphology, the polygonal morphology and the fan-shaped cleavage morphology are the main fracture morphologies.
“縫隙”和“孔洞”是其斷口最主要的微觀缺陷形貌特征。
Detections of susceptibility to intergranular corrosion in stainless steel and nickel alloy pressure vessels are always gone on before now.
此前不銹鋼與鎳合金壓力容器晶間腐蝕敏感性檢驗原本就在進行著。
Failure pattern of transgranular fracture and intergranular fracture depends on the intension of crystal.
裂紋尖端晶體強度影響穿晶和繞晶的破壞模式；
The research finds that pores can be divided into three types: crude residual intergranular pore, induced pore and mixed pore.
研究發現儲層孔隙類型以原生殘余粒間孔、次生粒間孔隙和混合孔隙為特征。
The wall of the pipes is becoming thinner and thinner as intergranular corrosion occurred under the incrustation.
水垢下面的管內壁產生晶間腐蝕而減薄。
Intergranular fracture. Fracture of polycrystalline materials by crack propagation along grain boundaries.
沿晶斷裂：多晶材料裂紋沿著晶界擴展而斷裂。
Intergranular stress corrosion cracking behavior of austenitic steels on hydrogenated high-temperature.
奧氏體鋼在高溫氫化物中的晶間應力腐蝕開裂性能。
The quench sensitivity relative to intergranular corrosion increased with the increase of rolling deformation.
隨著軋制變形量的增大，合金晶間腐蝕的淬火敏感性增大。
The types of the pore are mainly secondary solution pores and seldom primary remanent intergranular pores.
孔隙類型主要為次生溶孔，偶見剩余原生粒間孔。
Effects of hydrogen peroxide on intergranular stress corrosion cracking of stainless steel. in high temperature water, .
過氧化氫對在高溫水中不銹鋼晶間應力腐蝕裂紋的影響…[中國核科技信息與經濟研究院]。
Original porosity is typified by the intergranular porosity of sandstones and the intercrystalline and politic porosity of some limestones.
原生孔隙度以砂巖粒間孔隙度和某些石灰石的晶體粒間和項狀孔隙度為代表。
Pore types are mainly intergranular pore, throat types are mainly point, plates and curved sheet throat, general pore connectivity.
孔隙類型以粒間孔為主，喉道類型以點狀、片狀和彎片狀喉道為主，連通性一般。
At the lower temperatures, intergranular thermal cracking is the main thermal cracking for Beishan granite.
在較低溫度時，北山花崗巖熱開裂以沿顆粒熱開裂為主；
The results showed that the decrease of quench rate reduced the resistance to intergranular corrosion.
實驗結果表明，淬火速率的下降會導致合金的抗晶間腐蝕能力降低；
The corrosion behavior of 2D12 alloy was evaluated including intergranular corrosion, exfoliation and stress corrosion cracking.
對不同規格2D12鋁合金進行晶間腐蝕、剝蝕和應力腐蝕性能測定。
Fracture mode is predominantly ductile in base metal. However, there exists intergranular fracture in the weld metal.
斷裂形式在母材中具有很好的延展性，但是會在焊接金屬中造成沿晶斷口。
Mitigation effect of alkaline water chemistry upon intergranular stress corrosion cracking of sensitized 304 stainless steel.
堿性水化學對強化304不銹鋼晶間應力腐蝕裂影響的降低…[中國核科技信息與經濟研究院]。
The pore space consists of intergranular dissolved pore, intragranular dissolved pore, moldic pore and fracture.
儲層的主要孔隙空間為粒間溶孔、粒內溶孔、鑄模孔和裂縫。
In addition, the steel had also better intergranular corrosion resistance after sensibilisation treatment.
該合金鋼敏化處理后，仍具有較好的抗晶間腐蝕性能。
The fracture mode of the alloy in T6 state is transgranular shearing and intergranular dimple mixed fracture.
合金T6態的斷裂方式為穿晶剪切和沿晶韌窩混合型斷裂；
The effect of holding time on intergranular phase and mechanical property of GPS silicon nitride ceramics was studied.
研究了保溫時間對氣壓燒結（GPS）氮化硅陶瓷晶界相及力學性能的影響。
The reservior space are mainly intergranular apricot kernel inner pore and dissolved pore.
儲集空間類型主要有粒間孔、杏仁體內孔和溶蝕孔。
There is mainly intergranular corrosion with different extent on Cu-Ni alloys in marine.
各海域對銅鎳合金的腐蝕作用基本均以沿晶腐蝕為主，但程度不同；
Primary exp anded intergranular pore is the most dominant in the pore types, and they derived from solution of feldspar and cutting.
孔隙類型主要是擴大原生粒間孔隙，由長石、巖屑直接溶解而成；
A Study of Grain Boundary Segregation and Intergranular Embrittlement Fracture
溶質晶界偏聚和晶間脆性斷裂的研究
Grain boundary engineering for intergranular corrosion resistant austenitic stainless steel
抗晶間腐蝕奧氏體不銹鋼的晶界工程
Corrosion of metals and alloys - Determination of resistance to intergranular corrosion of solution heat-treatable aluminium alloys
金屬及其合金的腐蝕.經溶液熱處理的鋁合金的抗粒間腐蝕的測定
Standard Test Methods of Detecting Susceptibility to Intergranular Corrosion in Wrought, Nickel-Rich, Chromium-Bearing Alloys
煅制高鎳鉻軸承合金晶間腐蝕敏感性的檢查用測試方法
Standard Practices for Detecting Susceptibility to Intergranular Attack in Austenitic Stainless Steels
奧氏體不銹鋼晶間浸蝕敏感性的檢測
Standard Practices for Detecting Susceptibility to Intergranular Attack in Ferritic Stainless Steels
鐵素體不銹鋼晶間腐蝕敏感性檢測
Practices for Detecting Susceptibility to Intergranular Attack in Austenitic Stainless Steels
奧氏體不銹鋼中晶間沖擊敏感性檢測的實施規程
original porosity is typified by the intergranular porosity of sandstones and the intercrystalline and oolitic porosity of some limestones
原生孔隙度以砂巖粒問孔隙度和某些石灰石的晶體粒間和鮞狀孔隙度為代表。
Intergranular Corrosion Cracks of Austenite Stainless Steel Containing Silicon
含硅奧氏體鋼管的晶間腐蝕裂紋分析
the main reservoir was intergranular pores and intragranular dissolved pores;
主要的儲集空間為粒間孔和粒內溶孔；
Nickel-based alloys - Determination of resistance to intergranular corrosion
鎳基合金.抗晶間腐蝕性的測定
