lithography
美 [l??θɑɡr?fi] 
英 [l??θ?ɡr?fi]
英漢雙解
1. | 平版印刷術the process of printing from a smooth surface, for example a metal plate, that has been specially prepared so that ink only sticks to the design to be printed |
英漢解釋
英英解釋
例句
Cylinder lining is divided into a printing plate cylinder lining and rubber cylinder lining, Nano-imprint lithography drum has no lining.
滾筒包襯不分印版滾筒包襯和橡皮滾筒包襯，壓印滾筒不不安縱包襯。
Rubberand drum and a printing plate cylinder, pressure drum Nano-imprint lithography, how much of the trilogy of the view that reasonable?
橡皮滾筒與印版滾筒、不抬印滾筒之間的不張力，本相多不小為公道呢？
The General output each color view un skin to see if you need to empty or nano-imprint lithography.
凡是輸入時每一個顏色查察可以更正一下是否需給掏空或壓印。
A printing plate cylinder and nano-imprint lithography drum is hard and bring pressure to bear on the surface, the deformation of after.
印版滾筒和不抬印滾筒是硬性的暗地，施加不張力后是不易變形的。
Electron beam lithography technique has developed in recent thirty years. It has been used in many fields such as micro fabrication.
電子束曝光技術是近三十年來發展起來的一門新興技術，目前廣泛應用于微細加工等各種領域。
At nineteen, Winslow learned the process of lithography. this work was the only formal training that Winslow had ever received in art.
十九歲時，溫斯洛學會了平板印刷的程序，這是溫斯洛在藝術領域曾經接受的最為正規的訓練。
As a development tool, lithography simulation excels due to its speed and cost-effectiveness.
作為一個發展工具，平白印刷模型的優勢在于它的速度和投入產出。
First, a silicone mould is built by means of a stereo lithography pattern of the mould .
硅樹脂填充型是強振動下測量的一個選擇。
Laser lithography is one of the main methods for manufacturing micro-optical and the binary optical masks.
激光光刻是加工微光學及二元光學掩模的主要手段。
As a result of nano-imprint lithography by embossing of the paper in its teeth in its live drum, paper will slide and elongation.
由于不抬印洋的紙張由不抬印滾筒叼牙叼住，紙張會因滑不靜而伸短。
System in the case-making, as well as books before and after sealing, Nano-imprint lithography title on its back and patterns, etc.
制做好的書殼，在前后封以及書背上，壓印書名和圖案等。
As the density of VLSI circuit increases, the proximity effect has been one of the critical issues in optical lithography.
隨著超大規模集成電路（VLSI）圖形密度的增大，臨近效應已成為光學光刻的關鍵問題之一。
Comparing this method with soft lithography, it has the advantage of high efficiency, big area, low cost and no residual polymer layer.
與現有的制備聚合物木堆結構的軟刻蝕技術相比，具有制備效率高、面積大、成本低、無多余粘連層等優點。
When the ink is transferred to nano-imprint lithography ink roller, if higher viscosity, the paper also will also be a bond and torn.
當油墨遷徙到壓印滾筒時，如果油墨黏度較矮，紙弛還會兩背同時被粘結而被撕下一塊。
When the ink is transferred to nano-imprint lithography drum, if viscidity is higher, the paper also will also be a bond and torn.
當油墨遷徙到壓印滾筒時，如果油墨粘度較矮，紙弛還會兩背同時被粘結而被撕下一塊。
Offset lithography: A modification of the lithography process by an American I. W. Rubul.
間接石印（柯式）：由美國人魯布把石印方法改良而成的間接印刷方法。
Coating compositions of the invention are useful as photoresist overcoat layers, including in immersion lithography processing.
本發明的涂料組合物可用作光致抗蝕劑的覆蓋涂層，包括可用在浸漬平版印刷工藝中。
The PMMA mold with a microstructure was fabricated using synchronous radiation lithography.
首先利用同步輻射曝光，制作出帶有微結構的PMMA模具。
This situation, you should carefully check, wrinkle parts of nano-imprint lithography drum and carry it in its teeth.
差這栽境況給不苛查抄，從頭調動起皺部位壓印滾筒叼牙的叼力。
In the last decade or so, lithography acceptation business card printing and membership card making speed faster and faster.
不遠紛歧幾年來，陡版膠印機的制卡和會員卡制息時不緩越來越遲。
A thin sheet of aluminium used in lithography as a base for plate coating after surface treatment.
一塊薄鋁片，經過表面處理后作為平版印刷用的版基，以承載版面涂層。
The new Troika Systems line-up spans a wide range of printing disciplines, including gravure, intaglio, flexography, and lithography.
新的三駕馬車系統系列產品的跨度范圍廣泛的印刷學科，包括凹印機，凹版印刷，凸版印刷，平版。
The experimental researches on atom lithography got a rapid development these years and have made a series of significant progress.
近年來，有關原子光刻的實驗研究得到了快速發展，并取得了一系列重大的實驗進展。
Sanlian lithography alone would have been encoded with the new factory bike to the various stores, so stores have not a single triple.
三聯單光刻本來編碼自行車新廠的各種品牌專賣店，商店還沒有一個單一的三倍。
Rotary gilding the spilling of the drum, the drum with the Nano-imprint lithography bronzing on rolling contact, implement stamping.
圓壓圓燙金所用的燙金版為滾筒狀，燙金時與壓印滾筒對滾接觸，實現燙金。
Experimental results of deep submicron lithography with a excimer laser are reported in this paper.
報道用遠紫外準分子激光進行亞微米光刻的實驗結果。
An empty part of the plate, leaving no water in the Nano-imprint lithography process blanket and dip it to paper, paper.
印版空缺局部的火不合，在壓印歷程洋，堵住橡皮布沾到紙張上，被紙張汲取。
Pharmaceutical companies have begun to inspect the first systems for performing bioassays produced by Surface Logix's soft lithography.
表面羅技公司使用軟微影術來制作生物測定設備，制藥公司也開始檢視這些初期的系統了。
Nano-imprint lithography tooth and delivery of dental junction also do not see the exception.
壓印牙與收紙牙移交也看不不入有變態本體。
A conic primitive based intermediate pattern and its data format of electron beam lithography are defined.
在一種新的電子束曝光機二次曲線單元圖的基礎上定義了一種中間圖形數據格式。
Most processes can trace their roots back to the earliest form of 3-D printing: stereo lithography.
大部分的程序都是來源于最早的3-D打印機的模式：立體平版打印機。
Die itsintercalation mounted on the reciprocating motion of the platforms, and nano-imprint lithography cylinder reciprocating contact.
模切版嵌裝在往復運動的平臺上，與壓印滾筒往復接觸。
The plates in the plates of the rollers, scraping knife components and nano-imprint lithography drum composition of gravure press.
這種印版用在由印版滾筒、刮墨刀組件及壓印滾筒組成的凹印機上。
A new support generation algorithm is proposed to meet the need of adding support for the part fabricated by stereo lithography.
針對光固化等快速成形工藝中須對零件加支撐的需求，本文提出一種新的支撐自動生成算法。
Image transfer is good or bad to a large extent depends on Nano-imprint lithography drum of rubber.
圖像遷徙的不幼不幼在很不小程度上取決于壓印滾筒最內層的橡膠。
Two main installation methods of lithography projection lens were studied in this paper, and their characteristics were discussed.
對兩種主要的光刻投影物鏡安裝方式進行了研究，并對各自特點進行了討論。
nano-imprint lithography drum skin abrasion or drop, causing the paper punches-drum so that the poor contact dot untrue.
壓印滾筒磨損或掉皮，造成壓印滾筒與紙張接觸不良，使得網點不實。
The smallest linewidth produced by laser lithography plays an important role in the properties of the micro-optical elements.
光刻的最細線寬對所加工的二元微器件性能起決定作用。
Nikon and rival ASML Holding NV are going toe-to-toe in lithography, but the two the companies have markedly different strategies.
尼康和ASML在高端光刻機領域是一對死對頭，不過兩家公司的EUV戰略有著顯著的不同之處。
And then have the pictures and texts constitute a part of adsorption inks, lithography business card printing and membership card.
然后使圖文局部吸附油不朱，組不敗平版制卡和會員卡制息。
