pseries
美 
英
例句
Together, this family of hardware offers 64-bit environments for your application on Linux on pSeries at a low total cost of ownership.
這個系列的硬件一起為您的應用程序提供了一個pSeries上的Linux上的64位環境，并且只具有很低的總體成本。
In effect, pSeries has been able to leverage some of the iSeries technology that was initially derived from the zSeries systems.
pSeries已經可以有效地利用最初從zSeries系統繼承來的一些iSeries技術。
In addition to supporting Linux in a partition, the new pSeries "Linux ready" systems can be used to run stand-alone Linux images.
除了支持分區中的Linux以外，新的pSeries“Linuxready”系統可以用來運行獨立的Linux映像。
If you are using a different distribution of Linux or different pSeries hardware, your procedures may vary from what you see here.
如果您使用的是不同的Linux發行版本或者是不同的pSeries硬件，安裝過程可能會與您在這里看到的有所不同。
Linux for iSeries and pSeries is in the unique position as a development environment of offering many different compilers.
針對iSeries和pSeries的Linux作為一種提供多種不同的編譯器的開發環境是無與倫比的。
On smaller stand-alone pSeries Linux systems, it may be desirable just to connect an ASCII terminal or terminal server to the serial port.
在較小的獨立pSeriesLinux系統中，或許可以僅僅在串口上連接一個ASCII終端或者終端服務器。
One of the currently available POWER chips available for entry-level pSeries servers.
目前入門級pSeries服務器的一種POWER芯片。
Linux distributions on both iSeries and pSeries systems run in a logically partitioned environment (LPAR).
在iSeries和pSeries上，Linux發行版本在一個邏輯分區的環境（LPAR）中運行。
This set of hardware is currently being expanded with introduction of POWER5-based systems in pSeries lines of IBM e-server products.
這組硬件現在正在通過在IBM的e-server產品的pSeries產品線中引入基于POWER5的系統不斷進行擴展。
The iSeries and pSeries specific diagrams shown here illustrate the slightly different hypervisor structures.
下方展示了iSeries和pSeries的一些特定圖表，闡明了hypervisor結構的細微差別。
On the POWER-based servers, both pSeries and iSeries servers, you can run your Linux applications on enterprise-strength reliable servers.
在基于POWER的服務器（包括pSeries和iSeries服務器）上，您可以在可靠性為企業級的服務器上運行Linux應用程序。
The pSeries servers offer industry-proven performance, scalability, and reliability.
pSeries服務器提供了經過業界檢驗的領先性能、可擴充性和可靠性。
The hardware was configured in a three-tier environment using various pSeries AIX servers.
硬件是在一個使用不同pSeriesAIX服務器的三層環境中配置的。
iSeries and pSeries servers can use the VisualAge compilers from IBM, to generate well-optimized code for these systems.
iSeries和pSeries服務器可以使用來自IBM的VisualAge編譯器來為這些系統生成高度優化的代碼。
A pSeries partition is booted using a partition profile that identifies its hardware resources.
使用指明其硬件資源的分區配置文件引導pSeries分區。
This article steps you through the installation of Linux on a pSeries system.
本文將引導您完成在pSeries系統上安裝Linux的全過程。
The third area you need to plan is to have redundant VIO servers on the same physical pSeries or System P server.
需要規劃的第三個方面是在同一個物理pSeries或Systemp服務器上設置冗余的VIO服務器。
As mentioned earlier, some smaller pSeries systems can also run single stand-alone Linux images without using partitioning.
如前所述，有一些較小的pSeries系統還可以運行單一的獨立的Linux映像，不需要使用分區。
The 55 percent CPU improvement was on a pSeries server with two Domino partitions.
55的CPU性能提高體現在有兩個Domino分區的pSeries服務器上。
Can I run any Linux application that has been compiled on a pSeries server, on the iSeries platform?
我可以在iSeries平臺上運行之前在pSeries服務器上編譯的任何Linux應用程序嗎？
There is a maximum of 32 partitions per pSeries system with at least 32 processors on it.
最多有32個分區的pSeries系統上至少要有32個處理器。
This article covers the installation of Linux on a pSeries system.
本文將介紹Linux在pSeries系統上的安裝。
Most Linux applications written on pSeries platform will run unmodified on the iSeries platform.
大部分在pSeries平臺上編寫的Linux應用程序都無須任何修改就可以在iSeries平臺上運行。
The pSeries test machine used was a p570+ configured into multiple LPARs.
我們使用的pSeries測試機器是一臺配置為多個LPAR的p570+。
With the AIX 5. 2 operating system, pSeries processor resources for AIX or Linux are allocated as whole processors.
使用AIX5.2操作系統，用于AIX或者Linux的pSeries處理器資源以整個處理器為單位進行分配。
In summary, iSeries and pSeries systems have a lot in common in their support for Linux software in partitioned systems.
總之，iSeries和pSeries系統在對分區的系統中Linux軟件的支持方面有很多共同點。
In our example, though, we used one IBM eServer pSeries 630 machine to migrate the database on two logical partitions.
雖然在這個實例中，我們只使用一臺IBMeServerpSeries630機器將數據庫遷移到兩個邏輯分區上。
The pSeries box is partitioned using the OpenFirmware to assign the system resources, such as CPU, memory, storage, and other devices.
用OpenFirmware對pSeries機器進行分區，以便分配系統資源，比如CPU、內存、存儲器以及其他設備。
With faster processors, such as the IBM pSeries 690, you could allocate as small as 1 CPU per partition.
使用更快的處理器，如IBMpSeries690，您能夠分配小到每個分區1個CPU。
Many pSeries devices use the typical device drivers for their device type.
很多pSeries設備使用它們自己設備類型的典型設備驅動程序。
Hints and tips for working with the application server on iSeries and pSeries servers
在iSeries和pSeries服務器上使用應用程序服務器的提示與技巧
One IBM eServer pSeries 690 server machine at the disaster recovery site with the following configuration
災難恢復站點上的一臺IBMeServerpSeries690服務器機器具有以下配置
60-day LTP stress execution results: pSeries
天LTP壓力執行結果：pSeries
