bevel

美 [?bev(?)l] 　英 ['bev(?)l]

• v.斜；把…截成斜角形
• n.斜面；斜邊；斜角規
• adj.斜的；斜削的
• 網絡倒角；斜切；傾斜

詞形變化

復數：bevels  

英漢雙解

英漢解釋

n.	1. 斜角;傾斜,斜面;【數】斜截,斜削 2. 【機】傘齒輪 3. 萬能角尺,斜角規
adj.	1. 斜的,傾斜的,斜角的;斜削的
v.	1. 把...截成斜角形,斜切,斜截 2. 成斜角;傾斜,斜

英英解釋

n.	1. a sloping surface along the edge of a piece of wood, glass, etc.

例句

Use a Brush Tool to add a bit of a highlight on the bevel. Use the Blur Tool to soften the highlight.

用畫筆工具在斜面上添加一小塊高光。使用模糊工具來軟化亮點。

This means the motor drive shaft axis parallel with the drum, canceled easy to damage the bevel gears, drive more simple.

這種傳動方式的電動機軸與滾筒軸平行，取消了容易損壞的錐齒輪，使傳動更加簡單。

This model is classical metallic European style, whose bevel design style looks elegant and easy to clean surface.

這個設計是古典歐式金屬風格，它的邊角設計看起來高貴并且易于清洗。

In these cases it is often good design practice to go to the spiral bevel gear, which is the bevel counterpart of the helical gear.

在這種情況下，往往是好的設計實踐中去，以螺旋錐齒輪，它是錐對應的螺旋齒輪。

To give your text the appearance of depth by adding or changing an edge, point to Bevel, and then click the bevel that you want.

要通過添加或更改邊緣為文字賦予深度外觀，請指向“棱臺”，然后單擊所需的棱臺效果。

Bevel gears are useful when the direction of a shaft's rotation needs to be changed.

當兩傳動軸旋轉時需改變方向時，采用錐齒輪是一種十分有用的方法。

Spiral bevel gears are usually used to improve the bearing capacity of the angle transmission gears on drill rigs.

在鉆機里常采用弧齒圓錐齒輪提高角傳動齒輪承載能力。

Bevel the burr hole on the edge of the side where the Micro Sensor will exit. This will facilitate removal of the Micro Sensor.

在微傳感器探出的邊將單孔削成斜角，這能輔助微傳感器的移走。

Using the spiral bevel gear as the research objective, the system put up the dynamic analysis of spiral bevel gear in the high level.

論文以弧齒錐齒輪系統為研究對象，對高速級弧齒錐齒輪進行了動力學分析。

A contrast experiment for the spiral bevel gears was carried out on a rotor test facility with elastic supports.

在轉子系統模擬試驗臺上，對發動機主傳動錐齒輪接觸性能進行了實驗研究。

The company is the domestic processing of the few large spiral bevel gear manufacturer one.

本公司是國內為數不多加工范圍較大的弧齒錐齒輪制造廠家之一。

The meshing contact-impact and contact performance of spiral bevel gears has a strong impact on the whole machine performance.

螺旋錐齒輪的嚙合接觸沖擊特性和動態接觸性能的好壞嚴重影響其整機的工作性能。

This paper describes the difference between the terms of groove and bevel in weld joints and condition in ASME Code translation .

本文敘述焊接接頭中術語剖口與坡口的區別和在ASME規范翻譯中應注意的問題。

Used for details within the icons and bevel highlight.

用于圖標和斜面高光處的細節。

and a supporting tube is sleeved outside the spline shaft position between the box body and the gearbox body of the bevel gear.

位于箱體和傘齒輪變速箱體之間的花鍵軸部位外套支撐管。

This paper analyses the factors influencing the service life of spiral bevel gears on rigs and proposes some measures to improve them.

該文分析了影響鉆機弧齒圓錐齒輪工作壽命的因素，并提出了改進措施。

The object feeding box is composed of an object separation bevel and a bearing chassis.

該物件饋送匣包含有一物件分離斜面及一承載底盤。

A way of promptly repairing mesh interspace and mesh width during the course of assembling bevel gear is introduced.

介紹一種錐齒輪裝配過程中，修配嚙合間隙和嚙合寬度的快捷方法。

The purpose of this paper is to provide the theoretical basis for designing high-tooth spiral bevel gear cutter head.

本文的研究為等高齒弧齒錐齒輪的刀盤設計提供理論基礎。

Spur gear (SGA) or compound bevel gear (BGA) attachments can be provided in any position shown in Figure 1.

如果采用正齒輪（SGA）或復合傘齒輪（BGA）附件，則可以在圖1中顯示的各個位置安裝手輪。

The whirly demoulding mechanism designs of shape-gear and the whirly plastic parts of bevel gear injection mould were introduced.

介紹了斜齒輪塑件注射成型模具的齒形型腔旋轉式和斜齒輪塑件旋轉式兩類脫模機構設計。

The principle of the bevel type differential can be seen if the unit its considered as two discs and a lever (Fig. 3-19).

該傘型微分原理可以看出，如果單位認為其作為兩個光盤和一個桿（圖3-19）。

The research achievement in this paper will provide reference for the design of the bevel foundation in the seasonal frozen soil region.

本文的研究成果將為季節凍土區斜面基礎的設計提供參考。

Spiral bevel gear is the mechanical transmission fundamental element. Its space shape and the machining process are very complicated.

螺旋錐齒輪是機械傳動的基礎元件，其空間形狀和加工過程相當復雜。

The bevel and mix operators and correlation operator were respectively chosen as the focus measure method of coarse search and fine search.

選取邊緣檢測算子和卷積算子分別作為調焦粗搜索和精搜索階段的清晰度評價算子。

I used a new layer set to multiply and a vague Bevel and Emboss layer style to add some depth to the cracks.

我又新建了一個圖層設置成正片疊底，通過斜面浮雕的圖層效果增加裂痕的厚度。

Matching numbers were engraved on the small bevel gear bevel gear head and a large back taper.

配對號分別刻在小圓錐齒輪頭部和大圓錐齒輪的背錐部。

The inner gears have been made with splines and a bevel modifier.

內部的傳動機構是用樣條線配合倒角修改器做出來的。

Moreover, the formula of optimal bevel slotting angle has also been checked by an example.

而且通過實例驗證了兩變厚齒輪斜向插削角度計算公式的正確性。

The results show that the stress distributions in roots of the bevel gear are different under respective loads.

光彈性試驗結果表明錐齒輪在兩種載荷分別作用下，齒根應力分布是不同的。

The differential case supports the differential-pinion gear on a shaft, and this gear meshes with the two bevel gears.

差速器殼支承在行星齒輪軸上，行星齒輪與兩個半軸齒輪相嚙合。

bevel gear : Either of a pair of gears with teeth surfaces cut so that they can connect unparallel gear shafts.

斜齒輪：用以連接不平行齒輪軸齒輪的任一對齒面切削。

Moreover, the computation simplification algorithm and processing of the bevel value is presented in the paper.

另外，本文對于斜角值計算的簡化算法及處理流程也做了研究。

Direct drive to the rolls with heavy-duty helical bevel gears where the output shaft is directly coupled to the roll shaft.

高堅固的螺旋斜線軸承直接驅動輥筒。輸出軸直接連接輥軸，中間沒有任何傳動消耗。

The space is effectively utilized by adopting a bevel gear driving mechanism, and the volume of the ejection device is greatly reduced.

采用錐齒輪驅動結構來有效地利用空間，大大減小彈射裝置的體積。

The gradient of back bevel of condyle process should positive correlation to the gradient of back bevel of glenoid fossa in deflected side.

偏斜對側髁突后斜面斜度與關節上間隙，關節結節高度呈負相關。

Straight as well as bevel cuts are possible with the wall saw.

直錐以及正在播出的墻上看到削減。

Another difficulty, which occurs in predicting the stress in bevel-gear teeth, is the fact the teeth are tapered.

另一個困難是，它發生在預測應力錐齒輪牙齒，是一個事實，牙齒是錐形。

The quenching distortion of rear axle spiral bevel gear used in FLAT tractor is studied in this paper.

研究了菲亞特拖拉機后橋大圓錐螺旋齒輪淬火變形規律，分析了原淬火壓模存在的問題。

A new type of combination electrode of spiral bevel gear is developed. The design procedure of the electrode is presented.

研制了螺旋錐齒輪新型組合電極，提出了設計方法。