thermoplastics
美 
英
- n.熱塑塑料；熱塑性物質
- adj.熱塑性的
- 網絡熱塑性塑料；熱塑性塑膠；熱固性塑料
詞形變化
復數：thermoplastics 反義詞
英漢解釋
英英解釋
例句
Moreover, lightweight thermoplastics due to its good performance will be applied to automobile and transportation, etc.
由于其獨特的性能特點，輕質熱塑性片材必將在汽車、交通等領域獲得更為廣泛的應用。
The two key points about the flow of thermoplastics are that the behavior is non-Newtonian and that viscosities are very high.
熱塑性塑料流動性主要有兩點：非牛頓流體以及很高的粘度。
And all-starch thermoplastics was developed with starch as raw material and a little amount of degradable additive.
以淀粉為原料，添加極少量的可降解的助劑，形成全淀粉熱塑性材料。
Plastics piping systems. Thermoplastics valves. Test method for the integrity of a valve after temperature cycling under bending.
塑料管道系統.熱塑閥門.彎曲下溫度周期變化后閥門完好性的測試方法
plastics piping and ducting systems . thermoplastics pipes . test method for resistance to external blows by the round - the - clock method.
塑料管道和導管系統。熱塑管。抗日夜外部連續沖擊應力的試驗方法。
Thermoplastics: Materials which have the property of softening repeatedly on the application of heat, and of hardening again on cooling.
熱塑性物料：能重復的因受熱而軟化，冷卻而硬化的物料。
The silane effect noted with some of these fillers and pigments in common thermoplastics will be described specifically .
下面將具體敘述觀察到的硅烷在常用的熱塑料中與幾種填料和顏料的反應。
Marie, Mich. "We do a lot of laminating of continuous fiber wetted out with thermoplastics, " Ball said.
瑪麗，密歇根州“我們做了很多層壓連續纖維潤濕與熱塑性塑料，”球說。
plastics piping systems . thermoplastics valves . test method for the integrity of a valve after an external blow.
塑料管道系統。熱塑性塑料閥門。外部沖擊后閥門完好性的試驗方法。
plastics . polypropylene and propylene - copolymer thermoplastics . determination of isotactic index.
塑料制品。聚丙烯和丙烯共聚物熱塑塑料。全同立構指數的測定。
This is recognized by the fact that thermoplastics are usually heated to a soft state and then reshaped before cooling.
這由事實認可熱塑性塑料通常被加熱對一個軟的狀態在冷卻之前然后被改造。
The present invention relates to a thermoplastics envelope-core reinforced gear. It consists of thermoplastics and high-strength material.
熱塑性塑料包芯增強的齒輪，由熱塑性塑料和高強度材料組成。
Plastics welding personnel - Qualification testing of welders - Thermoplastics welded assemblies.
塑料焊接人員.焊工資格檢驗.熱塑焊接組件
Determination of Thermoplastics under certain conditions, the melt flow rate of the special equipment.
測定熱塑性塑料在一定條件下的熔體流動速率的專用儀器。
Minimum scrap loss. Runners, gates, and scrap can usually be reground. Recycled thermoplastics can be injection molded.
廢料損失最小化：澆道、閘道和廢料通常可以重新研磨。循環熱塑性塑料可以注塑成型。
Compared with thermoplastics, what are the advantage and disadvantage of thermosetting plastics?
相比之下，熱塑性塑料、熱固性塑料的有利和不利的地方有哪些？
Plastics piping systems. Thermoplastics pipes. Determination of resistance to internal pressure at constant temperature.
塑料管道系統.熱塑塑料管.恒定低溫度下耐內壓性能的測定
Plastics piping systems. Thermoplastics fittings. Test method for mechanical strength or flexibility of fabricated fittings.
塑料管道系統.熱塑塑料配件.組裝配件的機械拉伸強度或柔韌性的試驗方法
Filler materials for thermoplastics - Scope, designation, requirements, tests.
熱塑性塑料用填充材料.范圍、名稱與符號、要求和試驗
The rheology of a thermoplastics melt is complex, being very dependent on temperature and shear rate.
熱塑性樹脂熔體流變學是復雜的，十分依賴于溫度和剪切速率。
Mufflers molded with long fiber thermoplastics demonstrate improved dimensional stability as compared to known short fiber based moldings.
與已知的短纖維基模塑制品相比，用長纖維熱塑性塑料模塑的消音器具有改進的尺寸穩定性。
Plastics piping and ducting systems. Injection-moulded thermoplastics fitting. Test method for visually assessing effects of heating.
塑料管道和導管系統.注模熱塑配件.熱效應目視評定的試驗方法
Plastics hoses - Helical-thermoplastic-reinforced thermoplastics hoses for suction and discharghe of aqueous materials - Specification.
塑料軟管.含水材料抽吸和排放用螺旋熱塑增強熱塑性軟管.規范
The fuselage and the wing which are made of thermoplastics are elastic and durable.
機身和機翼用熱塑料制成，富有彈性，并且耐用；
Plastics piping systems. Thermoplastics piping systems for soil and waste discharge. Test method for airtightness of joints.
塑料管道系統.土壤和廢料排出用熱塑管道系統.粘接處密封度試驗方法
Traditional plastics are not biodegradable; recycling of plastics, especially thermoplastics, has become an important industry.
塑料不能生物降解，但塑料的資源的回收與再利用，尤其是熱塑性樹脂，已成為一個重要的行業。
Plastics piping systems. Determination of moisture content in thermoplastics by coulometry.
塑料管道系統.比色法測定熱塑材料的含水量
Molecules of thermoplastics take the form of long chains.
這些物料的分子是鏈狀結構。
Other plastics can be repeatedly repeated to return to the plastic state; they are thermoplastics.
其他塑料可以反復加熱返回到塑性狀態，它們是熱塑性塑料。
Plastics piping systems. Thermoplastics valves. Test methods for resistance to internal pressure and leaktightness.
塑料管道系統.熱塑閥門.抗內壓和防泄漏的試驗方法
The application of thermoplastics with small hole injection molding technology in TV' s covers is introduced.
論述熱塑性塑料微孔注射成型技術在電視機外殼上的應用。
Acetal is among the strongest and stiffest of all thermoplastics.
在所有的熱塑性塑料中，乙縮醛具有最高的強度和硬度。
PLASTICS PIPING SYSTEMS. THERMOPLASTICS FITTINGS. TEST METHOD FOR IMPACT STRENGTH. (EUROPEAN STANDARD EN 12061).
塑料管道系統.熱塑配件.沖擊強度的試驗方法（EN12061）
In this work, cyanate ester resins were modified with thermoplastics and renewable resource, i. e. epoxidized soybean oil(ESO) respectively.
本論文分為兩部分，分別采用熱塑性樹脂和生物基材料環氧大豆油對氰酸酯進行了改性研究。
Thermoplastics pipes - Determination of tensile properties - Part 1 : general test method.
熱塑管.拉伸特性的測定.第1部分：一般試驗方法
Is easy to disperse in rubber , thermosets and thermoplastics greases and printing ink . It will not lump or agglomerate in handing .
易于分散在橡膠，熱固性塑料及熱塑性塑料，油脂，油墨中。凝結不結團。
Testing of welded joints of thermoplastics semi-finished products - Part 5 : macroscopic examination.
熱塑半成品焊接接頭的試驗.第5部分：宏觀檢驗
THERMOPLASTICS VALVES. FATIGUE STRENGTH. TEST METHOD. (EUROPEAN STANDARD EN 28659).
熱塑料制閥門.耐疲勞強度.試驗方法.（歐洲標準EN28659）
Testing of welded joints of thermoplastics semi-finished products - Part 8 : requirements.
熱塑性半成品的焊接接頭試驗.第8部分：要求
THERMOPLASTICS VALVES. TORQUE. TEST METHOD. (EUROPEAN STANDARD EN 28233).
熱塑料制閥門.轉矩.試驗方法.（歐洲標準EN28233）
