electrohydraulic

美 [elektro?ha?d'r?l?k] 　英 [elektr??ha?d'r?:l?k]

• adj.電液伯；電液的；電動液壓電力液壓的
• 網絡電動液壓的；電控液壓式；液電水壓碎石

英漢解釋

adj.	1. 電液伯 2. 電液的 3. 電動液壓電力液壓的

英英解釋

adj.	1. using, or relating to the use of, electrical and hydraulic components

例句

This paper introduces the working principle, simulative and experimental results of an electrohydraulic vibration impact system.

介紹了電液振動沖擊系統的構成、工作原理、仿真和試驗結果及其在剁銼機上的應用。

Through theory modelling, establishing the mathematics model of the electrohydraulic proportional overflow valve loading system.

通過理論建模，建立了電液比例溢流閥加載控制系統的數學模型。

A introduction of super high hydraulic pump project and dead zone dynamic compensation of Electrohydraulic proportional control systems .

介紹一種超高溫液壓泵源方案及電液比例控制系統的死區動態補償。

CEI input hand controllers are specifically designed to operate CEI's electrohydraulic valves and actuators.

CEI輸入手控制器是專門設計用于操作CEI的電液閥門和執行器。

MultiAir employs an electrohydraulic system to independently control each cylinder's inlet air charge.

多重空氣系統采用電液控制每個氣缸獨立的進氣費。

This steering gear is of the electrohydraulic type.

這種舵機是電動液壓式的。

TheTM-55P Actuator is an electrohydraulic, proportional actuator forcontrolling diesel and gas engines or steam and industrial gas turbines.

技術備忘錄-55p致動器是一個電液比例控制驅動器的柴油和天然氣發動機或蒸汽和工業燃?xì)?/c>渦輪機。

Methods: Electrohydraulic lithotripsy through the T tube treated 142 cases who had choledoochoscope with T tube drainage.

方法：142例行膽總管探查和T管引流術后經T管行液電碎石及取石治療。

a jet-pipe electrohydraulic servovalve is used instead of the direct regulating valve for gas temperature control.

為解決這一問題，提出了一種以射流管電液伺服閥替換原有調節閥溫控系統的改進方案。

Objective: To study the management of retained intrahepatic biliary calculi by the electrohydraulic lithotripsy (EHL) in cholangioscopy.

目的：探討經膽道鏡液電碎石治療肝內膽管殘余結石的方法。

Study of the Control System and Its Analog Experiment for Hydraulic Support Electrohydraulic Stepper Motor

液壓支架電液活齒步進馬達控制系統和模擬實驗研究

Causes of Conticaster Because Electrohydraulic Servo Valve Breakdown out of Control Analysis of the Slippery Drainage Opening

電液伺服閥故障引起連鑄機滑水口開度失控的分析

Research of a New Type Magnetostrictive Electrohydraulic High Speed On - off Valve and its Driving and Controlling Technique

新型超磁致伸縮電液高速開關閥及其驅動控制技術研究

Design of a Microcomputer Based Measurement and Control System for Electrohydraulic Universal Material Testing Machines

電液式萬能試驗機微機測控系統的設計

Study of the Technology of Electrohydraulic Proportional Control System to Copper Electro-Cathode Board Die Machine

銅電解陰極板沖鉚機電液比例控制技術研究

Power transmission engineering; electrohydraulic lifting appliances; dimensions and technical requirements

傳動技術.電動液壓的升降設備.尺寸和要求

The structure consists of the electrohydraulic servo and a rotary blade type steering engine device;

其結構由電液伺服器和轉葉式舵機裝置所組成；

Application of a Modified Neural Network Control Algorithm in Electrohydraulic Servo System

一種改進的神經網絡控制方法在電液伺服系統中的應用

Application of a new type electrohydraulic lithotriptic microelectrode on the treatment of bile duct stones

新型液電碎石微電極治療膽管結石的臨床研究

Research on Factors Effecting Control Accuracy of One-channel Electrohydraulic Servo System Applied to Flight Simulation Turntable

影響仿真轉臺單通道電液位置伺服系統控制精度的因素探討

The application and study of electrohydraulic proportional system in high speed feeder mechanism

電液比例系統在高速送料機構上的應用與研究

Biliary Tract Expansion Combined with Electrohydraulic Lithotripsy in Treating Complex Hepatolithiasis

膽道擴張和液電碎石在復雜性肝內膽管結石治療中的應用

Research on Control Valve of Pneumatic Restoring Energy with a Large Load and High Precision by Electrohydraulic Servo Drive

大負載高精度電液伺服驅動之氣體能量控制閥研究

Dynamic characteristics analysis of intelligent electrohydraulic valve actuator

智能型閥門電液執行器的動態特性分析

Virtual Instrument-Based CAT System for Testing of Static and Dynamic Characteristics of Electrohydraulic Proportional Directional Valve

基于虛擬儀器的電液比例方向閥靜動態特性綜合CAT系統

Proportional integrated electrohydraulic servo-positioner suitable for giant turbine governor

巨型水輪機調速器比例集成式電液隨動裝置

Research on Electrohydraulic Proportional Position Control System With Deadzone fuzzy Compensation control

電液比例位置控制系統的死區模糊補償控制研究

Research of Self-Excited Oscillation at High-Frequency in Electrohydraulic Servovalve and its Solution

電液伺服閥高頻自激振蕩問題的研究及解決方案

Fuzzy CMAC neural network control of the electrohydraulic position servo systems subjected to unknown disturbances

電液位置伺服系統的模糊CMAC神經網絡控制研究

Reinforcement Learning Control of an Electrohydraulic Position Servo System

電液位置伺服系統的再勵學習控制研究

Application of Speed Control Device of Electrohydraulic Variable Resistance in Combustion- Supporting Blowers of Heating Furnaces

電液變阻調速控制裝置在加熱爐助燃風機上的應用

Study on an Electrohydraulic Loading System for Indoor Experiment Bench of Tractor Working Units

拖拉機作業機組室內仿真的電液加載系統

Design of the electrohydraulic proportional valve-control compensating synchro-system

電液比例閥控補償同步系統設計

Adaptive Model Following Control of Electrohydraulic Nonlinear Systems Using Discrete Nonlinear Reference Model

電液非線性系統模型跟隨自適應控制的離散非線性參考模型方法

Research of electrohydraulic proportional control system for multi-wheel independent steering technology

電液比例控制多輪獨立轉向技術研究

Iterative Learning Control on Electrohydraulic Position Servo Systems of the Pump-controlled Cylinder

泵控缸電液位置伺服系統的迭代學習控制

Modeling and AMESim Simulation of Electrohydraulic Compound Regulating Integrated Actuator

電液復合調節作動器的建模與AMESim仿真

Analysis of the complication during the electrohydraulic lithotripsy of the choledochoscope ( report of 1508 cases)

膽道鏡下液電碎石術的并發癥分析（附1508例報告）

Modeling and Simulation of an Electrohydraulic Steering System for the Off-road Vehicle

輪式工程車輛電液轉向系統的建模與仿真研究

Experimental research on electrohydraulic forming technology

電液成形工藝實驗研究