solderability
美 [s?ld?r?'b?l?t?] 
英 [s?ld?r?'b?l?t?]
英漢解釋
例句
Three layers electrodes' protection, have good solderability.
三層電極保護，可焊性好。
Offers good solderability and excellent wettability .
具有良好的可焊性和優異的熔濕性。
Aerospace series - Elements of electrical and optical connection - Test methods - Part 501 : soft solderability.
航空航天系列.電氣和光學連接的件.試驗方法.第501部分：軟釬焊性
Aerospace series - Cables, electrical, aircraft use - Test methods - Part 509 : solderability.
航空航天系列.飛行器用電纜.試驗方法.第509部分：可焊性
The solderability of as-plated Pd coatings produced under different process conditions is good.
鍍態下，不同條件下制得的鈀鍍層具有良好的沾錫能力。
The environment of storage can affect the solderability of surface.
存儲環境對表面的可焊性有影響。
SOLDERABILITY AND BRAZEABILITY. DEFINITION AND USE OF A SPECIMEN WITH VARIABLE GAP.
可釬焊性.帶可變間隙試樣的定義和方法
This paper deals with results of solderability testing.
本文論述焊料可焊性試驗的結果。
SOLDERABILITY: According to lead free soldering profiles.
可焊性：根據無鉛焊接概況。
SOLDERABILITY: Wave solder, no wash.
可焊性：波焊，不洗。
Poor solderability of component or pad.
元件或焊盤可焊性太低
the layer had good solderability.
保證良好的鍍層可焊性。
That is why the solderability was measured before and after ageing also.
這就是為什么可焊性要在老化之前和之后分別進行測量。
Basic environmental testing procedures for electric and electronic products--Guidance on solderability testing by the wetting balance method
電工電子產品基本環境試驗規程潤濕稱量法可焊性試驗導則
Monolithic Structure for high reliability High self-resonant frequency Excellent solderability and high heat resistance
迭層獨石結構、高度可靠性高自諧頻率良好的可焊性和耐焊性
Aerospace series - Cables, electrical, aircraft use - Test methods - Solderability
航空航天系列.飛行器用電纜.試驗方法.可焊度
Analysis and Countermeasure about Solderability of Aluminum Electrolytic Capacitor
鋁電解電容器可焊性分析及對策
High Solderability Tin alloy Electroplating Technology for Aluminum and Its Alloy
鋁及鋁合金電鍍高可焊性錫基合金工藝
Elements of electrical and optical connection - Test methods - Solderability of contacts with self-contained solder and flux
光電連接件.試驗方法.有自制焊料和助熔劑的焊接點的可焊性
The Process Study of Corrosion Resistance and Solderability of Aluminum Alloy
鋁合金封裝外殼耐蝕性和可焊性工藝研究
Elements of electrical and optical connection - Test methods - Soft solderability
光電連接件.試驗方法.軟釬焊性
Solderability test for components leads, terminations, lugs, terminals and wires
元器件管腳，端點，接線片，端子及聯機的可焊性測試
Solderability Evaluation of Printed Boards with Protective Coatings Over Long-term Storage
帶保護性涂層印制板長期貯存的可焊性評價
Accelerated Aging for Solderability Evaluations
可焊性的加速老化評估
Standard Practice for Determining Solderability of Thick Film Conductors
厚膜導體的軟釬焊性測定
B Solderability Tests for Component Leads, Terminations, Lugs, Terminals and Wires
元件引線、端子、焊片、接線柱及導線可焊性試驗
Factors Influencing the Solderability of Electro Less Nickel and Immersion Gold Layer
化學鍍鎳金層可焊性的影響因素
Excellent solderability and heat resistance for either flow or reflow soldering
良好的可焊性和耐焊性
The Friction Stir Welding Solderability of the High Strength Al Alloy Plate
高強鋁合金厚板攪拌摩擦焊可焊性分
Test methods for bare wires--Solderability test of coating--Solder globule method
裸電線試驗方法鍍層可焊性試驗焊球法
Standard test method for solderability of metallic-coated products
金屬覆蓋層產品釬焊性的標準試驗方法
Development of high speed electroplating additives of unleaded pure tin for pin solderability deposits
引腳可焊性鍍層無鉛純錫高速電鍍添加劑的開發
On Solderability to Tiny Joint of Electronic Products When Melting Lead-free Solder
熔融無鉛焊料對電子產品微連接的釬焊性研究
Analysis and Correct the Bad Solderability of the Gold Plating
鍍金板可焊性不良成因分析及改善措施
Solderability tests for surface mounted devices
表面組裝元器件可焊性試驗
The Changes in Solderability Test Methods for Printed Circuit Boards
印制板可焊性測試方法的變化
Testing of Solderability for Soft Soldering; Wetting tests
軟釬焊效能檢驗.濕度檢驗
Solderability Evaluation of Thick and Thin Fused Coatings
厚、薄熱涂層的可焊性評估
Test Method for Solderability of Metallic-Coated Products
金屬涂覆產品的軟釬焊性試驗方法
Printed Wiring Boards, Solderability of
印制電路板的可焊性
