impellers
美 [?m?p?l?rz] 
英 [im?pel?z]
- n.【機】葉輪；【電】轉子；轉葉片；推進者
- 網絡推進器
詞形變化
復數：impellers
英漢解釋
英英解釋
例句
Use one impeller when mixing thin materials, Use two or three impellers on thicker materials. Made of stainless steel.
攪拌稀材料用一款攪拌器，稠狀液體使用兩到三個攪拌器，所有的推進器均采用不銹鋼材質。
the impellers of the fan is composed of at least a group of arc-shaped passage vanes with single closed lateral and axial magnification.
風機的葉輪由至少一組單側封閉、軸向放大的圓弧型流道葉片組成。
the neighboring impellers are staggered with a certain angle along the circumferential direction.
相鄰葉輪沿周向錯開一定角度。
To reduce the risk of clogging the ACS550 is supplied with a special program that has been developed to help keep impellers clean.
ACS550提供了一個特別程序以減少堵塞的危險，幫助葉輪保持清潔。
The two impellers are arranged at the lower end of the axle sleeve to ensure moderate air-draft amount.
兩片葉輪裝在軸套下端，確保引風量適中。
The impellers are elaborately designed and made, optimized for low noise level and lower energy consumption.
葉輪經過精心設計和加工，噪聲低、效率高。
Modle of a micro-flowrate high-speed centrifugal compressor(MHCC)impellers is builded and its performance is numerically studied.
建立一種空氣工質微小流量高轉速離心壓縮機葉輪模型并對其性能進行數值模擬研究。
Results show that: for impellers with variable dimensionless outlet widths, diffusers of different scales exhibit distinct responses.
研究結果表明：葉輪出口無量綱寬度不同，擴壓器尺寸的影響表現也不同。
A fan comprises a frame, motor base, impellers, flow guide parts and at least one flare opening.
一種風扇包括扇框、馬達底座、葉輪、導流組件與至少一外擴部。
The folding impellers are close to enter drum or bulk tank, opens up with mixing rotation.
這款折疊推進器，僅靠滾桶或散裝油罐入口，使用攪拌旋轉裝置打開。
Variable-pitch inducers can be fixed before impellers to lower the NPSHr of pumps efficiently.
為了有效降低泵的必須汽蝕余量，泵的吸入口可加裝前置變螺距誘導輪。
The thrust coefficient of different hydrofoil impellers was experimentally studied and simulated with CFD.
對幾種不同型式軸流槳的推力系數進行了實驗及CFD模擬研究。
Furthermore, a unique impeller component increased the rigidity of impellers and tumbler.
獨特的葉片組件結構提高了葉片和轉籠的剛度。
An excessive deposit of calcium carbonate can , also block centrifugal pumps impellers and the nozzle ring of the granulation chamber.
碳酸鈣罐子的過度存款，也阻塞離心的泵推進者和使成粒狀室的噴嘴戒指。
Therefore, to automate the optimum design of impellers can help to improve the performance of axial flow pumps.
所以要提高軸流泵的性能，葉輪的自動優化設計很值得研究。
Stainless steel dispersion, milling, stirring and sand mill impellers.
不銹鋼攪拌分散砂磨部件。
All castings are cast by resin sand, and impellers are machined with monolithic pouring technology.
齒輪為五級精度硬齒面，所有鑄件均為樹脂砂鑄造，葉輪為整體澆注。
The centrifugal pump consists essentially of one or more impellers rotating in the center of a casting.
離心泵基本上是由一個或多個葉輪組成，葉輪可在殼體中旋轉。
b. Ensure impellers on both ends are in the same direction and screw down with screws while installing.
在安裝葉輪時注意兩端的葉輪必須是同一方向并用螺釘緊固。
The authors study the manufacturing problem of standard impellers, and describe the geometrical model related to manufacture.
對增壓器用精密母輪的制造問題進行研究，描繪出制造相關的幾何模型。
Such cavitation often occurs in pumps, propellers , impellers, and in the vascular tissues of plants.
這樣的氣穴現象經常在水泵，螺旋槳，推進器，和植物的管狀組織里出現。
The pump consists essentially of one or more impellers rotating in the center of a casing.
離心泵基本上是由泵體中心旋轉的一個或多個葉輪組成。
The high strength-to-weight ratio of titanium is utilized to obtain the high tip speeds required for LH2 impellers and inducers.
高強度-重量比鈦是利用以獲取高尖端的速度所需的lh2葉輪和誘導。
and experiments with the same diffuser coupling different impellers are carried out.
在井用潛水泵上，將同一個導流器與不同的葉輪組合并進行了試驗。
to make the roots type more efficient , eaton has modified the impellers by adding a twist to them and moving the intake port to the end.
做根類型更有效率，伊芳頓已經透過增加一次擰修改葉輪到底對他們和移動吸入港口。
If impellers revolve inversely while machine started, exchange the three-phase (A and B) of three-phase power (see Fig. 2).
開機時發現葉輪倒轉，請將三相電源中的其中三相（A、B）交換即可（見圖二）。
The 3 D turbulent flow in the impellers of double channel pump was simulated.
對雙流道泵葉輪內3維不可壓湍流流動進行了數值模擬。
Axial impellers consist of four blades at a 45o angle.
軸流葉輪由四個在45度角的葉片組成。
In addition, it is shown that impellers optimized at design point may not have good acoustic performances at off design point.
此外，還指出在設計流量下優化的葉輪不一定在非設計工況下也有良好的聲學性能。
At present, the complex and irregular surface parts such as leaves and impellers are mainly machined by imported 5-axis NC centers.
目前，葉片、葉輪等復雜、不規則曲面零件的加工主要依賴進口的五軸聯動加工中心來實現；
Performances of Experiments Impellers Trimmed with Different Outlet Angles of Blade for a Centrifugal Oil Pump While Pumping Water
不同出口角離心油泵葉輪切割性能實驗
The Flow Simulation and Experimental Study of Low-Specific-Speed High-Speed Complex Centrifugal Impellers
低比轉速高速復合離心葉輪的流動模擬和試驗研究
Constraint modeling for the meridian passage in centrifugal impellers and its initial parameters
離心泵葉輪軸面流道約束建模及其初值計算
An Experimental Investigation on the Gas-Liquid Stirring Characteristics of the Combination Impellers
組合槳的氣液攪拌特性實驗研究
The heat-treating experiments on impellers of chlorine gas compressor
氯氣壓縮機葉輪熱處理試驗
Super speed autofrettage technology of the impellers of a booster
增壓器葉輪超速自增強技術
Key Techniques of Numerically Controlled Electrochemical Machining of Integrated Impellers
數控電解加工整體葉輪的關鍵技術
Sporting Goods (golf club heads, medical orthopedic devices, automotive turbocharger impellers)
運動器材（高爾夫球頭，醫療器材，汽車增壓器葉輪）
Optimization Designs of Electric Submersible Centrifugal Pump Impellers and Diffusers
潛油電動離心泵葉導輪的優化設計
Micromixing Characteristics in a Stirred Tank with Multiple Impellers
多層槳攪拌槽內的微觀混合特性
