oxyacetylene
美 [?ɑksi??set(?)l?n]
英 [??ksi??set??li?n] 
- adj.氧乙炔的(尤用于切割或焊接金屬)
- 網絡氧炔;氧炔焊炬吹管;氧化催化轉化器
英漢雙解
1. | 氧乙炔的(尤用于切割或焊接金屬)connected with a mixture of oxygen and acetylene gas which produces a very hot flame, used especially for cutting or joining metal |
| an oxyacetylene torch 氧乙炔炬 |
英漢解釋
英英解釋
例句
a mild pre-heating of the whole socket area is recommended. apply heat to parts to be joined. The preferred method is by oxyacetylene flame.
建議對整個管套區域進行適當的預熱。建議采用乙炔火焰對連接部件進行加熱。
Base metal both sides of welding to be preheating by oxyacetylene Welding & Cutting torches baking method.
采用氧乙炔割炬烘焙方法對焊縫兩邊母材進行預熱。
The reasons are given why weak carbonizing flame of oxyacetylene is used for heating and why brazing seam area can't be polished.
論證了加熱時氧——乙炔焰用微碳化焰的原因及焊縫結合區不能采用拋光的道理。
Nickel was even harder; he cheated and bought some commemorative coins, melting them with an oxyacetylene torch.
鎳更難獲得;他以哄騙加購買的方式,得到了幾枚紀念幣,用一支氧乙炔焊炬把它們熔化。
It has been shown that the fine and spheroidal graphite is favourable to the oxyacetylene cutting perfomance.
發現,愈是細小、圓整石墨形態愈有利于氣割。
Welding and cutting in 1949, Beijing has geo-drilling, electric welding and cutting etc oxyacetylene flame manual operation.
焊接與切割。1949年,北京已有氣焊、電弧焊及氧乙炔火焰切割等手工作業。
Perfect. You and sheldon go to the junkyard and pick up 6 square meters of scrap aluminum? Raj and i will get the oxyacetylene torch.
完美,你和謝爾頓去廢物堆積場找個6平方的鋁合板,我和拉杰搞定氧乙炔噴焊器。
Raj and I will run down to my lab and get the oxyacetylene torch.
Raj和我去實驗室弄些氧乙炔炬。
Select less hazardous work methods such as bolting (versus welding), or sawing (versus oxyacetylene cutting).
選擇危險性較低的工作方式,例如螺栓連接(與焊接相比較),或鋸切(與氧乙炔焰切割相比較)。
Exploration for the Treatment Technology of Welding Rails Normalizing Thereafter by Oxyacetylene Pressure Welding
鋼軌氣壓焊焊后正火處理工藝的探討
Application of Small Sized Digital Controlled Oxyacetylene Rail Welding Machine in Engineering of Rail Welding
數控小型氣壓焊軌機在焊軌工程中的應用
Oxyacetylene flame is used for heating, melt welding filler metal wires) and (the welding heat source;
氣焊的火焰是用來加熱、熔化焊件和填充金屬(焊絲)進行焊接的熱源;
Test Method for Oxyacetylene Ablation Testing of Thermal Insulation Materials
熱絕緣材料的氧乙炔燒蝕試驗方法
Raj and I will run down to my lab and get the oxyacetylene torch. Raj
和我去實驗室弄些氧乙炔炬。
Oxyacetylene pressure welding method of long rail
長軌氣壓焊方法
Cut off metal products by oxyacetylene blowpipe
用氧炔吹管的火焰來切割金屬