pipework

美 [?pa?p?w?rk] 　英 [?pa?p?w??(r)k]

• n.（統稱機器、建筑物等的）管道；管路系統
• 網絡管道工程；喉管；管道工程管

英漢雙解

英漢解釋

n.	1. 管道系統

英英解釋

n.	1. a set of pipes that carry water, gas, etc. around a building

例句

Pipework, with the exception of plastic piping, quantities have been converted into tons and are shown in the BOQ's.

管道（塑料管道除外）數量已轉化成噸，并列在BOQ中。

Pumps do not actually suck ; rather , pumps create a partial vacuum into which atmospheric pressure pushes water via the suction pipework.

水泵并不是實際的吸：更確切的說，水泵產生非完全的真空，然后大氣壓力將水通過吸管推進水泵中。

Therefore, the volume down to the topmost perforation must be accurately known (from the tally and surface volume of pipework).

因此，（根據管道系統的計數和表面積）準確了解下降到最頂層穿孔的體積。

Industrial pipework. Suction devices. Design requirements. Model for a technical sheet.

工業管道.吸氣設備.設計要求的特征.技術登計卡樣式

industrial pipework . suction pipe for atmospheric pollutants . basic metal components . specifications.

工業管道。大氣污染物吸入管道。基本金屬部件。規范。

All equipment will be bonded directly to the adjacent steel deck, no connections shall be made to pipework.

所有的設備將直接結合保護在鄰近的鋼板上，不需要管道連接。

Permanently installed pipework should be appropriately identified.

永久性安裝的管道應當有適宜的標識。

Industrial pipework. Non alloy and alloy. Steel bolting for flanged assemblies of pipeworks, boilers and pressure vessels. Specifications.

工業管道工程.管道、鍋爐和壓力容器法蘭組件用非合金鋼或合金鋼制螺栓

Industrial pipework. Suction pipe for atmospheric pollutants. Additionnal metal components . Specifications.

工業管道.大氣污染物進氣管道.補充金屬部件.規范

RAILWAY TRANSPORT EQUIPMENT. WEIGHT-SAVING EQUIPMENT. PIPEWORK. SWIVEL CONNECTORS.

鐵路車輛.輕型器材.管道系統.擺動式管接頭

INDUSTRIAL PIPEWORK. FLANGED ADAPTERS AND DISASSEMBLY SEAL FOR PIPEWORK. SPECIFICATIONS.

工業管道.管道用銜接器和帶法蘭的可調墊圈.規范

Mild steel structural frame set, one per array installed, complete with pipework support systems and interconnection couplings.

輕鋼結構框架集，每一個陣列安裝、設施齊全、保障系統聯網管線聯結。

industrial pipework . reduced shank bolts . specifications.

工業管道。小螺桿的螺栓。規范。

Pipework should be located to avoid risks of contamination of the intermediate or ApI.

管道的安裝處應當防止污染中間體或原料藥。

The processes on the Mobil and ESSO sites (all vessels and pipework ) shall be fully isolated during initiation.

在進行拆卸期間，應完全隔離美孚及埃索油站內的操作工序（所有油缸和管道裝置）。

shipbuilding . fire pipework . connector with international fitting ship side.

造船工業。消防管道。國際性配件連接器。

It is convenient to control the bending angle by the angle controller and makes multi-bends in different angle on a pipework easy.

操作方便的角度控制器使角度調整和連續彎曲幾個不同角度的管件極為方便；

INDUSTRIAL PIPEWORK. ORIFICE FLANGES FOR DIFFERENTIAL PRESSURE DEVICES.

工業管道.差動壓力裝置用有孔法蘭

These manifolds connect the units to the rest of the plant pipework .

這些歧管把各單元和其余單元的喉管連接起來。

Care must also be taken in the fabrication and installation of pipework grids.

還必須注意排管的制作與安裝。

RAILWAY TRACTION AND ROLLING STOCK. PIPEWORK CONNECTIONS ON DEVICES FITTED WITH O-RING SEAL PLUGS. INTERFACES.

鐵路車輛.帶O形密封圈的儀器管路的連接

Designed to lift off after removal of securing nuts to cab floor plate for easy maintenance access to cab pipework and controls.

設計后撤銷安全，便于維修管道進入駕駛室和控制果，駕駛室floorplate取消了。

Valves, fittings, pipework and accessories catalogue.

氣閥，配件喉管及輔助設備目錄。

Gravity drainage systems inside buildings - Part 2 : sanitary pipework, layout and calculation.

建筑物內的重力排水系統.第2部分：衛生管道，布局和計算

Industrial pipework. Suction pipe for atmospheric polluants. Terms and definitions.

工業管道.大氣污染進氣管道.術語和定義

Pipework - Corrugated metal hoses and hose assemblies.

管道工程.波紋狀金屬軟管和軟管組件

Also check that the adjoining pipework is clean and free from debris and burrs.

也檢查所連接的管道是否清潔，沒有碎片和毛刺。

At the same time , this mechanically stable connection safeguards the pressure connection , without additional pipework .

同時，機械穩定連接保護了壓力連接，不需要額外的管件。

basic pipework , pipefittng practice and apply practice.

學習基本水管安裝及使用法。

Edinburgh Castle: Gas and Water Pipework and supports for tunnel under the castle .

愛丁堡城堡的氣和水的管道設計及城堡下的隧道支撐工程。

Means for resealing threaded joints of gas pipework in buildings.

建筑物燃?xì)?/c>管道工程的螺紋接頭再密封的方法

Specification for corrugated stainless steel semi-rigid pipe and associated fittings for low-pressure gas pipework of up to 28 mm

最大直徑為28mm的輸送低壓氣體管道系統用波狀不銹鋼半硬式管和有關配件規范

Pipework - Corrugated flexible metallic hose assemblies for the protection of electrical cables in explosive atmospheres

管道工程.在爆燃性空氣中電纜保護用皺紋軟金屬管組件

Pipework; Single overlap flexible metal hoses (rubber packing, limited tightness, circular or polygonal section, in protected carbon steel)

管道工程.單層重疊式柔性金屬軟管（保護性碳鋼壁內環形或多邊形截面的有限密封橡膠脹環型）

Pipework - Single overlap flexible metal hoses (with packing, limited tightness, circular or polygonal section, in protected carbon steel)

管道工程.單層重疊式撓性金屬軟管（保護性碳鋼壁內環形或多邊形截面的有限密封石棉脹環型）

Pipework; Double overlap flexible metal hoses (unpacked, limited tightness, circular or polygonal section, in protected carbon steel)

管道工程.雙層重疊式柔性金屬軟管（保護性碳鋼壁內環形或多邊形截面有限密封的無脹環型）

Pipework - Double overlap flexible metal hoses (with packing, leakproof, circular section, in austenitic stainless steel)

管道工程.雙層重疊式柔性金屬軟管（奧氏體不銹鋼環形截面的密封石棉脹環型）

Pipework; Double overlap flexible metal hoses (copper packing, limited tightness, circular section, in protected carbon steel)

管道工程.雙層重疊式柔性金屬軟管（保護性碳鋼壁內環形截面的有限密封銅脹環型）

Pipework; Single overlap flexible metal hoses (unpacked, no tightness, circular or polygonal section, in protected carbon steel)

管道工程.單層重疊式柔性金屬軟管（保護性碳鋼壁內環形或多邊形截面的無密封和無脹環型）

Pipework - Double overlap flexible metal hoses (with packing, leakproof, circular section, in protected carbon steel)

管道工程.雙層重疊式柔性金屬軟管（保護性碳鋼壁內環形截面的有限密封石棉脹環型）