tundish
美 ['t?nd??] 
英 ['t?nd??]
詞形變化
復數：tundishes
英漢解釋
英英解釋
例句
The tundish temperature is one of the factors which seriously affect the solidification position of continuous casting slab.
中間包溫度是影響連鑄板坯凝固位置的重要因素之一。
The ingredients of magnesium coating used as the working Lining of the continuous casting tundish and its slag resistance are studied.
對中間包工作襯用鎂質涂料的配比及其抗渣性進行了研究。
A continuous casting stopper flux controlling mouth relates to a tundish casting nozzle in a metal continuous casting equipment.
一種連鑄塞棒控流水口，涉及金屬連續鑄造設備中的中間包澆注噴嘴。
The utility model has the advantages of stable blank casting quality, longer service life of the tundish, wide popularization prospect, etc.
本實用新型具有穩定鑄坯質量，提高中間包使用壽命，具有廣泛的推廣前景等特點。
The tundish slag penetration in coating is one of the key factors affecting coating removal after use.
中間包渣在涂料中的滲透是影響涂料用后解體性能的關鍵因素。
The utility model relates to the metallurgy continuous casting technology, in particular to a tundish nozzle preheating equipment.
本實用新型涉及冶金連鑄技術，尤其涉及中間包水口預熱裝置。
As a result, tundish current regulator can efficiently prevent short current flow and improve metallurgical result of tundish.
結果表明，使用中間包穩流器能有效地防止短路流，改善中間包冶金效果。
By the inference-resisting advantage of PLC, this paper gives a design which can improve the control of the tundish car.
利用PLC自身抗干擾的優點，本文給出一種設計方案，改進了中間罐車的控制。
Due to the bad conditions, the control of the tundish car is easy to be interfered by the environment.
由于現場環境惡劣，中間罐車的控制易受外界干擾。
With the improvement of continuous casting process , the techniques of tundish devices have been developed in recent years.
近年來隨著連鑄技術的不斷提高，中間包的冶金技術也有了很大的發展。
Comparing with double dams, the tundish fixed with baffles has a similar minimum residence time, but a less dead volume.
導流擋板與雙擋墻比較，最短停留時間變化不大，但死區體積更小。
Different gas blowing parameters are needed when gas is blowing through different porous materials at the same position of the tundish.
在中間包底部同一位里吹氣時，氣體通過的透氣磚不同，要求的吹氣參數不同。
some measures of quickly tundish changing, prevention of immersed nozzle clogging, rapid equipment maintain technology were described.
闡明了所采取的快速更換中間包、防止浸入式水口堵塞、設備快速維修等技術措施。
On the basis of experiments of water model, the heat tests in two kinds of tundish were carried out in Linfen Iron &. Steel Co.
在水模型研究的基礎上，進行了生產試驗，研究了兩種中間包內的鋼液溫度分布及夾雜物去除率。
Holding propreties of ladle and tundish is one of important subjects for steelmaking process.
鋼包及中間包的保溫是煉鋼工藝中研究的重要課題之一。
The influence of turbulence inhibitors with different structure on fluid flow behavior in tundish was studied by water modeling experiments.
通過水力學模型實驗，研究了不同結構的湍流控制裝置對中間包流體流動特性的影響。
The higher porous baffle wall can improve the flow pattern of the molten steel and enhance the metallurgical effect in tundish.
多孔高擋墻可以改善鋼水流態、提高中包冶金效果。
The utility model discloses a novel turbulence controller applied inside a continuous casting tundish for steelmaking.
一種用于煉鋼連鑄中間包內的新型湍流控制器。
The temperature distribution in modified tundish is homogeneous and such tundish is useful to enhance the quality of continuous cast slab.
優化后的中間包鋼液的溫度分布均勻，有利于提高連鑄坯的質量。
By using the similar principles, a physical model of thin-slab tundish with a certain scale was established in lab.
依據相似原理，在實驗室建立了一定相似比的薄板坯連鑄中間包物理模型。
By using the similar principles, a physical model of thin-slab tundish with a certain scale was established in the Lab.
依據相似原理，建立了一定相似比的薄板坯連鑄中間包物理模型。
By optimizing the shape of tundish, high grade protecting slag and flw field in mould, perfect effects are gained in operation.
并通過對中間包包形、保護渣、結晶器流場等的進一步優化，確保其達到安全、高效、穩定、順行的理想效果。
Analysis of RH carbon content by drilling bits will decrease the difference of carbon content between RH and tundish.
用鉆屑分析RH碳含量可提高與中間包碳含量的可比性。
The flow control devices of tundish for ingot casting has been optimized through hydraulics simulated experiment.
通過水力學模擬實驗，優化了模鑄連澆中間包控流裝置。
The macro inclusions in slab are mainly from the mould flux, and secondly from the ladle slag, and less from tundish flux.
板坯中大型夾雜物主要源于結晶器保護渣，其次源于鋼包渣，少部分源于中間包覆蓋劑；
Continuous casting process and billet quality were directly impacted by the bath level of molten steel in tundish.
鋼液在中間包內液位直接影響到連鑄生產過程的順行和鑄坯質量。
Tundish and ladle safety linings, ladle bottom and mending installation of ladles .
鋼包、中間包永久襯，鋼包底，鋼包襯補澆等。
The temperature difference and inclusion analysis of liquid metal in tundish were determinated in the production line to test the design.
然后在實際生產中應用，測定中間包內的鋼水溫度差、取樣分析夾雜物，以驗證設計的合理性。
The results show that there are short circuit flow and large dead volume in the tundish without flow control devices.
實驗結果表明，該中間包在無控流裝置時存在短路流，死區較大；
The flow in tundish has a great effect on the floatation of non-metallic inclusions.
中間包內流體的流動狀態對夾雜物的去除有重要的影響。
The development process and application situation of the self flow castable for permanent lining of tundish are introduced.
介紹了中間包永久層用自流澆注料的研制和使用。
The influence of turbulence inhibitor on flow field in tundish has been studied by water modeling.
通過水模實驗，研究了湍流控制器對連鑄中間包流體流動的影響。
A computer vision based on-line molten steel level measurement method is proposed for continuous casting tundish.
本文提出了一種通過計算機視覺技術檢測連鑄中間包內鋼水層液位高度的方法。
The critical highness of slag entrapment was gained in tundish.
同時確定了中間包卷渣的臨界高度。
And the suitable thermal martix for magnesium dry coating in tundish was put forward.
提出合理的中間包用鎂質干式涂料的高溫結合劑。
Large inclusion come from mould fluxes, oxidation products, tundish covering flux and so on.
大型夾雜物主要來源于結晶器卷渣、氧化產物和中間包覆蓋劑等。
In order to study the hot state of the tundish, the digital sampling temperature measuring equipment was developed.
為研究中間包的熱狀態，開發了計算機數字采樣測溫系統。
Mathematical Simulation of Steel Flow and Inclusion Movement in the Tundish with Gas Blowing at the Bottom
底吹中間包內鋼液及夾雜物運動特性的數模研究
Analysis and Treatment of Synchronous Hydraulic up and down Troubles of Intermediate Tundish Carriage for Billet Caster
方坯連鑄機中間罐車升降同步故障分析與處理
electromagnetic cleaning-ladle electromagnetic stirring, tundish centrifugal separating and mold electromagnetic braking;
電磁凈化-鋼包電磁攪拌、中間包離心分離和結晶器電磁制動；
