lathe
美 [le?ð] 
英 [le?ð]
- n.車床
- v.用車床加工
- 網絡車削；旋轉；車床修改器
詞形變化
復數：lathes 同義詞
英漢雙解
1. | 車床a machine that shapes pieces of wood or metal by holding and turning them against a fixed cutting tool |
英漢解釋
英英解釋
例句
The principle and method of transforming an ordinary lathe into a numerical control miller by adopting the SKY NC system was introduced.
介紹了一種利用SKY數控系統將普通車床改造成數控銑床的原理和辦法。
Under repair, common lathe, pins, bolts, nuts, etc, also used to increase the various parts of the surface finish.
在修理中，常用車床加工軸、定位銷、螺栓螺母等零件，同時也用于增加各種零件的表面光潔度等工作。
The lathe dog which drives the work tends to produce a shearing force.
而驅動工件的車床軋頭趨于產生剪力。
The small feeding carriage on the lathe is usually used for cutting the taper surface on the work piece.
車床上的小滑板通常用于切削工件上的圓錐表面。
When you draw the object, drawing the right side of the object will lathe as if it was spinning on a pottery wheel.
當你描繪對象時，繪制的對象右側將車削，就好像它是在一個陶紡輪上旋轉。
The permanent-magnetism frequency-conversion momental motor used for a lathe is in the drawing.
圖中為車床用永磁變頻力矩電機。
The job was in a small engineering workshop. My task was to turn metal rods on a lathe all day.
當時，我在一個小型制造車間打工，任務是從早到晚地翻轉車床上的金屬桿。
Do not use any sort of heavy machinery-- drill press, lathe, or mill; it will not be safe.
不要用像鉆床、車床、磨坊等重型器械，這樣不安全。
Clamp of two-hole lathe-turning acted as reference mutual designed, spotted with a surface and a pins, structure simple and reasonable.
設計的互為基準的二孔車削加工夾具，采用一面一銷定位，結構簡單合理。
My only diploma was as a machine lathe operator, from a course at the National Service for Industry.
我唯一的文憑是機床操作員，來自于“國家工業服務”的一個課程。
To avoid this, the underfloor wheel lathe or "ground" wheel lathe was developed like the one shown in the photo below.
為了避免架車，設計了地下式或地面式車輪機床，見下圖。
The largest part of the lathe is called the bed on which the headstock and the tailstock are fastened at opposite ends.
車床的最大的零件稱床身，車頭和尾架被緊固在相反末端的床身。
Lula's reverses are shown: the little finger lost to a lathe, the death of his first wife and child in childbirth.
LuladaSilva遭遇的挫折也呈現出來︰左手小指遭車床碾斷，第一任妻子在分娩過程與孩子一起去世。
A cone - shaped sleeve used FOR holding circular or rodlike pieces in a lathe or other machine.
套爪用以固著車床及其它機器中圓形或棒狀物件的錐形套筒
The feeding speed must be changed with continuousness and a rule, which can let the lathe work well.
旋切過程中刀刃進給速度必須按一定規律變化才能保證旋切機正常工作。
Most modern depots are equipped with a wheel profiling facility known as a wheel lathe.
大部分現代化的車輛段都裝備有車輪整形設備，例如車輪車床。
Used for support and connection lathe of each parts, and ensure that all parts in the job, with the relative position of the accurate.
用于支撐和連接車床的各個部件，并保證各部件在工作時有準確的相對位置。
If you up and quit on them, they'll just have to find another glass-blowing lathe operator who isn't as smart as you.
如果你應聘然后又辭職，他們只不過再去找個也許不如你精干的玻璃吹制員而已。
The products are dominantly applied to support high precision lathes like the machining center and NC lathe.
產品主要配套加工中心，數控機床專機等高精密度機床使用。
So it's a very complex, demanding job. In terms of security, in the open lathe must wear glasses before, not to wear gloves.
所以是一個非常復雜，要求很高的工作。在安全方面，在開車床之前必須戴上眼鏡，不要戴手套。
A fixture to machine pin on a lathe is presented. With it, high efficiency and quality machining can be achieved.
介紹一種銷軸車削用夾具，可實現此類零件高效、高質量的加工。
Through experiment the connection between the exserted length of tail-stock sleeve and the static rigidity of the CA6140 lathe is known.
通過試驗，得出了CA6140型車床尾座套筒伸出長度與車床靜剛度的定量關系。
Turning is the process of machining external cylindrical and conical surfaces. It is usually performed on a lathe.
車削是將外部圓柱和錐形表面加工的過程，是在車床上進行操作的
An operation whereby the surface of a bar is ground without using a lathe.
無須使用車床就可以研磨棒材表面的操作。
The company was founded in 1992, mainly produces mining machinery parts manufacturer , lathe processing instruments, sheet metal processing.
本公司創立于1992年，主要生產礦山機械配件、精加工、儀表車床加工、鈑金加工。
An improved repetitive control algorithm was developed to improve tracking accuracy for a linear servo unit in a numerical piston lathe.
為了提高非圓數控車削系統中直線伺服單元的跟蹤精度，該文提出了一種改進的離散重復控制算法。
The main objective of this task is to develop a detection system to test online unbalance of CNC Vertical Lathe workpiece during rotation.
本課題的主要目標是開發一個檢測系統，檢測數控立車工件旋轉過程中的在線不平衡量。
Used for installation tool and drive lathe tools for vertical, horizontal or oblique movement.
用于安裝車刀并帶動車刀作縱向、橫向或斜向運動。
The lathe hand may feed the cutter by hand or may make it be fed automatically by means of special gears.
車床操作工也許用手進料切削刀或也許用它通過特別齒輪自動地進料。
In 1873, the United States into a single spencer shaft automatic lathe, soon he and three axis made automatic lathe.
1873年，美國的斯潘塞制成一臺單軸自動車床，不久他又制成三軸自動車床。
It is proposed that the production of this kind of lathe should begin in a few months.
有人提出，有人提出，這種類型車床的生產應在幾個月內開始。練習
The block is mounted to a large faceplate on the lathe and a dial indicator is used to find the center of the cylinder holes.
該區塊是安裝在大型面板的車床和百分表是用來尋找中心的氣缸孔。
A cone- shaped chuck used for holding cylindrical pieces in a lathe .
車床內夾住柱狀物的椎狀卡盤。
this workpiece is held between the centers of the lathe, If the centers exert a compressive force against the work.
如果這個工件在放在車床中心之間，中心車床對工作產生壓力。
The company owns the advanced production equipments, including the CNC lathe, automatic lathe, the forging , twist thread machine.
公司擁有先進的生產設備，包括CNC電腦車床，各種型號自動車床，鍛打﹑搓牙機組。
The invention provides the six-spindle bar numerical control lathe with relatively high precision and high flexibility of a machine tool.
本發明就是提供一種精度較高，機床柔性高的六主軸棒料數控車床。
If this workpiece is held between the centers of the lathe, the centers exert a compressive force against the work.
如果此工件是夾持在車床的兩端頂尖之間，那么頂尖就對工件施加一股壓縮力
At the beginning of 20 centuries appeared by individual motor drive with gear transmission of the lathe.
20世紀初出現了由單獨電機驅動的帶有齒輪變速箱的車床。
The hole in the open side of the quill is tapered to enable mounting of lathe centers or other tools like twist drills or boring bars.
套筒軸開口端的孔是錐形的，能安裝車床頂尖或諸如麻花鉆和鏜桿之類的工具。
If this work piece is held between the centers of the lathe, the centers exert a compressive force against the work.
如果工件是被夾在車床中心之間，這些中心會對工件施加壓縮力；
