solder
美 [?sɑd?r] 
英 [?s?ld?(r)]
- n.焊料；焊錫
- v.焊接；焊合
- 網絡焊劑；焊接劑；軟焊
詞形變化
第三人稱單數：solders 現在分詞：soldering 過去式：soldered 同義詞
英漢雙解
1. | [u] 焊料；焊錫a mixture of metals that is heated and melted and then used to join metals, wires, etc. together |
1. | ~ sth (to/onto sth).~ (A and B together) 焊接；焊合to join pieces of metal or wire with solder |
英漢解釋
英英解釋
例句
Just as with the lead-based solder alloys, there are several alloys that seem to be the most commonly used.
就如同使用含鉛焊料合金一樣，同樣也存在幾種看來最為常用的合金。
and the adhesive layer is at least arranged on the lower surface of the ball collecting space to adhere the solder remains.
所述至少一黏著層至少設置在所述集球空間的下表面，以黏著所述焊料殘骸。
In some cases it may be necessary to connect metal surfaces by means of a hard spelter solder which fuses at hight temperature.
某些情況下有必要用一種高熔融溫度的強鋅焊料來連接金屬表面。
The mill duty latching connectors are are easy to wire with no need to field solder or to struggle with a crimp pin.
該廠責任閉鎖連接器線很容易，無需現場焊接或作斗爭，一卷曲針。
The reset button will "clip" in and stay put until you are ready to solder it in permanently.
重置按鈕，將“剪輯”，并留在付諸表決，直到您準備焊料，它在永久。
In the surface mounting technology, the result of the solder printing is very big to the product quantity.
在電子裝聯技術中，焊膏印刷的效果對產品質量關系極大。
Resist: Coating material used to mask or to protect selected areas of a pattern from the action of an etchant, solder, or plating.
阻劑：用來選擇性保護某圖形區域免受蝕刻劑，焊料或電鍍影響的涂層材料。
When washing is invalid, the solder may be out to put the residue to remove, until thoroughly until clean.
當沖洗無效時，可采用釬敲，以把殘渣去掉，直至徹底干凈為止。
Very low leakage current , compact , easy to use power entry filter with fast on tabs or solder terminals .
低漏電流，小巧，端子嵌入或焊錫，方便安裝和使用。
Subsequent inspection under magnification identified three solder joint which appeared to have melted and resolidified (see below).
接續的顯微鏡檢查發現，有三處焊接點似乎已被熔損并固化。
They were made from a wrought-iron sheet bent into a cylinder and joined along the seam with solder containing more than 90 percent lead.
這種罐是由精制鐵皮卷成圓筒而成，切口的縫由鉛含量達90%以上的焊錫來焊接。
The method for forming a solder mold for transferring solder to a wafer includes etching a plurality of solder cavities into a substrate.
一種用于形成用于將焊料轉移到晶片的焊料模的方法包括將多個焊料腔蝕刻到基板中。
If this happens the Fe concentration will increase rapidly and Fe-crystals can be seen on the surface of the solder pot.
如果發生這種情況，鐵濃度將快速上升，并且會在焊料槽表面上看到鐵結晶。
epoxy resin glue seems to be easier than solder paste bonded scraper.
環氧樹脂膠水仿佛比錫膏更便當粘結在刮刀上。
The present invention relates to a solder paste composition used for precoating an electrode surface with solder.
本發明提供一種釬焊膏組合物，該組合物可應用于電極表面預涂釬料。
The circuit board comprises a dielectric layer, a circuit layer and at least one electricity-conducting joint pole and a solder mask.
一種電路板，其包括介電層、線路層、至少一導電接合柱與焊罩層。
The old solder's face was white. Herbert and his mother laughed, but Mr White looked at Tom's face.
老兵的臉變白了。赫伯特和他的母親笑了起來。但懷特先生卻看著湯姆的臉。
A solder paste used for brazing was developed and its technical performance was investigated.
研制了鋁硬釬焊用釬料膏，對其工藝性能進行了研究。
Therefore, electroplating of lead-free solder coating is one of investigation hotspots in electronic electroplating field.
因此，電沉積無鉛可焊性鍍層是電子電鍍領域的研究熱點之一。
Now press the hot iron firmly against the splicewhile letting the free end of your solder rest against the other side of the joint.
現在，緊按住電烙鐵頂壓在接頭上，同時讓余下的錫焊料的“空閑”的未端去接觸接頭的另一側。
All solder powders that are used for our paste manufacturing are made under inert atmosphere and under tight quality control program.
我們制造焊膏所使用的焊錫粉是在惰性氣體和嚴格質量控制之下制成的。
Analysis of the solder pot is done by means of Atomic Absorption Spectrophotometric (AAS) or Inductive Couple Plasma (ICP) .
對焊料槽的分析是通過原子吸收分光光度（AAS）或電感耦合等離子（ICP）方式實現的。
apply flux to outside of tube and inside of solder cup . surfaces to be joined must be completely covered . use flux sparingly.
在管道外面和焊接端口內側涂上焊劑。需要連接的表面必須完全覆蓋焊劑。要節約使用焊劑。
New developments in flux chemistries for lead-free pastes do not require nitrogen to achieve good wetting and solder joint integrity.
無鉛焊錫膏的焊劑化學的新發展可以做到不使用氮氣也可得到良好的熔濕性和焊點完整性。
2-D X-ray cannot be used on double-sided boards unless each solder joint is in a unique location relative to the opposite side of the board.
第2，除非每焊劑聯接在一個獨特的地點相對委員會的反面X射線在兩面的委員會不可能使用。
Heat solder joints only to the point were solder will flow properly. Excessive heat may distort brass castings.
熱焊料連接只能用在焊料能夠正確流動的地方。過熱可能扭曲黃銅鑄件。
The solder glass is in a powdered form and is suspended in a liquid carrier for ease and accuracy of application.
為了便于使用和精確控制，焊料玻璃呈粉末狀，并懸浮于液態載體中。
The company mainly produces seal ring, nozzles, bushings , drilling teeth, solder films, ball valves, valve seats and other products.
公司主要生產密封環、噴嘴、軸套、鉆齒、釬片、閥球、閥座等產品。
More than 3 years working experiences in SMT processing and strong willing to be a technical sales in selling lead- free solder paste .
年以上SMT生產線工藝制程控制經驗，具有銷售無鉛錫膏產品的愿望。
The mould component can be used for testing exothermic solder molten metal mobility.
該模具組件可以用以測試放熱焊接劑熔化金屬流動性。
It is difficult for cream solder to enter into a male terminal insertion path at an inner side of the female connector.
膏狀焊料難以進入在所述陰連接器內側的陽端子插入路徑。
The minor lead would be found in lead-free solder rods after using them, then it makes the lead contaminant for the electronic components.
在無鉛焊錫棒材上使用后都會發現含有少量的鉛，而后會對對其電子元件造成鉛污染。
Do not touch solder paste bare-handed . Remove with ethyl alcohol from body or clothes if contaminated by solder paste.
小心使用焊膏，避免觸及皮膚。若附于衣服或身體時，應盡快用含有酒精的溶劑把焊膏抹掉。
The experiment results show that there is linear relationship between the solder joint creep damage and its resistance changes.
研究表明，焊點的蠕變損傷與其電阻變化存在著線性關系。
This will aid the solder in sticking to the wires allowing you to make more precise connections with less solder.
這將會在黏住允許你用比較少的焊接劑來制造比較精確的連接電線方面援助焊接劑。
One of the best predictors of resultant solder joint integrity is the volume of solder paste that was applied earlier in the process.
最佳預示所生成的焊點完整性的因素之一，是組裝過程起始施加的焊膏量。
In electronic material relation, we supply special conductive paste and a special register strike, solder, etc.
在電子材料的關系，我們供應特殊導電粘貼和特殊登記罷工，焊料等
Because in addition to the solder pads, and so on, the rest of the surface has a layer of resistance to soldering of the solder mask.
因為除了需要錫焊的焊盤等部分外，其余部分的表面有一層耐波峰焊的阻焊膜。
Solder Balling is recognized by numerous tiny solder balls trapped along the peripheral edge of the flux residue after reflow.
產品回焊后在殘留的助焊劑周邊會有大量小的錫球。
The company was founded in 1899 as the Chicago Solder Company to produce flux -cored solder .
凱斯特公司創立于1899年，當時公司名為芝加哥焊錫公司，主要產品是帶有焊劑芯的焊錫。
