ejector

美 [?'d?ekt?] 　英 [?'d?ekt?]

• n.噴射泵；排出器[管]；【機】彈射器；【醫】射出器
• 網絡噴射器；驅逐者；拋殼頂桿

詞形變化

復數：ejectors  

英漢解釋

n.	1. 排出器[管];【機】彈射器,噴射器;噴射泵;【醫】射出器;(塑料)推頂器 2. 驅逐者

英英解釋

n.	1. a device for ejecting something from something else, especially a mechanism for ejecting an empty cartridge or shell from a gun 2. a jet pump device that uses water, steam, or air to remove a gas, fluid, or powder from a space

例句

FIG. 3 is a cross-sectional view of a second implementation of a fluid ejector with a non-wetting coating on an outer surface.

附圖3是在外表面上具有非濕潤涂層的流體噴射器的第二實施例的截面圖。

a mechanism in a firearm that pulls an empty shell case out of the chamber and passes it to the ejector.

火器中的把空殼退出槍膛并把它傳送給排出器的裝置。

Wet processes are not required after etching the fluid ejector, and therefore residue associated with a wet process can be avoided.

在蝕刻該流體噴射器之后不需要濕處理，因此可以避免與濕處理相關的殘余物。

By numerical simulation, the optimal value of the plenum chamber height, the ejector slot height and the wall porosity have been found.

計算結果表明，不同的駐室高度和引射縫高度對實驗段馬赫數分布有很大影響；

Then I was told to please sit in a chair by an open window while he pressed something marked "Seat Ejector Button. "

后來他讓我坐到靠窗邊的一張椅子上，恍惚間看到他摁了什么”座椅彈射按鈕“。

The monolayer can be durable and can be insoluble in most solvents, allowing multiple types of inks to be used with the fluid ejector.

該單分子層是耐用的，并且在大多數溶劑中是不溶解的，從而允許在流體噴射器中使用多種類型的墨水。

In still another aspect, the invention features a method for forming a non-wetting monolayer on a selected portion of a fluid ejector.

在又一個方面中，本發明的特征在于在流體噴射器的選定部分上形成非濕潤單分子層的方法。

The technological parameters can be optimized through research on layout relations between wheel gripper, dumper, traverser, ejector etc.

通過對夾輪器、翻車機、遷車平臺、空車調車機等設備之間的布置關系的研究，可以對工藝參數進行優化；

FIG. 1C is a cross-sectional view of an implementation of the fluid ejector from FIG. 1B with a non-wetting coating on an outer surface.

附圖1C是附圖舊的流體噴射器在外表面上具有非濕潤涂層的實施例的截面圖。

The gate location, ejector pin location and parting line (especially cosmetic surface) must be approved by US before tooling .

入水、頂針位置以及分型線（特別是外表面）等在加工前必須得到美國確認。

Thus, during the latter part of the opening stroke the ejector assembly is pulled. thereby ejecting the mouldings.

因此，在開模行程的后階段，頂料板組合被拉出，塑件因而被頂出。

A mixing space is formed between the ejector nozzle of the central fuel gas jet pipe and the outlet of the burning nozzle main body.

中心燃?xì)?/c>噴管噴口與燒嘴本體出口之間有形成一混合空間；

The working process for cold extruding of valve-spring base has been described, with a new die structure using ejector turning of itself.

介紹了氣門彈簧座的冷擠壓工藝和新型模具結構。

Check the running direction of water pump and ejector sleeve motor when moving the machine and changing the external power switch.

移機或換外電源開關時，請注意檢查水泵電機與絲筒電機的運轉方向是否正確。

Ejector seat levers can only be used once, and their consequences are significant and irreversible.

彈射座椅操縱桿只能用一次，它的使用將引起重要的變化，而且這個過程是不可逆的。

A one-dimensional model was set up to simulate the working process of gas-liquid ejector.

建立了氣-液噴射器工作過程的一維穩態模型。

The machine consists of a gluing unit, auto mastic laminating unit and counter ejector unit.

該機器由上膠單元，裱紙單元及計數排出單元組成。

By optimizing ejector combustor geometry, ejector rocket in SMC combustion mode can obtain comparable thrust augmentation.

通過優化引射器后體結構，在SMC二級燃燒模式下工作的引射火箭可以產生較大的推力增強。

However, the normal practice is to couple the ejector assembly to the moving mould half by either length-bolts or chains.

可是，一般實用的方法是用長螺栓或鏈條，把頂料板組合連接到動半模。

An auxiliary ejector with as little blockage in the ducting as possible is placed behind the inlet of the diffuser duct.

一個輔助引射器，在通道中要以盡可能小的堵塞面積布置在擴壓器進口之后。

Following this, the counter ejector sends out the pile of cardboard and counts the quantity, then binds the pile of cardboard.

接著計數輸出單元將成堆的紙板輸出，計算數量，并打包。

In the case of air ejector priming device the operation procedure as follow.

在用自吸裝置的情況下，操作程序如下。

Part of an engine nacelle and an exhaust ejector are visible at left.

在左側可看見部分的發動機短艙和排氣頂針。

the distribution of secondary fuel on ejector jet cross section is significant for secondary combustion stability.

二次燃料在引射火箭通道截面上的分布對于引射火箭的穩定工作有重要意義。

Assembly organizations from push plate, push the semi-fixed panels and ejector rod composed of injection molding machines.

裝配機構由推板、推半固定板和注塑機頂出桿組成。

We stated previously that the ejector grid must provide adequate support for the mould plate.

我們前面已經說明頂料系統必須對模板提供足夠的支撐。

Second, facilities are not normally provided on the machine for actuating any type of ejector system from the fixed mould half side.

第二，注射機上通常不會配備任何類型的定半模頂料系統。這意味著在設計模具的時候必須包括頂料機構。

Forming an attachment region may include sputtering the first material onto the fluid ejector substrate and patterning the first material.

形成附著區域可以包括將該第一材料濺射到該流體噴射器襯底上，并且形成該第一材料。

and two flat oil grooves are formed at the junction part of the ejector rod and the moving iron core.

在頂桿與活動鐵心的接合部位設有兩個扁平狀油槽。

the fiber ejector pin adjusting mechanism is of manual mode or electric mode.

光纖頂桿調節機構為手動方式或電動方式。

All gates and ejector pin locations shall be approved by igt hardware engineering department paior to tool construction.

所有的大門和頂針位置應經糖耐量paior工具建筑五金工程部。

The orifice may be formed in the fluid ejector substrate prior to forming the non-wetting monolayer.

可以在形成該非濕潤單分子層之前在流體噴射器襯底牛形成該孔。

NO EJECTOR PIN MARK, GATE FLASH, SCRATCHES OR IMPERFECTIONS PERMISSIBLE ON SURFACE INDICATED.

在指定的表面上不允許有頂針痕跡，水口，刮痕或者壓痕。

The non-wetting monolayer may not cover any portion of an inner surface of the fluid ejector.

該非濕潤單分子層不能覆蓋該流體噴射器的內表面的任何部分。

Steam ejector is one fluid machine that pumps low-pressure fluids with high-pressure steam.

蒸汽噴射器是一種利用高壓蒸汽抽吸低壓流體的流體機械。

2 gate, vents parting line, and ejector pin locations must be approved by XXX prior to die construction.

澆注前，澆道、排氣道以及起模桿的鋪設位置必須經過XXX的批準。

The attachment region need not cover any portion of an inner surface of the fluid ejector.

該附著區域不需要覆蓋流體噴射器的內表面的任何部分。

Blanking and piercing punches must contain slug ejector pins wherever possible.

下料和刺破的沖頭需有備件隨時更換

During stage one, the moulding and attached peg are ejected by the ejector pins as shown at 'b'.

在第一階段，塑件和附加的柱銷被頂桿頂出，圖“b”。

Demanded by the technology of sulfonating reaction with SO3, a new type up-jet loop reactor(JLR) with multi-ejector was designed.

基于甲苯三氧化硫磺化反應工藝的需要，設計了一種分布式多噴嘴新型結構的上噴式環流反應器。