nozzles

美 [?nɑz(?)l] 　英 [?n?z(?)l]

• n.噴嘴；管嘴；〈俚〉鼻子
• 網絡噴嘴數量配置；接管；噴油嘴

詞形變化

同義詞

英漢解釋

英英解釋

例句

The company has a variety of applicators, nozzles, hoses, and melt units, allowing easy adaptation to any industry standard system.

該公司擁有各種噴頭，噴嘴，軟管，和熔體單位，使之易于適應任何行業標準的制度。

Though not as common as in the past, a bit may be fitted with asymmetric nozzles, one large and two or more small nozzles.

雖然不象過去那樣普遍，鉆頭仍可能被裝配非對稱的噴嘴，一個大噴嘴，兩個或多個小噴嘴。

The results of experiments showed that the nozzles number and spraying parameters of every nozzle were extracted in different field images.

結果表明，對不同的田間圖像該算法均能較好的自動確定噴頭的個數和每個噴頭的噴灑參數。

When the close time of the nozzles was set at the end of packing, the injection pressure, clamp force and parts quality were all better.

同時當澆口均設置為保壓結束時關閉，成型中的注射壓力、鎖模力以及制件質量較為理想。

The upper portion of a perfusion tube is provided with a twisted tube and a few arbitrarily changeable jet nozzles.

輸液管頂端使用曲折性管件和多個噴嘴，噴嘴可任意調換。

There are water spray nozzles at the top and a group of heaters at the bottom of the pressurizer .

穩壓器內頂部設有噴淋嘴，底部裝有電加熱器。

Thus the difficulty of punching the thick gun nozzles is overcome, and the service life of a punching mold can be prolonged.

由此可克服沖壓較厚槍嘴的困難度，可延長沖壓模具的壽命。

All air atomizing nozzles require a liquid line and an air source for the atomizing air.

所有空氣霧化噴嘴都采用液體管線和氣源使空氣霧化。

The spray nozzles are easy to clean and thus extremely maintenance-friendly.

噴嘴棒容易清洗，所以維修很方便。

Any contact with the bottom of the print head is likely to transfer ink and may result in damage to the ink nozzles.

跟打印頭底部的任何接觸都很可能產生漏墨現象，以致損壞墨粉噴嘴。

Its critical filling zone is very narrow; the distance between the filling nozzles and the front of the machine is less than 600mm.

其重要灌裝區很窄，填補之間的噴嘴和機器前面的距離不足600毫米。

Cold Jet's nozzles can be properly outfitted to ensure optimal performance with handles, extension tubes, stingers and a much more.

正確配備ColdJet噴嘴可以確保手柄、延長管、托架及其他設備的最佳性能。

Like the piezoelectric ink jet printing technology, a series of nozzles arranged in together, you will get a larger printing range.

像不抬電式噴印技藝差別，不兵一系列噴嘴擺列在一路，不離會獲得更不小的噴印邊界。

The company mainly produces seal ring, nozzles, bushings , drilling teeth, solder films, ball valves, valve seats and other products.

公司主要生產密封環、噴嘴、軸套、鉆齒、釬片、閥球、閥座等產品。

As a general rule, piping flanges should be concentric to pump nozzles to within the flange bolt hole clearance tolerance.

管路法蘭與泵口要同心，偏差不能超過法蘭螺栓孔尺寸公差。

a small syringe with detachable nozzles; used for vaginal lavage and enemas .

帶有可分離的噴嘴的小注射器；用來洗陰道或腸。

This process is used for making wheels, nozzles and similar parts where the axis of the part is removed by subsequent machining.

這種工藝被用于制造車輪、管嘴及類似的隨后可用機加工去除中心軸部分的零件。

The utility model relates to a sprayed pipe, consisting of a main pipe, branch pipes and nozzles.

本實用新型噴淋管是由主管、支管及噴嘴組成。

All pipe lines, valves, and nozzles shall be isolated from the atmosphere by a blank, pipe cap, or plug when not being used.

當不在操作使用時，所有管線、閥門、和噴嘴應用盲板、管帽、或塞子使其和大氣隔開。

Contouring nozzles to reduce particle lag losses does not appear to be appealing.

為了減少顆粒滯后損失而成型的噴管是沒有多大發展前途的。

Indicates whether or not the print head nozzles need cleaning.

表明打印頭噴嘴是否需要清洗。

The image forming apparatus includes a carriage for moving a recording head having plural recording nozzles in a horizontal scan direction.

所述圖像形成設備包括構造用于沿水平掃描方向移動具有多個記錄噴嘴的記錄頭的墨車。

The structure and application of the jet nozzles which are specially common used in paper machine are in focus.

重點介紹造紙機上常用幾種噴嘴的結構及其使用要求。

Individual supply to all nozzles and good pressure regulation optimize equal distribution of the vaccine solution.

能單獨供應所有的噴嘴，很好的優化氣壓調節，使到達每個噴嘴的疫苗溶液相等。

The system incorporates Domino's self-cleaning and capping technology for the inkjet nozzles.

該系統融合了多米諾的自清潔和封蓋技術的噴墨噴嘴。

Bubble fountain nozzles are suitable for amusement park with a perfect view not limited by the water level. Many air-bubbles are adde. . .

泡沫噴頭效果，適用于游樂場，不受水位限制，不錯的效果，里面摻了好多的氣泡，不易對人體造成傷害。

It was beneficial to improve stirring of condensation kettle and jet nozzles of latex and steam for energy saving and consumption reducing.

改進凝聚釜攪拌槳、膠液噴嘴、蒸汽噴嘴等有利于節能降耗。

Fire hoses with adjustable stream-to-spray nozzles should be available where large quantities of flammable cryogenic liquids are handled.

在對付大量易燃低溫液體的地方應當備有帶有可調水量噴嘴的滅火水龍帶。

Compared with large opening without nozzles, the stress concentrations around the junction are sharply reduced because of the nozzles.

與未帶接管的大開孔結構相比，接管的添加大大降低了孔周邊的應力集中。

Martens tic aciduric stainless steel. Used in manufacturing cut tools, nozzles, valve, clack seat .

是馬氏體型不銹耐酸鋼的一種型號。一般做刃具，噴嘴，閥門，閥座用。

The air plenum under the grid at the base of the furnace distributes primary air to the fluidizing nozzles in the furnace floor.

空氣充滿物質的空間在格子之下在火爐的基礎分配對火爐地板的液化噴嘴的主要空氣。

Nozzles and reservoirs capable of storing eyedrop are also arranged on the spectacle frame.

所述鏡框上還設置有一噴頭和能儲存眼藥水的儲液器。

Straight or angled low flow nozzles designed to produce powerful cleaning capabilities for those whose need requires low air consumption.

設計具有強大清潔能力的直型或彎形低流量噴嘴，可滿足低耗氣量需求。

Sizes for pipes, pipe fittings, valves and vessel nozzles shall be designated in nominal diameter ( ND ) millimetres.

管道，管閥件，閥門和容器管口的尺寸應以毫米標明公稱直徑（ND）。

Wheel-mounted air nozzles for frictionless steering, steering unit programmable to operate multi-directional operations all at once.

方向盤上的摩擦steeering空氣噴嘴，立即轉向經營單位可編程多全方位行動。

in practice , the turbine disc and the nozzles are fitted into a casing.

實際上，渦輪圓盤和噴嘴是裝在機殼里的。

and the ideal flushing effect of the toilet can be achieved by regulations on the number and location of the nozzles.

通過調整噴嘴數量和位置，達到理想的便器沖洗效果。

Accordingly, a simple mechanism is provided for providing multiple printing nozzles.

因此，提供了一種用于設置多個打印噴嘴的簡單機構。

The design they ended up with was "rain" squirted from misting nozzles fitted on the ends of pipes stationed here and there on the slopes .

最后的設計方案是把散置在坡面上的水管在末端裝上水霧噴頭，然后把“雨水”從這些噴頭里噴出來。

The working principles of nozzles with plane and cylinder spiral flow passage respectively, are analyzed from the angle of hydrokinetics .

從流體動力學角度分析了平面螺旋流道型和圓柱螺旋流道型噴嘴的工作原理。