plasticizing
美 [p'læst?sa?z??] 
英 [p'læst?sa?z??]
- v.(使)成為可塑
- 網絡塑化；增塑；朔化
詞形變化
過去分詞：plasticized 現在分詞：plasticizing 第三人稱單數：plasticizes
英漢解釋
英英解釋
例句
The only function of the pre-plasticizer is plasticizing, injection is left to another unit called the plunger.
預熔器只做塑化，注射由獨立的柱塞負責。
PTW can increase the viscosity of the system and decrease the plasticizing time, while CPE on the opposite.
PTW的加入增大了體系加工時的粘度，縮短了塑化時間。
Resin material into a rotating screw, you should enter off three zones: the feeding area, compaction area and the plasticizing zone.
樹脂原料進入旋轉的螺桿時，要進過三個區域：喂入區、壓實區和塑化區。
The tube alumina substrates for ceramic membrane with good properties were developed, using paraffin and polyethylene as plasticizing agent.
以石蠟和聚乙烯作塑化劑，開發出了具有優異性能的氧化鋁基管狀陶瓷膜襯底。
To use the maximum heat resistance potential of NORPHAN? HTR residual solvents must be removed(plasticizing effect).
為了最大限度使用寶隆油墨的耐高溫性，殘余溶劑必須去除（塑化影響）
The influence of the glycerol contents on the plasticizing and mechanical properties were studied.
研究了甘油含量對材料的增塑作用及其對力學性能的影響。
This paper lays stress on DSC technology and method for measurement plasticizing or coagulating degree of RPVC mixture.
通過DSC技術與方法，定量了RPVC配料的塑化度或凝膠化度。
By comparing the test results, the performances of polycarboxylic plasticizers and Naphthalene plasticizing agent are discussed.
通過對比試驗，比較聚羧酸系塑化劑和萘系塑化劑的性能，并對結果進行了討論。
The injection weight, injection rate and plasticizing capacity change according to the model and kind of the material.
射出量，注射率及塑化能量依材料類別及模型而改變。
plasticizing unit drove by hydraulic pressure motor , simple in structure and maintenance.
液壓馬達直接驅動螺桿的塑化單元，結構簡單，維護簡單。
Special designed screw and barrel guarantee the high speed extrusion in super plasticizing quality.
特殊的桿筒設計，保證主機的高速押出，塑化良好。
The screw acts as a combination injection and plasticizing unit.
螺絲作為組合射入和成為可塑單位。
Based on the shear theory of hydrodynamics, the damping coefficient in plasticizing process is determined in this paper.
依據流體動力學的剪切理論，確定預塑過程聚合物熔體的阻尼系數。
High torque and excellent performance of hydraulic motor can drive screw directly and shorten plasticizing time so that saves energy.
采用高扭力、效率佳之油壓馬達，直接驅動螺桿，可縮短塑化時間節省能源。
When the temperature rises, the viscosity deceases, which is good for plasticizing.
料筒中料溫升高時黏度降低，有利于塑化；
The plasticized melt accumulates in front of the plunger. Only during injection (including holding time) is plasticizing stopped.
已塑化的熔融累積在注射柱塞的前面。只是注射時（含保壓）不加料。
Thermostat: It can accurately measure the temperature of cavity milling to prevent excessive temperature to caking and plasticizing.
能準確測出磨出粉料的溫度，防止溫度過高而引起的結塊和塑化。
The process that how to make use of polystyrene foam makes the binder for casting through modifying and plasticizing was discussed.
論述了如何利用廢聚苯乙烯泡沫通過改性、增塑合成鑄造用的粘結劑的工藝過程。
The Preparation of Chromatic Foam Capsules and A Study on the Plasticizing Effect of the Disperse Dyes
彩色發泡微膠囊的制備及分散染料的增塑作用研究
Determination of PVC particle size distribution and introduction to its plasticizing properties
PVC樹脂粒徑分布的測定及其塑化性能關系的探討
Training Necessary Diathesis of Public Relations and Plasticizing Fine Image of Our Hospital
培養必要公關素質塑造良好醫院形象
Study of exterior plasticizing acrylic coating formers
聚丙烯酸樹脂涂層的外增塑研究
Plasticizing and mechanical properties of glycerol plasticized starch foams
甘油增塑淀粉泡沫材料的塑化性能及力學性能
Uniform Plasticizing ? Uniform Stock Temperature
均勻塑化均勻儲料溫度？
Uniform Stock Temperature ? Uniform Plasticizing
均勻儲料溫度均勻塑化？
Study on synthesis of comb-shaped copolymers of polycarboxylic acid type and its plasticizing effect on cement
聚羧酸型梳狀共聚物的合成及其對水泥塑化效果研究
Clinical Experiences from Plasticizing Treatment of Dental Pulp
牙髓塑化療法的臨床體會
Finite element analysis and optimal research on plasticizing capacity of screws
螺桿塑化性能的有限元分析及優化研究
Effect of mineral admixtures on plasticizing efficiency of plasticizers
若干摻合料對減水劑塑化效果的影響
Advancement in Starch Plasticizing Mechanism
淀粉塑化機理研究進展
Worm Powder Extrusion Molding of Plasticizing Hardmetal Powder
硬質合金增塑粉末螺桿擠壓成形螺桿擠壓成形
A View on the Application of Volume Throttling Speed Control Circuit by Hydraulic System of Plasticizing Machine
從注塑機液壓系統看容積節流調速回路的使用
Study on Plasticizing Mechanism of Soy Protein by Epichlorohydrin
環氧氯丙烷增塑大豆蛋白的機理研究
The effect of the species of gypsum on subsidiary plasticizing mechanism of retarder agent
石膏種類對緩凝劑輔助塑化效應的影響
Soil Plasticizing Technique for EPB Shield Excavation
土壓平衡盾構施工中土的塑流化技術
Development of Novel Binder System for Plasticizing Powder Extrusion Molding
增塑粉末擠壓成形用新成形劑的研制
Pollution and Prevention and Cure of Plasticizing Agents
增塑劑的污染與防治
Regulating the Plasticizing Rate of R-PVC Pipe
硬質聚氯乙烯管材塑化度及調整
Approach to Plasticizing Quality of PVC Profiles
PVC異型材塑化質量的探討
Review of Plasticizing Lithium-Ion Battery
塑料鋰離子電池研究概況
