sintering
美 ['s?nt?r??] 
英 ['s?nt?r??]
- n.鐵的銹皮；【冶】熔渣；【地】泉華
- v.燒結
- 網絡燒結處理；熔結；高溫?zé)Y(jié)
詞形變化
過去分詞：sintered 現在分詞：sintering 第三人稱單數：sinters
英漢解釋
英英解釋
例句
A formula for the calculation of the heat conductivity of a sintering system containing solid phase, liquid phase, and gas phase is given.
給出了固相、液相和氣相共存的金屬粉末燒結體系導熱系數的計算方法。
During pressure sintering of iron-based powder metallurgy brake materials, the cooling water flow was one of the most important parameters.
對于鐵基粉末冶金剎車材料而言，加壓燒結冷卻過程中冷卻水流量是保證材料獲得優良綜合性能的關鍵參數之一。
An elevated temperature diffusion process referred to as sintering, sometimes assisted by external pressure, accomplishes this.
提升溫度擴散工藝被稱為燒結，有時還輔之以外界的壓力來達到目的。
The material is never fully molten, although there might be a small volume fraction of liquid present during the sintering process.
雖然在燒結過程中可能會有少量液態出現，但材料決不是全熔化。
And the result of the experiments shows that the components and sintering temperament are the key factors of preparing forsterite ceramic.
試驗結果表明：配方組成與燒結溫度是鎂橄欖瓷制備的關鍵因素。
The concept of reaction boronizing sintering technique, properties, kinds and applications of new type cemented carbide are reviewed.
本文就反應硼化燒結法的理念，新型硬質合金的種類、性能和應用做綜述。
The system measures pressure drop through the material column to determine the onset temperature for the sintering of bituminous rock.
根據達西定律設計了瀝青巖輸送特性實驗系統，該系統利用壓降法測量瀝青巖的初始粘結溫度。
Today RCE is market leader in the supply of this kiln type for sintering of raw materials used for refractory applications.
是這類用于耐火材料應用的原料的燒結窯的市場領先者。
If sintering temperature could be decreased and materials consumption be reduced, life time of sintering equipment can be extended.
如果能夠降低燒結溫度，降低物耗，就能夠提高燒結設備的使用壽命。
The surface and ambient temperatures of the crown of crusher in crushing sintering ore were measured in situ.
在現場測量了破碎機破碎燒結礦時其齒冠的表面溫度和環境溫度。
system is suitable in principle, the treatment is mass and did not influence sintering, and notable benefit is got.
經過研發、產檢驗，證明該污泥配加系統原理可行，處理量大且不影響燒結生產，效益顯著。
Gas volume through the sinter bed is one of the very important factors that determine the productivity of sintering.
通過燒結料層風量的大小是決定燒結機生產能力的重要因素之一。
The thermal theory of sintering ceramics is relatively mature after years of development.
陶瓷燒成的熱工理論經過多年的發展已經比較成熟。
With the increase of the sintering holding time, the relative density of the compacts hardly increases, but the hardness could be improved.
同時發現保溫時間對燒結體的相對密度影響不大，但硬度隨保溫時間的延長而增大。
After sintering the density of copper compact at the surface and the core was homogeneous.
經微波燒結后銅粉壓坯內外具有均勻的致密度。
Vertical suspended sintering furnace with a production of small, sintering deformation rate of over 95% of the benefits, but complex.
筆直懸掛燒結爐具有燒結變形小，不敗品率達95%以上的弊端，但擺設駁雜。
Disclosed is an environmental protection and energy conservation novel kiln, belonging to a roller kiln for sintering a ceramic product.
一種環保節能新型窯爐，屬燒制陶瓷產品的輥道窯。
The characteristic of short carbon fibre must be considered owing to the influence of carbon fibre on the sintering processing of composite.
在復合材料燒結成型過程中由于碳纖維的作用不能任意沿用普通粉末冶金工藝方法。
Microwave sintering, continuous sintering or rapid sintering and other new technology and equipment also came into being.
微波燒結，連續燒結或快速燒結等新技術和設備也應運而生。
also it pointed out that application of energy dissipation function is an effective method in describing complex powder sintering process.
同時指出，采用能量耗散方程是研究復雜粉末燒結過程的有效手段。
The variation rule of the vertical sintering speed with proceeding of sintering was investigated through the research of the air speed.
通過研究氣流速度的變化研究了垂直燒結速度隨燒結過程而變化的規律。
to have dewaxing and degreasing systems , the bond in sintering materials can be removed efficiently.
配置脫蠟脫脂裝置，可有效去除燒結材料中的粘合劑等成分。
then the sintering system control method was preliminary studied and finally got a more reasonable sintering system.
并對燒結制度控制方法進行了初步研究，最后得到了一條較為合理的燒結制度。
Through the energy spectrum analysis of the coating and matrix, the diffuse of elements can be found when sintering.
通過對涂層和基體的能譜分析，發現結合界面附近有明顯的元素擴散發生。
and (4) putting a pressing blank in a discharge plasma sintering device for vacuum sintering into a magnet.
將壓坯放入放電等離子燒結裝置中真空燒結制成磁體。
The pusher kiln is widely used to heat the electronic material with high temperature as a sintering device.
推板窯作為熱工燒結設備，廣泛應用于電子材料高溫處理。
Made of shaping Polytetrafluoethylene Resin into blank by moulding in ordinary temperature, through high heat sintering, then rotary cut .
用聚四氟乙烯燒樹脂在常溫下用模壓法制成坯料，經高溫燒結后旋切而成。
by the sintering, obtain the densification law of powder sintering process for the molybdenum billet.
由燒結實驗研究，得出燒結工藝對鉬粉坯料致密化的影響規律；
And also electrochemistry properties and character of friction and wearing about powder and sintering bulk had been analyzed.
分析測定了準溶混合金粉末燒結體的電化學性能、摩擦磨損性質。
The sintering process is the heart of the preparing process of coal ganguethermal insulation material.
煤矸石保溫材料的燒結過程是其制備工藝的關鍵。
Pore diameter increases with the increase of the sintering temperature , which leads to a decrease in rejection rate.
孔徑隨著燒結溫度的升高而增大，從而導致截留性能的下降；
A spray tower was built, and experiment was carried out on desulfurization of sintering flue gas with coking wastewater.
建立逆向氣液噴淋反應塔，利用焦化廢水進行燒結煙氣脫硫試驗研究。
Increasing sintering machine productivity is an effective way of meeting great demands in steel market and decreasing cost.
提高燒結機利用系數是滿足鋼鐵市場旺盛需求、降低成本的有效途徑。
Glaze permanent sintering in the glass surface and be a safe anti-acid-base and a new decorative glass products.
釉料永久性燒結于玻璃表面而得到的一種抗酸堿和安全性高的新型裝飾玻璃產品。
It is the precondition of rapid casting process to select polymer material that meet the case of both laser sintering and casting process.
選擇既適合激光燒結工藝又滿足鑄造要求的高分子材料是快速鑄造工藝的前提。
The results show that the product defects can be effectively avoided by improving injection process and sintering process.
結果表明，通過優化整個工藝參數，可以避免試樣缺陷的形成。
The rapid prototypes of the part and its die were fabricated by selective laser sintering (SLS), a rapid prototyping technique.
針對數值分析后的模型，采用激光選區燒結法快速制作零件及凹模的實體原型。
The surface reaction of water atomized 304L austenitic stainless steel powder during sintering has been studied.
研究了水霧化奧氏體不銹鋼粉末在致密時的表面化學反應。
The paper described the quantitative analysis of the law of sintering raw material and chamotte index wave Caused by the ash content.
本文詣在嘗試定量分析煤粉灰份造成燒結生、熟料指標波動的規律。
Sintering aids were one of key factors affecting microstructure and properties of silicon nitride ceramics.
燒結助劑是影響氮化硅陶瓷的顯微結構和性能的關鍵因素之一。
