crankshafts
美 [?kræ?k??æft] 
英 [?kræ?k??ɑ?ft]
詞形變化
復數：crankshafts
英漢解釋
英英解釋
例句
A few modern engines use cast crankshafts, made of special cast-iron containing chromium, nickel, and molybdenum.
多數現代柴油機是整體曲軸，用碳鋼或含有鎳、鉻和鉬的合金鋼鍛造而成。
After treatment, these crankshafts have concave surface, as well as retain minor black spots(see photo), and normal elsewhere.
經處理后，表面留有一處凹面，并有細微小黑點（請查看照片），其他地方正常。
This section describes the servicing of crankshafts, main bearings, and engine Blocks and cylinders.
本節介紹曲軸、主軸承、發動機機體和氣缸的維修。
You can machine all types of crankshafts from single-cylinder to twelve cylinder crankshafts.
零件類型涵蓋了從單缸到12缸的所有曲軸品種。
Crankshafts and connecting rods are not standardized.
曲軸以及連接桿都是沒有標準的。
Cast iron crankshafts are satisfactory in car and light-duty truck engines.
鑄鐵曲軸滿意在車里，輕型卡車發動機。
This is the ideal design milling, turning, broaching, and turn-broaching crankshafts.
這是針對曲軸銑削，車削，拉削，車-拉削加工的完美設計。
Application Study of the New Process of Production Line for Mini Diesel Engine Crankshafts
小型柴油機曲軸生產線新工藝的應用研究
Development and Application of Catenary Suspension Furnace for Quenching and Tempering of the Crankshafts
曲軸調質懸鏈爐的研制及應用
Superficial Analysis of Medium Frequency Induction Hardening Crack Occurrence on Nodular Cast Iron Crankshafts
球墨鑄鐵曲軸中頻感應淬火裂紋淺析
pilot hole with non-rectangular entry to surface, conical special case at crankshafts to avoid small step (which can cause breakage)
引導孔非矩形或圓錐形特殊的案例像在曲軸上為避免出現小臺階（小臺階可能會導致損壞）
Specification for magnetic particle flaw inspection of finished machined solid forged and drop stamped crankshafts
成品機制整體鍛造和落鍛沖壓曲軸的磁粉探傷規范
Standard Specification for Continuous Grain Flow Forged Carbon and Alloy Steel Crankshafts for Medium Speed Diesel Engines
中速柴油發動機用連續晶粒流向鍛制的碳素鋼及合金鋼曲軸技術規范
Standard Specification for Ultrasonic Examination of Large Forged Crankshafts
大型鍛件曲軸的超聲檢驗的標準規范
Study on applications of wavelet-neural network technique in tractor engine crankshafts'faults detection
小波神經網絡技術用于發動機曲軸探傷的研究
Studies on Application of Deep Rolling Depression Technology to Improve Fatigue Strength of Crankshafts
用深滾壓技術提高曲軸疲勞強度的應用研究
Specification for Ultrasonic Examination of Large Forged Crankshafts
大的鍛制曲軸超聲檢查規范
Application of the IGBT Variable Frequency Power Supply in Quenching Process of Engine Crankshafts
IGBT變頻電源在汽車曲軸淬火上的應用
Calculation of Stress Intensity Factors for Cracked Diesel Engine Crankshafts
含裂紋柴油機曲軸應力強度因子計算
The ionitriding technology of the diesel engine crankshafts
柴油機曲軸的離子氮化工藝
Application of FE Method in Control over Gas Nitriding-Related Deformation of Crankshafts
有限元計算在曲軸氣體滲氮變形控制中的應用
Ion Nitriding Technology of the Diesel Engine Crankshafts
柴油機曲軸的離子滲氮工藝改進
Big-diameter Crankshafts Produced by Electroslag Casting and Welding
電渣熔鑄-熔焊法生產大直徑內燃機曲軸的工藝研究
Ultrasonic Examination of Large Forged Crankshafts
鍛制大型曲軸的超聲波檢驗
Versatile solution for complete grinding of crankshafts
曲軸整體加工的多樣化解決方案
Quality Control of Automotive Engine Nodular Cast Iron Crankshafts
車用發動機球鐵曲軸的質量控制
Distortion Law and Control Method of High-Speed Diesel Crankshafts During Nitriding
高速柴油機曲軸滲氮畸變規律與控制措施
Design of Turning-broaching Cutter for Machining Crankshafts
加工曲軸用車拉刀的設計
Estimate of Application Prospect of Ductile Iron Crankshafts
球墨鑄鐵曲軸應用前景的評估
The Effect of Structure Morphology on the Fatigue Properties of Spheroidal Graphite Cast Iron Crankshafts
組織形態對球鐵曲軸疲勞特性的影響
A Calibration Method for Measuring Data in Dynamic Balancing of Crankshafts
曲軸動平衡檢測中一種數值校正方法
Quality control on machining of crankshafts used on Indian locomotives
印度機車用曲軸機械加工質量的控制
Reasonability analysis of iron plating for crankshafts
曲軸鍍鐵的合理性分析
Improving Measures for Tapping Quality of Steel Crankshafts
鋼質曲軸攻絲質量的改進措施
Investigation on crankshafts for low speed big powered diesel engines
低速大馬力柴油機曲軸情況的調查報告
Problems and the Relevant Solutions in Integral Grinding of Crankshafts
曲軸整體式磨削產生的問題和解決措施
Investigation on Oxynitriding Process for Nodular Iron Crankshafts
球鐵曲軸加氧滲氮工藝研究
Design and manufacture of crankshafts of low-speed diesel engine for vessel
船舶低速柴油機的曲軸設計與制造
Development of Bend Distortion Measure Machine for Variety of Crankshafts
適應多品種曲軸彎曲變形測量機的研制
Study on Matching of Internal-combustion Engine Crankshafts and Bearings Based on Network Flow Programming
基于網絡流規劃的內燃機曲軸與軸瓦選配方法
