cladding

美 [?klæd??] 　英 ['klæd??]

• n.鍍層；保護層
• v.“clad”的現在分詞
• 網絡包層；覆層；覆蓋層

同義詞

英漢雙解

英漢解釋

英英解釋

例句

As a new technique for changing the surface properties, laser cladding shows the unique advantages for producing HA bioceramic coatings.

激光熔覆作為表面改性的新技術，在制備HA生物陶瓷涂層方面顯示出獨特的優越性，所得涂層質量明顯優于其它制備技術。

But in an attempt to liven up the Baja, it ladled on plastic body cladding and painted early models a garish silver and yellow.

不過它車身的塑料鍍層太多，而且早期車型噴涂的銀色加黃色的車漆搭配也太乍眼了。

There's no interior cladding, vapor comes out of ducts in the ceiling, and the only windows are too high to see out of.

飛機上沒有內部熔覆層，頂部的通道管道會噴出蒸汽，窗戶都開得很高，無法朝外看。

The early years saw only the manufacture of a neat plaster that was used for internal cladding of walls and ceilings.

頭幾年人們只生產一種用于墻壁和天花板內部裝潢的凈粉飾。

One or both of a core layer and a cladding layer are made of a cured product of such a photosensitive resin composition.

以及光致產酸劑，其芯層和覆蓋層中的一種或兩種均由固化產物制備。

The laser cladding processing was applied to carry out cladding bronze alloy on the surface of nodular cast iron.

運用激光熔覆方法在球墨鑄鐵基體上熔覆銅合金涂層。

The golden cladding of the Visitor Center echoes the "solar bark" , one of the motifs depicted on the Sky Disc.

金熔覆的游客中心相呼應的“太陽能樹皮”，其中一個圖案描繪的天空光盤。

Thirdly, the surface hardness of the laser cladding coatings are much higher than the plasma spray welding coatings.

激光熔覆層的表面硬度也遠高于等離子噴焊層。

The thermal shock resistance test indicates that the surface modification cladding is very stable and shows firm adherence.

熱穩定性測試表明表面改性層非常穩定并具有良好的結合性。

The fuel rods could still get hot enough to damage their cladding and release radioactive particles into the air.

它們仍可能持續升溫并破壞防護設施、將放射性粒子散入空氣中。

The cladding of the cooler can be altered to any color scheme matching every interior.

冷水器的涂層可以被改變為任何符合每個內部環境的顏色方案。

The results of tests show that fatigue life of steel specimens treated with laser cladding can be considerably increased.

試驗結果表明：激光熔覆處理在優選參數條件下，能顯著地提高鋼試件的疲勞壽命。

Results show that ability of corrosion - resistant of the bioceramic coating could be the best among three materials by laser cladding.

結果表明，在一定激光熔覆條件下制備的稀土生物陶瓷涂層復合材料比鈦合金、未加稀土的涂層材料耐腐蝕能力強。

The method of control volume and straights fitting curve are used for computer simulation continuous casting process for roll cladding.

數值模擬軋輥復合層連續鑄造，采用分段直線擬合曲線和控制容積法。

The corners will be of smooth curved glass, contrasting markedly with the more textured curtain wall cladding the body of the tower.

角落開始會是光滑弧形的玻璃，與質感更強的幕墻塔身形成對比。

A beam of light moves through this constant density in a straight line until it reaches the interface of the core and cladding.

光速以直線的形式通過這種密度相同的纖芯傳播，直到它抵達纖芯與包層的界面。

From its structure to its facade cladding, the project is composed largely of timber.

從結構到表面，這個建筑大部分都被木頭覆蓋。

The exterior is faced with horizontal, open-jointed cedar batten cladding, which further emphasises the geometry of the building.

外立面雪松板覆層，更加強調了建筑的幾何造型。

Corrosion resistance: check cladding material with salt test machine , the test pass at least 24 hours later , then it is qualified .

耐蝕性：以鹽霧測試機檢測鍍層，其至少要24小時以上鹽霧測試通過，才視之為合格。

Laser cladding is an advanced surface modification technique, having high potential in manufacturing wear-resistant coatings.

激光熔覆技術是一種先進的表面改性技術，在制造耐磨涂層方面具有廣闊的前景。

Laser cladding is an effective technology to enhance wear resistance of stainless steel surface by changing composition and microstructure.

激光熔覆技術通過改變不銹鋼表面成分和組織可顯著提高耐磨性能。

Through exposing the cladding photosensitive fiber to periodic ultraviolet, the new cladding index modulated fiber grating can be formed.

新型包層折射率調制光柵可以由包層摻雜的光敏光纖經過側面紫外曝光制成。

The microhardness of the cladding layer was measured by microhardness tester, and its microstructure was observed by SEM.

利用維氏硬度計測試了其顯微硬度，用掃描電鏡分析了激光熔覆層的微觀形貌。

The stress distribution of cladding layer can be ameliorate with preheating before cladding and thermal retardation after cladding.

熔覆件整體的熔前預熱和熔后保溫。可以改善熔覆層的應力分布。

Combined with the characteristics of tapered fiber, the property of energy transfer in cladding are investigated in experiment.

結合錐形光纖本身特點對包層傳能進行實驗研究。

EXTERIOR BUILDING PAINTS. CONVENTIONAL DETERMINATION OF THE WATER PERMEABILITY OF MICROPOROUS CLADDING PAINTS.

建筑物外部涂料.飾面用微孔涂料水滲透性的常規測定

As shown in Figure 7. 4, it consists of three distinct regions: a core, the cladding, and a sheath or jacket.

正如圖7.4所示，它由三個不同的區域：一個核心，包層和護套或夾克。

So our product, made out of collagen, collagen is a natural haemostatic that induces a reaction of cladding.

我們的產品呢，由膠原蛋白制成，膠原蛋白是一種自然的止血劑，有包覆的作用。

The sensor consists of two LPG sections exciting different order cladding modes and having different cladding diameters.

該傳感器由兩段LPG組成，兩段LPG所激發的包層模階數不同，且兩段LPG的包層直徑也不同。

with at least 3 5 years experience in curtain wall cladding , preferably civil engineering licensed or any related course.

對幕墻方面至少有35年的工作經驗，為土木工程系或任何相關專業畢業（持有專業證書）。

Cladding layers with good shape, low dilution rate and high hardness can be gotten by optimizing laser cladding parameters.

通過優化工藝參數，獲得了形貌良好、稀釋率低和高硬度的激光熔覆層。

The single- storey building was created on a tight budget, using materials that included coloured, polycarbonate cladding and plywood.

在單層建筑物已建立在預算很緊，使用的材料，包括顏色，聚碳酸酯熔覆和膠合板。

EXTERIOR BUILDING PAINTS. DETERMINATION OF THE ALKALI RESISTANCE OF MICROPOROUS CLADDING PAINTS.

建筑物涂料.飾面用微孔涂料堿基含量測定

The fins can be delivered with or without a cladding depending on application.

取決于其應用，該散熱片可以在有覆層或沒有覆層下交貨。

The alloying elements of the cladding weld, indicated in the table, shall be checked using a proven quantitative analytical technique.

列于下表中的復層焊縫合金元素應采用已驗證過的定量分析技術檢驗。

The two colours on the exterior cladding, red and beige are borrowed from the original colours of those wall paintings.

外墻覆蓋層的兩種顏色——紅色和米黃色源自那些壁畫的原色。

Decoration: Partitions, wall cladding, indoor or outdoor decoration, air conditioning ducts, windows and false ceilings.

裝修：分區，幕墻玻璃、室內或室外裝飾、空調管道、窗戶和人工天花。

Curtain walling is another location in which PV cladding might be used .

幕墻體系是PV覆蓋層可能應用的另一領域。

Self-supporting metal sheet for roofing, external cladding and internal lining. Product specification and requirements.

應用于建筑屋頂，建筑外圍護、內襯的自支撐式金屬薄板制品。產品的技術規格與性能要求。

With utilizing magnetron control technology, the cladding welding quality the stability of cladding welding process are improved.

利用磁控技術，提高了帶極堆焊的表面成形質量，改善了焊接過程的穩定性。