hydroforming
美 ['ha?dr??f?rm??] 
英 ['ha?dr?f?:m??]
- n.【化】加氫重整
- 網絡液壓成形；臨氫重整；液力成形
英漢解釋
英英解釋
例句
In hydroforming applications hydraulic presses are used for closing hydroforming dies.
在內高壓的應用中，液壓機用于閉合內高壓成形模具。
Sheet hydroforming has proven to be an effective method for manufacturing complicated parts.
板充液成形已被證明是制造復雜零件一種有效的方法。
The Hydroforming Press is equipped with Interlaken's UniPress Control System for reliable and precise control over the hydroforming process.
內高壓成形新聞配備了因特拉肯的UniPress公司控制系統的可靠和準確的對成形過程控制。
The technology of tube hydroforming has gained wide range application over the last few years.
管材液壓成形技術近來獲得了廣泛的應用。
A significant technique named hydroforming, by which many hollow light components can be produced, is presented to balance the contrast.
內高壓成形技術正是適應這種需求而提出來的一種制造空心輕體構件的新工藝。
The support flanges are formed by pinching the blank during the hydroforming process to provide a double thickness flange.
在液壓成形工藝期間，通過擠壓坯料形成支撐凸緣，以提供雙厚度凸緣。
The hydroforming technology is widely used today in the mass production of lightweight components for the automotive industry.
液壓成形技術的廣泛使用是今天在大規模生產的輕型部件為汽車行業。
It has been experimentally indicated that moderate wrinkling will make a contribution to enhancing the formability of tube hydroforming.
實驗結果表明，適度的起皺有助于提高薄壁管內高壓成形的成形極限。
With superior control over forces and motions, Interlaken's Hydroforming Press provides a greater overall quality of formed parts.
隨著對力和運動控制優勢，因特拉肯的內高壓成形媒體提供了更大的組成部分的整體素質。
When the thickness of tube increase, the formability of the tube is better too, but the internal pressure for tube hydroforming is higher.
隨著管材厚度的增加，管材的成形性能也會越好，但所需的成形壓力也越高。
Hydroforming & Warm FormingInterlaken's Hydroforming Press Systems are for use in production or process development applications.
內高壓成形及熱成型因特拉肯的內高壓成形壓機系統是在生產或工藝開發應用。
Sheet warm forming process, sheet warm hydroforming process and sheet press forging process are introduced in this paper.
本文介紹了鎂合金薄壁板材的溫熱沖壓成形技術、溫熱液壓成形技術和局部熱沖鍛成形技術。
and simulation of the T-tube hydroforming was performed through finding an appropriate load path.
2建立有限元模型，找出了合適的加載路徑，進行了液壓脹形仿真。
Tube hydroforming is a developing technology with advanced features of lightweight and single part.
管液壓成形為具輕量化與一體化特徵的新興成形技術。
Unsymmetrical Y-shaped tube hydroforming is applied broadly and it is a difficult point as well.
非對稱Y型三通管內高壓成形是該項技術中應用較為廣泛的部分，同時也是一個難點。
The hydroforming of bulging in the middle of a tube was studied.
選擇圓管中間膨脹的液壓成形為研究對象。
It is important to design the loading path correctly during the tube hydroforming process.
確定合理的加載路徑是管件液壓成形工藝設計的關鍵。
It is showed that the method of optimization design can meet the need of hydroforming a car beam with high forming quality.
驗證結果表明，該優化方法能夠獲得滿足質量要求的充液成形的汽車橫梁。
An algorithm for tube hydroforming was presented, which was based on the dynamical explicit method and BT element.
根據動力顯式增量有限元方法和BT殼單元提出了液壓脹形模擬算法。
Research on hydroforming of square-section hollow components made of stainless steel
不銹鋼方形截面空心構件內高壓成形研究
Tailor-welded tube in hydroforming and influence of the heat affected zone on bulge forming
焊縫管液壓成形技術及熱影響區對成形的影響
Investigation on the Corner-filling Ability and Formability of Tube in Hydroforming with Radial Crushing
徑壓脹形中管材的填充性及成形性分析
Effects of loading paths on thickness distribution of a hydroforming component
加載路徑對內高壓成形件壁厚分布影響分析
Study of Hydroforming Technology Data Collecting System
液壓成形技術數據采集系統的研究
Present Situation of Tube Hydroforming and Its Applications in the Automobile Industry
管件內高壓成形及其在汽車工業中的應用現狀
Hydroforming of Rear Axle Arm Part used for a Car
轎車后軸縱臂內高壓成形研究
Research and development of a computer control hydraulic press for tube hydroforming process
計算機控制管件液壓成形液壓壓力機的研制
Hydroforming of Compensator Joints Numerical Simulation
補償器接頭內高壓成型數值仿真
Safety Assessment of Hydroforming Equipment on Semi- quantitative Risk- based Analysis
基于半定量風險分析的加氫裝置安全評估
Design and Manufacture of the Hydroforming Equipment for Complex Metal Sheet Parts
復雜沖壓件液壓成形裝備的設計與制造
Sheet hydroforming and its related production design
板金液壓柔性技術及其產品設計
Estimation of Residual Contact Pressures in CRA-lined Pipe Manufactured by Hydroforming Process
復合管液壓成形裝置及殘余接觸壓力預測
Numerical modeling of pre-forming process design in hydroforming automobile subframe
汽車副架液壓脹形預成形工藝設計的數值模擬
The Hydroforming Process with Radial Self-energizing Seal for Manufacturing Bimetal-lined Pipe
基于徑向自緊密封的雙金屬復合管液壓成形
Effect of the feeding pressure on experiment of hollow crankshaft hydroforming
補料壓力對內高壓成形空心曲軸影響的實驗研究
Recent developments of the advanced sheet hydroforming
先進板材液壓成形技術及其進展
The application of hydroforming technology in automobile industry
內高壓成形技術在汽車工業中的應用
Failure Analysis and Countermeasures of Tube Hydroforming Process
管子液壓脹形工藝的缺陷分析及對策
Mechanism Analysis on Reducing Pressure of Tube Hydroforming through Preform
通過預成形降低內高壓成形壓力的機理分析
Research on square lightweight component by hydroforming process
方截面輕體件的內高壓成形研究
